AC Infinity

Features Samsung LM301H EVO LEDs each rated at 3.14 µmol/J PPE, the highest efficiency of LM301B, LM301H, and Bridgelux 3030 chips. Programmed with schedule controls, sunrise/sunset dimming, and 10 brightness levels; UIS™ platform-compatible for WiFi app control.Bar-style fixture with algorithmically spaced diodes optimized for even coverage, deep canopy penetration, and hotspot reduction.Passive cooling LED driver is removable to balance heat dissipation; also supports daisy-chaining with up to 80 grow lights.6 x 6 ft. Veg. Coverage | 5 x 5 ft. Flower Coverage | Samsung LM301H EVO Chips | 2688 Diodes | 730W | 2013 PPFD | ETL Cert. 5021417 Product DescriptionAn indoor plant grow light designed for grow tents and large grow spaces to improve your plant's growth rate and its yields. Utilizes Samsung LM301H EVO diodes that are algorithmically spaced on a bar-style form factor to evenly distribute lighting coverage while diminishing hotspots. Its modular design enables you to remove the driver to remotely mount it away from this fixture and balance heat dissipation. This heat dissipation is supported by its steel and aluminum build, which enables magnetic mounting and is IP-65-rated to withstand humid environments. This grow light meets ETL standards (certificate #5021417) for electrical appliance safety, ensuring secure use in lighting applications. The included smart controller features schedule programming and daisy-chain support to connect more bar LED grow lights in a linear arrangement by using splitter dongles (sold separately). This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment. Industry-Leading LED ChipsEach IONFRAME light features genuine Samsung LM301H EVO diodes, the latest in horticulture lighting technology that emits intense brightness at greater efficiency. This performance is superior to leading Samsung LM301H and LM301B LEDs, as well as Bridgelux 3030, and other previous-generation LEDs. EVO diodes help improve plant growth by emitting greater light quality and more light output per diode, with a higher blue spectrum and greater efficiency when compared to non-EVO diodes. The IONFRAME EVO is supported by an array of (8) 395 nm UV diodes, (88) 660 nm OSRAM red diodes, and (8) 730 nm OSRAM far-red diodes to complete its full spectrum light output. Schedule and Brightness ControlsThe included schedule controller can automatically adjust light based on the time of day. It features 10 light intensity levels and a scheduling mode that will cyclically activate this grow light. Customize this daily cycling with an innovative sunrise and sunset setting that gradually brightens and dims the lighting to accurately replicate the sun's movement. Use this grow light with an advance UIS controller like CONTROLLER 69 PRO to fully automate it by integrating it into the UIS platform. This will enable further access to remote control over WiFi and advance programming like automation and grow recipes when connecting to the AC Infinity app.

Read more less

Designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. Dynamic temperature and humidity programming, with timers, grow cycles, scheduling, minimum speed. Remotely connect to our WiFi app to access advance programs, view climate data, and set automation. Mixed flow design combined with a PWM-controlled EC-motor for a truly quiet and energy efficient performance. Duct Size: 4” | Dimensions: 6.9 x 11.9 x 7.4 in. | Airflow: 205 CFM | Noise: 28 dBA | Bearings: Dual Ball PRODUCT DESCRIPTIONA smart inline duct fan designed to quietly ventilate hydroponic grow rooms, boost heating/cooling to rooms, circulate fresh air, exhaust projects, and cool AV closets. Featuring an inline mixed-flow design, the duct fan can maintain airflow even in high static pressure applications. It is built with a PWM-controlled EC motor for quiet and energy-efficient performance. The motor box containing the fan’s impeller and blades can be detached from the mounted frame for easy cleaning and maintenance. Includes a smart controller with dynamic climate and time-based programming and can connect to multiple UIS devices. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment. SMART CONTROLLERCONTROLLER 69 PRO features smart programming that not only has basic temperature, humidity, and VPD triggers but also allows you to set dynamic fan speeds that would respond based on their changes. Go even further by setting a minimum speed that the fan will run at constantly and would only increase when triggered. Timer, cycle, and schedule modes add custom on-demand activation for various uses. Securely connect to the AC Infinity app via WiFi to utilize automation capabilities from anywhere throughout the day. Access your fan remotely, unlock advance programs, set notifications, view historical climate charts, and export CSV data. This controller can connect to up to four UIS devices which includes products like the CLOUDLINE, CLOUDRAY, and IONFRAME Series. It can also connect to your favorite grow light and outlet device from outside the UIS platform using select adapters. QUIET AND ENERGY EFFICIENT DESIGNUnlike common duct fans that use an AC motor which is loud and unmanageable, this duct fan features an EC motor that is controlled using PWM (Pulse Width Modulation). This technology enables motors to be able to run smoothly at extremely low RPM speeds without generating additional heat or noise. In addition, the duct fan uses a mixed flow design using a stator blade and dual hydrodynamic wind circles. This gives it a high static pressure rating, enabling it to deliver airflow even in applications where air movement is restricted. The motor houses dual ball bearings rated at 67,000 hours which allows the duct fan unit to be mounted in any direction. The unit is IP44 rated to be highly resistant to dust and liquids and performs well even in harsh environments. APPLICATIONSThis quiet duct fan system is popular in a variety of applications including cooling AV equipment rooms, closets, racks, and cabinets. Due to its low noise and advanced control features, it’s also used in various air circulation and ventilation projects including hydroponic grow rooms and tents, exhausting bathrooms and attics, and other installations.

Read more less

Designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. Dynamic temperature and humidity programming, with timers, grow cycles, scheduling, minimum speed. Remotely connect to our WiFi app to access advance programs, view climate data, and set automation. Mixed flow design combined with a PWM-controlled EC-motor for a truly quiet and energy efficient performance. Duct Size: 6” | Dimensions: 7.9 x 12.6 x 8.4 in. | Airflow: 402 CFM | Noise: 32 dBA | Bearings: Dual Ball PRODUCT DESCRIPTIONA smart inline duct fan designed to quietly ventilate hydroponic grow rooms, boost heating/cooling to rooms, circulate fresh air, exhaust projects, and cool AV closets. Featuring an inline mixed-flow design, the duct fan can maintain airflow even in high static pressure applications. It is built with a PWM-controlled EC motor for quiet and energy-efficient performance. The motor box containing the fan’s impeller and blades can be detached from the mounted frame for easy cleaning and maintenance. Includes a smart controller with dynamic climate and time-based programming and can connect to multiple UIS devices. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment. SMART CONTROLLERCONTROLLER 69 PRO features smart programming that not only has basic temperature, humidity, and VPD triggers but also allows you to set dynamic fan speeds that would respond based on their changes. Go even further by setting a minimum speed that the fan will run at constantly and would only increase when triggered. Timer, cycle, and schedule modes add custom on-demand activation for various uses. Securely connect to the AC Infinity app via WiFi to utilize automation capabilities from anywhere throughout the day. Access your fan remotely, unlock advance programs, set notifications, view historical climate charts, and export CSV data. This controller can connect to up to four UIS devices which includes products like the CLOUDLINE, CLOUDRAY, and IONFRAME Series. It can also connect to your favorite grow light and outlet device from outside the UIS platform using select adapters. QUIET AND ENERGY EFFICIENT DESIGNUnlike common duct fans that use an AC motor which is loud and unmanageable, this duct fan features an EC motor that is controlled using PWM (Pulse Width Modulation). This technology enables motors to be able to run smoothly at extremely low RPM speeds without generating additional heat or noise. In addition, the duct fan uses a mixed flow design using a stator blade and dual hydrodynamic wind circles. This gives it a high static pressure rating, enabling it to deliver airflow even in applications where air movement is restricted. The motor houses dual ball bearings rated at 67,000 hours which allows the duct fan unit to be mounted in any direction. The unit is IP44 rated to be highly resistant to dust and liquids and performs well even in harsh environments. APPLICATIONSThis quiet duct fan system is popular in a variety of applications including cooling AV equipment rooms, closets, racks, and cabinets. Due to its low noise and advanced control features, it’s also used in various air circulation and ventilation projects including hydroponic grow rooms and tents, exhausting bathrooms and attics, and other installations.

Read more less

Designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. Dynamic temperature and humidity programming, with timers, grow cycles, scheduling, minimum speed. Remotely connect to our WiFi app to access advance programs, view climate data, and set automation. Mixed flow design combined with a PWM-controlled EC-motor for a truly quiet and energy efficient performance. Duct Size: 8” | Dimensions: 8.5 x 11.9 x 9.2 in. | Airflow: 807 CFM | Noise: 39 dBA | Bearings: Dual Ball PRODUCT DESCRIPTIONA smart inline duct fan designed to quietly ventilate hydroponic grow rooms, boost heating/cooling to rooms, circulate fresh air, exhaust projects, and cool AV closets. Featuring an inline mixed-flow design, the duct fan can maintain airflow even in high static pressure applications. It is built with a PWM-controlled EC motor for quiet and energy-efficient performance. The motor box containing the fan’s impeller and blades can be detached from the mounted frame for easy cleaning and maintenance. Includes a smart controller with dynamic climate and time-based programming and can connect to multiple UIS devices. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment. SMART CONTROLLERCONTROLLER 69 PRO features smart programming that not only has basic temperature, humidity, and VPD triggers but also allows you to set dynamic fan speeds that would respond based on their changes. Go even further by setting a minimum speed that the fan will run at constantly and would only increase when triggered. Timer, cycle, and schedule modes add custom on-demand activation for various uses. Securely connect to the AC Infinity app via WiFi to utilize automation capabilities from anywhere throughout the day. Access your fan remotely, unlock advance programs, set notifications, view historical climate charts, and export CSV data. This controller can connect to up to four UIS devices which includes products like the CLOUDLINE, CLOUDRAY, and IONFRAME Series. It can also connect to your favorite grow light and outlet device from outside the UIS platform using select adapters. QUIET AND ENERGY EFFICIENT DESIGNUnlike common duct fans that use an AC motor which is loud and unmanageable, this duct fan features an EC motor that is controlled using PWM (Pulse Width Modulation). This technology enables motors to be able to run smoothly at extremely low RPM speeds without generating additional heat or noise. In addition, the duct fan uses a mixed flow design using a stator blade and dual hydrodynamic wind circles. This gives it a high static pressure rating, enabling it to deliver airflow even in applications where air movement is restricted. The motor houses dual ball bearings rated at 67,000 hours which allows the duct fan unit to be mounted in any direction. The unit is IP44 rated to be highly resistant to dust and liquids and performs well even in harsh environments. APPLICATIONSThis quiet duct fan system is popular in a variety of applications including cooling AV equipment rooms, closets, racks, and cabinets. Due to its low noise and advanced control features, it’s also used in various air circulation and ventilation projects including hydroponic grow rooms and tents, exhausting bathrooms and attics, and other installations.

Read more less

World renown CLOUDLINE AC INFINITY T-Series offers a smarter way to manage your grow room. The Cloudline fan delivers a refinement unmatched in the industry, with quieter operation and smart controller capabilities the hard work is made easy. Full Fan, Filter & Ducting Packages can be found here Specifications: Cloudline T10-SeriesIntelligent AI controllerBluetooth and WiFi ControlRemote Temperature/Humidity ProbePower Consumption: 250watts MAXAirflow: 1201 CFMNoise: 48dBAMixed Flow Fan DesignIP44 Rating230v/240v NZ Standard Voltage1.8m 3-Pin Power LeadSAA Certification pdf The T-Series features the Intelligent Bluetooth & Wifi Controller with programmable parameters to suit any situation. Humidity and temperature targets with variable speeds to regulate and maintain set points with the included, remote temperature/humidity sensor. Built-in alarms can be set if parameters are exceeded. Connecting through the AC INFINITY app you have the ability to remotely manage and track your systems operation, with data logging and security. Using Pulse Width Modulation (PWM) offers total control over the EC motor used in the AC INFINITY Inline Fans. This means the fan can run at accurately set airspeeds when a balance of airflow and noise is a must, from whisper-quiet breeze to west-coast gale and everything in between. These can be used in a variety of applications where temperature and humidity control is required. From server rooms to bathroom ventilation. Fitted as standard with a AUS/NZ 3-pin power cable makes these a plug and play solution and can easily be hard wired when required.

Read more less

 CONTROLLER AI+ | Smart AI-Powered Grow System Controller Take your grow to the next level with CONTROLLER AI+, the revolutionary AI-driven smart controller that learns and adapts to your environment. Designed to automate equipment, optimize climate conditions, and provide real-time insights, this cutting-edge system ensures unparalleled precision in your grow space. Smart Automation with AI-Powered InsightsLet AI analyze climate patterns and anticipate environmental fluctuations, adjusting device output dynamically to maintain optimal conditions. Whether controlling temperature, humidity, or VPD, CONTROLLER AI+ fine-tunes your setup for peak performance. Total Control from AnywhereManage your grow from anywhere with the AC Infinity app via Wi-Fi, offering:✔ Real-time AI insights for smarter adjustments✔ Custom grow guides, alerts, and performance tracking✔ Interactive AI chat support for tailored advice✔ Advanced programming including triggers, timers & min/max settings Ultimate Compatibility & ExpandabilitySync up to 32 UIS™ devices—including fans, grow lights, humidifiers, heaters, and A/C units, plus compatible third-party outlet devices. Monitor your grow with dual-zone sensors for temperature, humidity, and VPD, with optional CO₂, hydro, and soil sensor add-ons (sold separately) for advanced setups. Adaptive Learning for Smarter GrowingCONTROLLER AI+ continuously learns from past data, preventing extreme spikes and fine-tuning climate adjustments for long-term stability.  Choose from:-Beginner Mode – AI takes full control, adjusting settings based on your plant type and connected devices.-Advanced Mode – Customize every parameter for precise environmental control.

Read more less

Next-gen clip fan re-engineered for longer-lasting, tailored circulation in grow space environments. Larger brushless EC motor with carbon steel gears and IP54 rating is redesigned to maximize oscillation lifespan.10 oscillation levels can focus on targeted areas or achieve wide coverage while avoiding obstacles.Features 10 speeds and 10 dynamic wind modes to simulate outdoor airflow for optimal plant growth.Links with UIS controllers for WiFi app control and access to climate triggers, timers, and advance automation. PRODUCT DESCRIPTIONA highly innovative clip fan completely redesigned to deliver targeted circulation and optimize each stage of your plant’s grow cycle. Access ten digital speeds plus ten dynamic wind modes for customizable airflow that varies between levels to simulate an outdoor environment. For even greater control, utilize the ten oscillation levels which deliver focused circulation to specific spots or offer the widest reach possible. This circulation fan is IP54-rated to maintain peak performance during continuous use even in high humidity and temperature. It also meets ETL standards (certificate #5027708) for electrical appliance safety, ensuring secure use in air circulation applications. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to unite with the AC Infinity app over WiFi to achieve your ideal environment. TAILORED, CUSTOM AIRFLOWGet unprecedented customization capabilities for complete airflow control using this grow tent clip-on fan’s 10 speed levels, 10 dynamic wind modes, and 10 oscillation settings. Uniquely tailor each stage of development for a wholly personalized growing experience. Our wide selection of dynamic modes lets you decide the maximum strength of your varying wind flow, ensuring healthier growth with reduced stress on your plants. The oscillation range offers total tent coverage being able to avoid obstacles. With this, you can set precise circulation for any plant growth stage, from ultra-gentle breezes for germination and seedlings to a powerful airflow for vegetative and flowering. REDESIGNED MOTORFeatures a robust EC motor that is specially redesigned in size and construction to lengthen oscillation lifespan. It utilizes a brushless motor design, resilient carbon steel gears, and dual-ball bearings for omnidirectional mounting. It is also IP54-protected to withstand the most humid grow spaces. These components come together to create the heaviest-duty clip fan build that is long-lasting, energy-efficient, and can generate powerful circulation.  

Read more less

 CLOUDRAY S9, Grow Tent Clip Fan 9” with Long-Life EC Motor, 10-Level Dynamic Wind Modes & Fan Speeds, 10-Level Auto Oscillation A 9-inch clip-on fan engineered for longer-lasting, tailored circulation in grow space environments.Larger brushless EC motor with carbon steel gears, dual-ball bearings, and is IP54-rated to maximize lifespan.10 oscillation ranges can focus on targeted areas or achieve wide coverage while avoiding obstacles.Features 10 speeds and 10 dynamic wind modes to simulate outdoor airflow for optimal plant growth.Links with UIS controllers for WiFi app control and access to climate triggers, timers, and advance automation.  Product DescriptionA highly innovative clip fan designed to deliver targeted circulation and optimize each stage of your plant’s grow cycle. Access ten digital speeds plus ten dynamic wind modes for customizable airflow that varies between levels to simulate an outdoor environment. For even greater control, utilize the ten oscillation levels that deliver focused circulation to specific spots or offer the widest reach possible. This circulation fan is IP54-rated to maintain peak performance during continuous use in high humidity and temperature. It also meets ETL standards (certificate #5027708) for electrical appliance safety, ensuring secure use in air circulation applications. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to unite with the AC Infinity app over WiFi to achieve your ideal environment. Tailored, Custom AirflowGet unprecedented customization capabilities for complete airflow control using this grow tent clip-on fan’s 10 speed levels, 10 dynamic wind modes, and 10 oscillation settings. Uniquely tailor each stage of development for a wholly personalized growing experience. Our wide selection of dynamic modes lets you decide the maximum strength of your varying wind flow, ensuring healthier growth with reduced stress on your plants. The oscillation range offers total tent coverage, being able to avoid obstacles. With this, you can set precise circulation for any plant growth stage, from ultra-gentle breezes for germination and seedlings to a powerful airflow for vegetative and flowering. Redesigned MotorThis clip fan features a robust EC motor specially designed in size and construction to lengthen oscillation lifespan. Its clamp is re-engineered with a compact metal build that saves space in your grow tent and uses a vise grip-like design for greater security on tent poles. Other reinforced features include a brushless motor design, resilient carbon steel gears, and dual-ball bearings for omnidirectional mounting. These components create the heaviest-duty clip fan that is long-lasting, energy-efficient, and can generate powerful circulation.

Read more less

Product DescriptionThe Cloudlab grow tent is engineered to deliver complete control over your indoor growing environment. Built with professional-grade materials and expert craftsmanship, it creates a sealed, stable climate to grow plants year-round. Whether you’re growing in a closet, basement, or spare room, this tent is built to perform at every stage of your grow. Premium Build QualityConstructed with ultra-durable 2000D oxford canvas, the CLOUDLAB grow tent also features reinforced 22 mm diameter poles—stronger than the standard 18 mm poles used in most grow tents. Featuring additional hanging bars, the tent is built to support up to 250 pounds of heavy equipment for long-term use. Reinforced tent corners and a heavy-duty floor tray provide added strength and protection, while the front zipper flaps and 500G light-proof layer offer another level of defense against light leaks. Organize your grow accessories inside or outside the tent using the convenient detachable tool bag. Additional cinched duct ports allow you to easily install humidifiers, heaters, or A/C units without compromising the seal. The Ultimate Grow Tent — created by combining industry-leading materials and superior craftsmanship with the latest tech in indoor growing.Strongest 1 in. steel poles, thickest 2000D canvas, reengineered mylar lab-tested to have the highest light reflectivity among all grow tents.Taller windows provide a full view of your grow while maintaining climate control, with SBS™ zippers that make it easy to open and close.Innovative controller mounting plate with lightproof cable passthrough and additional duct ports for humidifiers, heaters, and A/Cs.Features front zipper flaps as an extra layer of protection against light leaks, heavy-duty catch tray, extra hanging bars, reinforced tent corners.

Read more less

An advanced grow tent designed to create optimal climate conditions for year-round plant cultivation indoors.Features durable frame that uses 50% thicker steel poles and carries 2x more weight than standard grow tents.Higher density 2000D canvas prevents light leaks while diamond mylar amplifies light reflectivity.Future-ready design featuring controller mounting plate with passthrough for no light-leak cable management.60” x 60” x 80” | 10 Plant Capacity | Viewing Window | Accessories: Reflective Floor Tray & Tool Bag A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for higher durability and light-proofing. Cross-patterned diamond mylar lines the surface of the inner walls, which will reflect and maximize output from your grow light. To ensure maximum reflectivity and prevent light leaking, an inner ribbon stitching creates a seal that lines the zippers inside the grow tent. Additionally, the duct ports’ double cinching design closes them on either side to reinforce the light-proof sealing. Accessories include a waterproof floor tray, a built-in tool bag, and a mounting plate to install your controller onto the grow tent. PREMIUM BUILD QUALITYThis growing tent is reinforced by its frame’s steel construction, utilizing 22 mm diameter poles compared to standard grow tents’ 18 mm poles. The corner pieces share the same rigidity that keeps the tent upright and sturdier than others. This, along with its roof beams, enables up to 150 pounds of grow equipment support when hung at intersecting points. A metallic finish protects the steel poles from long term wear and tear while presenting a clean aesthetic. APPLICATIONSThe CLOUDLAB series enables you to grow your desired plant year-round and is specially made for gardening indoors. Place it in any room in your home such as your closet, basement, guest room, or garage. Opening the air venting screen or pairing the floor duct port with an intake fan will allow fresh air to enter the grow tent. Peel back the window flap to track progress while preserving the climate of the inner space, where the tool bag stores and organizes your grow accessories.

Read more less

Product Description A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for greater durability and light-proofing. Cross-patterned diamond mylar lines the surface of the inner walls, which will reflect and maximize output from your grow light The genuine SBS™ zippers ensure maximum convenience by smoothly and securely gliding along the track. An inner ribbon stitching creates a seal that lines the SBS™ zipper inside the grow tent to ensure maximum reflectivity and prevent light leaking. This is paired with a protective cover that runs the length of the front zipper for further protection against intrusive lighting. The duct ports can also close on either side to reinforce this light-proof sealing. Accessories include a waterproof floor tray, a detachable tool bag, additional roof hanging bars, and a mounting plate to install your controller onto the grow tent. An advanced grow tent designed to create optimal climate conditions for year-round plant cultivation indoors.Features durable frame that uses 50% thicker steel poles and carries 2x more weight than standard grow tents.2000D canvas with front zipper cover prevents light leaks while diamond mylar amplifies light reflectivity.Future ready design featuring controller mounting plate with passthrough for no light-leak cable management.

Read more less

Powerful 1000W heater with smart AI control and a multi-configuration design to optimize the climate for all plant growth stages.Temperature and VPD programming powered by adaptive AI that dynamically adjusts output to maintain your target environment.Utilizes individual PTC plates with PWM control to deliver 10 true heat levels or intake fresh air for balanced climate control.Dual ports enable you to duct directly into your grow space or create a closed-loop setup for optimal heating efficiency (ducting not included).Connects with UIS controllers for WiFi app connectivity—unlocking advanced automations, data tracking, alerts, and grow guides  Intelligent Climate Control for Every Growth StageExperience precision-engineered climate management with this powerful 1000W AI-driven heater. Designed to optimize growth through every stage, it automatically adjusts temperature, airflow, and VPD to maintain your target environment. Individual PTC plates with PWM control deliver 10 true heat levels or fresh air intake for balanced conditions, while dual duct ports support both open- and closed-loop setups for versatile integration. This product is ETL-certified with safety features including tip-over alarms, flame-retardant materials, and overheat protection with auto-restart it delivers performance you can trust. Designed exclusively for indoor use. Operate only in controlled environments with humidity between 30%–65% RH, including incoming airflow. Do not use outdoors or in high-humidity areas. Do not use with humidifiers in closed-loop setups. Mist may enter intake ducting and damage the heater. Plug heaters only into a grounded wall outlet with surge protection. Never use extension cords or power strips, as this may cause overheating or melting. Do not share the outlet with other devices. Adaptive AI for Predictive Climate ManagementPowered by adaptive AI, the system continuously learns from your environment to maintain precise temperature and VPD targets. Its intelligent algorithm dynamically adjusts output to match your programmed ranges, responding instantly to environmental fluctuations, throttling in precise percentages to deliver unmatched accuracy and control. When connected through UIS controllers, growers can access real-time data tracking, alerts, and advanced automation to maintain the perfect climate 24/7

Read more less

A next-gen humidifier designed with smart controls and precision vapours to obtain the optimal humidity levels for plant growth. Contains an innovative EC ultrasonic vaporizer that utilizes digital pulses to reach up to 10 levels of moisture output. This will allow you to finely tune your control of moisture levels in your grow space. The onboard controller features smart humidity and timer programming, which is supported by a corded precision humidity sensor. Its digital display provides active humidity readings and can be toggled to be hidden. Also features a built-in automatic shutoff that protects the system when the water reservoir is depleted. Includes a 4.5L water tank and an extendable tube that can reach over 4 feet in length. This product is part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment. SMART HUMIDITY CONTROLThis environmental humidifier features an onboard controller that is equipped with smart humidity and timer programming. Digitally set four levels of moisture output which can be increased to 10 levels with a UIS controller. The included corded sensor probe provides quick readings to ensure swift responses to any changes in climate. Connect to UIS controllers to integrate with other grow equipment and access dynamic climate triggers, grow cycles, and schedules. Connect to the app to control your devices from anywhere, as well as unlock advance automations, alerts, climate charts, CSV data export, and more! DESIGNED FOR GROWERSThis series was designed from the ground up to optimize for grow space environments. The flexible tubing and corded humidity sensor enable the humidifier to be positioned outside the grow tent to save space. This tubing can also extend to reach over 4 feet in length to direct moisture to exact areas of your grow. The backlit display can also be toggled off while the humidifier is operating to prevent disrupting your plant’s light cycle

Read more less

Designed with smart controls and precision vapors to obtain optimal humidity levels for plant growth.Next-gen EC ultrasonic vaporizer can reach up to 10 levels of humidity for fine-tuned moisture control.Interchangeable nozzle heads included for flexible moisture distribution in one direction or a wide area.Features smart humidity and timer programming, hideable backlit display, and auto-start with backup memory.Connects to UIS controllers for dynamic climate triggers, grow cycles, scheduling, alerts, and app control. A next-gen humidifier designed with smart controls and precision vapors to obtain the optimal humidity levels for plant growth. Contains an innovative EC ultrasonic vaporizer that utilizes digital pulses to reach up to 10 levels of moisture output. This will allow you to finely tune your control of moisture levels in your grow space. The onboard controller features smart humidity and timer programming, which is supported by a corded precision humidity sensor. Its digital display provides active humidity readings and can be toggled to be hidden. Also features a built-in automatic shutoff that protects the system when the water reservoir is depleted. Includes a 15L water tank, piping, and interchangeable nozzles that distribute moisture in one direction or a wide area. This product is part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment. SMART HUMIDITY CONTROLThis environmental humidifier features an onboard controller that is equipped with smart humidity and timer programming. Digitally set four levels of moisture output which can be increased to 10 levels with a UIS controller. The included corded sensor probe provides quick readings to ensure swift responses to any changes in climate. Connect to UIS controllers to integrate with other grow equipment and access dynamic climate triggers, grow cycles, and schedules. Connect to the app to control your devices from anywhere, as well as unlock advance automations, alerts, climate charts, CSV data export, and more!

Read more less

Designed to eliminate odors and chemicals for grow tents and hydroponics room. Features premium-grade Australian charcoal with higher adsorption and longer life rating. Contains heavy-duty aluminum flanges, galvanized steel meshing, and clothed pre-filter.Enables maximum airflow passthrough for both intake and exhaust configurations.  Duct Opening: 8” | Length: 20" | Airflow Rating: 770 CFM | Carbon: Australian RC412 at 1200+ IAV | Thickness: 38mm The high-airflow duct filter is designed to use activated carbon to eliminate odors and chemicals, popularly used for hydroponics, grow rooms, kitchens, smoking areas, and other ventilation projects. Features premium-grade Australian Virgin charcoal bed. The filter can be used in conjunction with an inline duct fan to act as both intake and exhaust configuration. Heavy-duty construction contains aluminum flanges and dual-sided galvanized steel mesh. The flanges can also be reversed to prolong the life of the filter. Includes a machine washable pre-filter cloth to prevent carbon residue. PREMIUM GRADE CARBONEach carbon filter features premium-grade Australian Virgin charcoal bed rated at 1200+ IAV. It achieves a 38mm charcoal bed thickness and wider mesh openings thanks to a higher microporosity and surface area rating. This combination not only enables a higher adsorption rate without restricting free airflow, but it also allows the carbon filter to last up to 33% longer.

Read more less

Designed to eliminate odors and chemicals for grow tents and hydroponics room. Features premium-grade Australian charcoal with higher adsorption and longer life rating. Contains heavy-duty aluminum flanges, galvanized steel meshing, and clothed pre-filter.Enables maximum airflow passthrough for both intake and exhaust configurations.  Duct Opening: 6” | Length: 16" | Airflow Rating: 410 CFM | Carbon: Australian RC412 at 1200+ IAV | Thickness: 38mm The high-airflow duct filter is designed to use activated carbon to eliminate odors and chemicals, popularly used for hydroponics, grow rooms, kitchens, smoking areas, and other ventilation projects. Features premium-grade Australian Virgin charcoal bed. The filter can be used in conjunction with an inline duct fan to act as both intake and exhaust configuration. Heavy-duty construction contains aluminum flanges and dual-sided galvanized steel mesh. The flanges can also be reversed to prolong the life of the filter. Includes a machine washable pre-filter cloth to prevent carbon residue. PREMIUM GRADE CARBONEach carbon filter features premium-grade Australian Virgin charcoal bed rated at 1200+ IAV. It achieves a 38mm charcoal bed thickness and wider mesh openings thanks to a higher microporosity and surface area rating. This combination not only enables a higher adsorption rate without restricting free airflow, but it also allows the carbon filter to last up to 33% longer.

Read more less

Wirelessly connects AC Infinity controllers to UIS fans, lights, and smart devices for organized, cable-free grow spaces. Direct 1-to-1 connection with a secure, non-interchangeable ID code for stable, exclusive pairing using a 2.4 GHz frequency. Operates independently of internet for uninterrupted performance—even during network outages. Delivers millisecond-level responsiveness for precision control of temperature, humidity, VPD, timers, and schedules.Compatible with Controller AI+, Controller 69 PRO+, and Controller 69 PRO—built for the industry's largest most reliable grow ecosystem.PRODUCT DESCRIPTIONA remote transmitter designed to wirelessly connect AC infinity controllers to fans, lights, and additional smart devices for use in grow space applications. Engineered for the largest and most dependable grow ecosystem on the market, this secure-link remote transmitter eliminates cable clutter with streamlined wireless control. Operating on a 2.4 GHz frequency, it establishes a direct 1-to-1 connection between your AC Infinity controller and UIS devices using a non-interchangeable ID code—ensuring a secure, exclusive link up to 26 feet away, even through walls. Unlike WiFi-based systems, this transmitter functions independently of internet access, maintaining millisecond-level responsiveness for precision control of temperature, humidity, VPD triggers, timers, and schedules. It’s the performance-driven solution for growers who demand speed, reliability, and simplicity. COMPATIBILITYThis wireless transmitter and receiver generate a single secure pairing with one of the following AC Infinity controllers and UIS devices, including but not limited to: Controller AI+CONTROLLER 69 PRO+CONTROLLER 69 PROCLOUDFORGE Series – HumidifiersCLOUDRAY Series – Clip-on Circulation FansCLOUDLINE Series – Inline Duct FansIONBEAM Series – LED Grow Light BarsIONBOARD Series – LED Grow LightboardsIONFRAME Series – LED Commercial Level Grow LightsTHERMOFORGE Series – Heaters

Read more less

The UIS Plug allows you to automate just about ANYTHING with your AC INFINITY controller, allowing you to cycle equipment based on time, temperature and humidity and so much more! Enables CONTROLLER 69 PRO to work with outlet-powered devices like humidifiers, heaters, dehumidifiers, and A/Cs.Only equipment that can automatically start running when plugged into an outlet are compatible; see below.Control and monitor your grow on your phone from anywhere with CONTROLLER 69 PRO.Automate climate triggers, cycles, timers, and scheduling; unlock data graphs and alert notifications via our app.Our ecosystem of grow equipment works together with CONTROLLER 69 PRO to create your plant's ideal environment.PRODUCT DESCRIPTIONA control plug designed to connect CONTROLLER 69 PRO to outlet devices. By connecting your grow equipment to this smart controller, you can automate it with temperature, humidity, and VPD triggers, scheduling, cycles, timers, and more. It will also join the UIS platform of grow equipment that works together to create the ideal environment for your plants. Our WiFi-enabled smart controller allows you to monitor and control your grow on your phone from anywhere while providing data charts and alert notifications via the AC Infinity app. Only works with equipment that can automatically start running when they receive power from an outlet, see below for compatibility details. Includes a 10-foot UIS cord to connect to CONTROLLER 69 PRO for expanded flexibility when mixing and matching grow equipment. EQUIPMENT COMPATIBILITYOnly outlet devices that can automatically start running when they are plugged into an outlet are compatible. This plug controls equipment to turn on/off by cutting its power or allowing power to pass through its outlet. Devices that require pressing a button to start functioning after being plugged into an outlet cannot be controlled. Types of equipment best used with the control plug include, but are not limited to: HumidifiersDehumidifiersAir Conditioning UnitsHeatersVentilation and Circulation FansGrow LightsSeedling Heat Mats

Read more less

Enables UIS™ controllers to work with RJ11 and RJ12 connector grow lights with resistor dimmers. Control previous gen grow lights using resistor dimming technology. Compatibility list coming soon. Automate light cycles, scheduling, and climate triggers; unlock data graphs and alert notifications via our app. Monitor and control your grow on your phone from anywhere with our latest WiFi-enabled UIS controllers. Our ecosystem of controllers and grow equipment work together to create your plant's ideal environment. Product DescriptionAn adapter dongle designed to connect our UIS controllers to grow lights from other manufacturers. The Type-B adapter works only with grow lights with RJ11 and RJ12 connectors that use resistor dimmers; see below for compatibility list. By connecting your lighting fixture to one of our controllers, you can automate it with light cycles, scheduling, and dynamic responses to temperature and humidity. It will also join the UIS platform of smart controllers and grow equipment, all working together to create the ideal environment for your plants. Our WiFi-enabled smart controllers allow you to monitor and control your grow on your phone from anywhere while providing data charts and alert notifications via the AC Infinity app. Once your first light has connected to the controller, you can control additional RJ11 or RJ12 connector lights using that manufacturer's daisy chain method. Includes a 10-foot RJ11/12 extension cord. Compatible with our controllers with UIS connectors like CONTROLLER 69, CONTROLLER 69 WiFi, CONTROLLER 69 PRO, and Controller AI+. An additional UIS device is required to power the controller. Light CompatibilityMost RJ11 and RJ12 connector grow lights using the resistor dimming standards can work with the Type-B lighting adapter. However, each light manufacturer's dimming protocol is different so some may have a limited dimming range with our controllers. Lights that have spectrum control or utilize a PWM or voltage protocol are not compatible. See our other lighting adapters or the UIS control plug if your light is not compatible. A firmware update via the AC Infinity app may be required for your UIS controller to work with this dongle. Compatible lights include, but are not limited to: CHILLED TECH - GROWCRAFT Series that are compatible with their Push-Lock Dimmer to RJ12 Adapter (Model GC-DIM-TM-RJ12-1).HLG - All models with RJ 0-10V Dimming box, including those with Inventronics drivers.MARS HYDRO - FC, FC-E, SP, and TS Series Models with MOSO/MEANWELL drivers.  See our Type-A adapter if your model has a MARS HYDRO driver.MIGRO - ARAY SeriesSPIDER FARMER - SE and SF Series Models with MOSO/MEANWELL drivers. See our Type-A adapter if your model has a SPIDER FARMER driver.

Read more less

Enables UIS™ controllers to work with RJ11 and RJ12 connector grow lights with PWM or 0-10V dimmers. Control lights from MARS, SPIDER, VIPAR, SUN, VOLT, and more. Not all models are compatible; see below. Automate light cycles, scheduling, and climate triggers; unlock data graphs and alert notifications via our app. Monitor and control your grow on your phone from anywhere with our latest WiFi-enabled UIS controllers. Our ecosystem of controllers and grow equipment work together to create your plant's ideal environment. Product DescriptionAn adapter dongle designed to connect our UIS controllers to grow lights from other manufacturers. The Type-A adapter works only with grow lights with RJ11 and RJ12 connectors that use PWM or 0-10V dimmers; see below for compatibility list. By connecting your lighting fixture to one of our controllers, you can automate it with light cycles, scheduling, and dynamic responses to temperature and humidity. It will also join the UIS platform of smart controllers and grow equipment, all working together to create the ideal environment for your plants. Our WiFi-enabled smart controllers allow you to monitor and control your grow on your phone from anywhere while providing data charts and alert notifications via the AC Infinity app. Once your first light has connected to the controller, you can control additional RJ11 or RJ22 connector light’s using that manufacturer’s daisy chain method. Includes a 10-foot RJ11/12 extension cord. Compatible with our controllers with UIS connectors like CONTROLLER 69, CONTROLLER 69 WiFi, CONTROLLER 69 PRO and Controller AI+. An additional UIS device is required to power the controller. Light Compatibility Most RJ11 and RJ12 connector grow lights using PWM or 0-10V dimming standards can work with the Type-A lighting adapter. However, each light manufacturer's dimming protocol is different so some may have a limited dimming range with our controllers. Lights that have spectrum control or utilize a resistor protocol are not compatible. See our other lighting adapters or the UIS control plug if your light is not compatible. A firmware update via the AC Infinity app may be required for your UIS controller to work with this dongle. Compatible lights include, but are not limited to: BESTVA - Bat and TF SeriesGROWER'S CHOICE - ROI Series (Limited Dimming Range)HYPHOTONFLUX - HPF and PRO SeriesLUMATEK - ZEUS and ATS Series that are compatible with their RJ12 Ethernet Adapter (Limited Dimming Range)MARS HYDRO - FC, FC-E, SP, and TS Series Models with Self-Branded drivers. See our Type-B adapter if your model has a MOSO or MEANWELL driver.MEDIC GROW - EZ and FOLD SeriesMEDIC GROW - MINI SUN Series (Limited Dimming Range)PHANTOM - Pheno 440PHLIZON - FD, PL, and PRO Series (Limited Dimming Range)PHOTONTEK - X, XT, SQ Series that are compatible with their Dimmer to RJ12 Adapter (Limited Dimming Range)SPIDER FARMER - G, SE, and SF Series Models with Self-Branded drivers. See our Type-B adapter if your model has a MOSO or MEANWELL driver.SUNRAISE - Bar SeriesVIPARSPECTRA - KS5000VIVOSUN - VS Series (Limited Dimming Range)VOLT - VL and FL Series

Read more less

Potted plant stand features a patented design that delivers water to fabric pots without active irrigation. Automatically directs water up to your plant's roots using the included adjustable length wick lines. Heavy-duty drip tray collects runoff water for redelivery and can withstand planters up to 100 pounds. Reservoir plate lifts your fabric pot off the ground to keep algae and other buildups from spreading. Included gauge displays the current water level while the strainer spout enables quick replenishment. Product Description A set of wholly original under-trays designed for use with fabric pots to automatically deliver water to eliminate the need for active irrigation. The patented self-watering fabric pot base (US Patent #11877546) directs water up to your plant using high absorption wick lines that moisten the soil and roots. Its heavy-duty saucer stores runoff water and nutrients and, when used with the reservoir plate, can withstand up to 100 pounds. This plate elevates your fabric pot up off the ground to keep algae and other buildups from spreading. A water gauge is included to display water levels in the reservoir while the strainer spout on the other end enables quick pouring and replenishing.

Read more less

Reusable garden grow bags designed to improve plant growth by air pruning roots and draining excess water.Industry-leading thick nonwoven fabric, nylon handles, and reinforced stitching for greater durability.Crafted with a true-to-size capacity while providing more surface area for roots to breathe and prune.Built-in metal rings enable twist-tie passthrough for low-stress plant training without modifications.True Capacity: 7.66 Gallons | Thickness Rating: 500G | Quantity: 5-Pack | BPA-Free Product DescriptionA set of tough, heavy-duty fabric pots designed to promote healthier root structures and easily transport plants. By allowing roots to air-prune themselves, they create even coverage of your soil to best absorb water and nutrients. These fabric pots use thick nonwoven fabric that supports more weight than other planters and provides insulation from inclement weather. This passively regulates their temperature to preserve your plant’s development, while the pot’s permeability prevents you from overwatering them. Its nonwoven fabric is also BPA-free which makes these garden bags environmentally friendly and safe to grow vegetables and other crops in. ApplicationsPaired with durable handles that make transportation easy, these fabric pots feature metal rings that allow twist ties to route through for low stress training, as well as occasional plant hanging. In addition, its heavy-duty, rugged build withstands wear and tear and can be machine-washed for repeat use. Each planter will carry a greater volume of soil when filled to the dual stitch line than other fabric pots, providing more root space for plants to thrive in.

Read more less

Reusable garden grow bags designed to improve plant growth by air pruning roots and draining excess water.Industry-leading thick nonwoven fabric, nylon handles, and reinforced stitching for greater durability.Crafted with a true-to-size capacity while providing more surface area for roots to breathe and prune.Built-in metal rings enable twist-tie passthrough for low-stress plant training without modifications.True Capacity: 5.39 Gallons | Thickness Rating: 500G | Quantity: 5-Pack | BPA-Free A set of tough, heavy-duty fabric pots designed to promote healthier root structures and easily transport plants. By allowing roots to air-prune themselves, they create even coverage of your soil to best absorb water and nutrients. These fabric pots use thick nonwoven fabric that supports more weight than other planters and provides insulation from inclement weather. This passively regulates their temperature to preserve your plant’s development, while the pot’s permeability prevents you from overwatering them. Its nonwoven fabric is also BPA-free which makes these garden bags environmentally friendly and safe to grow vegetables and other crops in. Garden grow bags designed to improve plant growth by air pruning roots and draining excess water.Industry-leading thick nonwoven fabric, nylon handles, and reinforced stitching for greater durability.Crafted with a true-to-size capacity while providing more surface area for roots to breathe and prune.Built-in metal rings enable twist-tie passthrough for low-stress plant training without modifications.True Capacity: 5.39 Gallons | Thickness Rating: 320G | Quantity: 5-Pack | BPA-Free  

Read more less

Reusable garden grow bags designed to improve plant growth by air pruning roots and draining excess water.Industry-leading thick nonwoven fabric, nylon handles, and reinforced stitching for greater durability.Crafted with a true-to-size capacity while providing more surface area for roots to breathe and prune.Built-in metal rings enable twist-tie passthrough for low-stress plant training without modifications.   Product DescriptionA set of tough, heavy-duty fabric pots designed to promote healthier root structures and easily transport plants. By allowing roots to air-prune themselves, they create even coverage of your soil to best absorb water and nutrients. These fabric pots use thick nonwoven fabric that supports more weight than other planters and provides insulation from inclement weather. This passively regulates their temperature to preserve your plant’s development, while the pot’s permeability prevents you from overwatering them. Its nonwoven fabric is also BPA-free which makes these garden bags environmentally friendly and safe to grow vegetables and other crops in.

Read more less

A set of glasses designed to reduce eye strain by blocking UVA/UVB rays while working under grow lights.Lightweight, wraparound style frame provides complete coverage over your eyes and hours of comfort. Three sets of neutralizing lenses give color-accurate vision under all grow lighting conditions.UV 400+ rated and asymmetrically shaped to protect against intense brightness and eliminate distortion. Recommended lenses for each lighting: Green Lens – Red/Blue | Blue Lens – Yellow | Gray Lens – Full Spectrum PRODUCT DESCRIPTIONA pair of grow glasses designed to protect your eyes from harmful UVA and UVB rays while working under intense lighting. Whether you are gardening indoors or outdoors, this lightweight set of horticultural glasses will reduce eye strain to ensure long-lasting comfort. Its wraparound form factor with detachable padded lining reinforces this comfort by providing complete coverage over your eyes to block sunlight. Three sets of interchangeable lenses are included to neutralize different colored lighting and provide you with colour-accurate vision while inspecting your plants. These lenses are asymmetrically shaped and UV 400+ rated to eliminate distortion and diminish light intensity under many types of grow lights. APPLICATIONSThis pair of grow tent glasses is made to neutralize the color of your grow light to reduce eye strain and provide a color-accurate look of your plants. Whether you use LED, HPS, or MHlighting, you can use these colored lenses for the following color temperatures and tints: Green Lens – Purple (Red & Blue)Blue Lens – Amber Yellow/Warm WhiteGray Lens – Full Spectrum and Sunlight

Read more less

CLOUDLINE A6, Quiet Inline Fan with Speed Controller, 6-Inch Designed to quietly ventilate grow tents, exhaust odors, transfer heating/cooling to rooms, and cool AV closets.Features the same build quality and innovations as the CLOUDLINE Series delivered in a value package.Includes a wired 10-speed fan controller; also compatible with all CLOUDLINE Series smart controllers.Mixed flow design combined with an EC-powered motor for a truly quiet and energy efficient performance. Product DescriptionThis inline fan system packs the CLOUDLINE’s core innovations and premium build quality together to bring you a value package. Designed to quietly cool grow tents, rooms, and closets, and provide ventilation in various air circulation and exhaust projects. Containing an inline mixed-flow design, the duct fan can maintain airflow even in high static pressure applications. The motor box containing the fan’s impeller and blades can be detached from the mounted frame for easy cleaning and maintenance. Complete kit includes one inline fan unit, one speed controller, UIS to 4-pin Molex dongle, installation manual, and all necessary mounting hardware. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment. Precise Speed ControllerThe speed controller enables you to set the duct fan’s speed to optimal noise and airflow levels for various environments. This inline fan is equipped with the CLOUDLINE Series’ same EC-motor that is precisely controlled using PWM (Pulse Width Modulation), which enables it to run smoothly at extremely low RPM speeds without generating motor noise. Ten speed options are available with power switch and backup memory. This model can be connected to the following smart controllers to share the same programming and power source as other EC-motor CLOUDLINE fans: B-Series Temperature ControllerT-Series Temperature and Humidity ControllerCONTROLLER 69CONTROLLER 67

Read more less

CLOUDLINE A4, Quiet Inline Fan with Speed Controller, 4-Inch  Designed to quietly ventilate grow tents, exhaust odors, transfer heating/cooling to rooms, and cool AV closets.Features the same build quality and innovations as the CLOUDLINE Series delivered in a value package.Includes a wired 10-speed fan controller; also compatible with all CLOUDLINE Series smart controllers.Mixed flow design combined with an EC-powered motor for a truly quiet and energy efficient performance.Duct Size: 4” | Dimensions: 6.9 x 11.9 x 7.4 in. | Airflow: 165 CFM | Noise: 29 dBA | Bearings: Dual Ball Product DescriptionThis inline fan system packs the CLOUDLINE’s core innovations and premium build quality together to bring you a value package. Designed to quietly cool grow tents, rooms, and closets, and provide ventilation in various air circulation and exhaust projects. Containing an inline mixed-flow design, the duct fan can maintain airflow even in high static pressure applications. The motor box containing the fan’s impeller and blades can be detached from the mounted frame for easy cleaning and maintenance. Complete kit includes one inline fan unit, one speed controller, UIS to 4-pin Molex dongle, installation manual, and all necessary mounting hardware. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment. Precise Speed ControllerThe speed controller enables you to set the duct fan’s speed to optimal noise and airflow levels for various environments. This inline fan is equipped with the CLOUDLINE Series’ same EC-motor that is precisely controlled using PWM (Pulse Width Modulation), which enables it to run smoothly at extremely low RPM speeds without generating motor noise. Ten speed options are available with power switch and backup memory. This model can be connected to the following smart controllers to share the same programming and power source as other EC-motor CLOUDLINE fans: B-Series Temperature ControllerT-Series Temperature and Humidity ControllerCONTROLLER 69CONTROLLER 67

Read more less

A next-gen fan designed for precise circulation control for plant growth, finer shop work, or tailored comfort. 10-speed wireless remote; smart digital PWM controls from silent, gentle breezes to high-velocity airflow.New innovative EC motor is quieter, more energy-efficient, and has twice the lifespan of AC floor/wall fans.IP-44 rated, heavy-duty build performs well in harsher environments with high humidity and temperatures.Floor standing or wall-mounted using included hardware with a 360-degree adjustable tilt to direct airflow. PRODUCT DESCRIPTIONA floor wall fan designed to provide precise control of an environment’s air circulation in applications like plant growing, finer shop work, or tailored personal comfort. Utilizes a cutting-edge EC motor with PWM control to access a full range of fan speeds from silent, ultra-gentle breezes to high-velocity airflow. Includes a 10-speed wireless remote with batteries included. The unit can be manually adjusted with a 360-degree tilt to direct airflow and features a heavy-duty IP-44 rated construction for harsher environments. Includes hardware for both floor standing and wall mounting and can be powered through a standard outlet with its 12-foot power plug cord. NEXT-GEN EC MOTORFeatures a cutting-edge Electronically Commutated (EC) motor with dual-ball bearings, controlled digitally using precise electronic pulses. This PWM technology enables the fan to operate quieter and control the full range of its speed 0 to 100% without additional heat or noise. In comparison, traditional floor wall fans contain AC-motors that rely on voltage suppression for limited speed control. EC motors pay for themselves in the long run having twice the lifespan and being 40% more energy-efficient. RATED FOR HARSH ENVIRONMENTSEach industrial fan system features heavy-duty construction with a steel enclosure, rigid stand, and weight-balanced aluminum blades and impellers that reduce vibrations. All components are specially sealed to be IP-44 rated to be highly resistant to liquids and dust. Put together, these upgrades enable greater performance in harsher environments with high humidity and varying temperatures.

Read more less