240V Temperature Device Station（DST-2）*Suited for Nz plugs (not pictured) The TrolMaster DST-2 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. Any heating or cooling device that is 10-amps @ 240 volts or less can be controlled by the DST-2.
LED status:* Blinking green FAST: If the LED is blinking quickly, that means the module has not been addressed to the controller OR that module does not have a good connection to the controller. *Pressing the small button on the module will address/link the module when first installed.* Blinking green SLOW: If you see a slowly blinking green LED, that means the module is addressed and connected to the controller, and the module is currently turned OFF.* SOLID green: If you see the LED is on solid (no blinking) that means the modules are addressed, connected and currently turned ON.* Blinking red: If you see the LED change to blinking red, that means the module has been overloaded. To reset the overload unplug the module from the power.
LED Power Indicator
RJ12 Cable Socket
Addressing
Plug & Play
An affordable meter that provides scientifically accurate Photosynthetic Active Radiation (PAR) light readings under any light source including LED!
PROVIDES ACCURATE PAR LIGHT READINGS FROM ANY LIGHT SOURCE:– Full sun to full shade indoors or outdoors.– Artificial light sources (LED, High Pressure Sodium, Metal Halide,Florescent, Halogen…).
THREE MODES OF OPERATION:– Instant Spot Measurement mode for PAR light readings.– Scan mode for quickly averaging PAR over an area.
COMPACT AND EASY TO USE.
WATER AND IMPACT RESISTANT.
INTEGRAL MOUNTING PLATE FOR: STAND, STAKE, LANYARD & HANGER HOLE, AND MAGNET MOUNTS.
1/4-20 THREADED HOLE FOR MOUNTING ON CAMERA TRIPODS AND STANDS.
INCLUDES A SENSOR COVER AND SOFT CARRYING CASE
The pH of a nutrient solution is critically important. Plants absorb minerals best between pH 5.5 and pH 6.5
HydroGarden pH Down is 81% phosphoric acid and needs to be handled with care. If you get it on yourself or your clothes, wash it off immediately.
pH adjustment should be the done last after nutrients and additives have been added to the tank. Recirculating systems may need the addition of pH Down every day since the pH of the nutrient solution tends to rise over time.
(81% Phosphoric acid)
Health and Safety
always wear gloves and eye protection
store in a locked cupboard
keep away from children
dilute with water before adding to the tank. Add acid to water, not the other way around.
safety data sheets are available.
Why Choose Our Clip-on Fan?
Strengthened Stems: Our Clip-on Fan mimics natural breezes, strengthening plant stems.Enhanced Protection: Protects against mold, bud rot, and mildew for healthier growth.Pest Resistance: Shields plants from fungus gnats and spider mites.Improved Growth Conditions: Controls heat and humidity for faster growth and better harvests.
Expert Tips:
Optimal Airflow: Achieve the desired airflow by positioning the Clip-on Fan to circulate air both above and beneath the plants’ main canopy. This promotes a pleasant breeze throughout the growing area.Moderate Wind Intensity: Avoid direct exposure of plants to a strong fan, as excessive wind can harm leaves and stems. Instead, consider pointing the fans towards the walls, allowing for gentle diffusion of the breeze.Ensuring Adequate Coverage: After placing the fans, carefully survey the entire grow area to verify that every part receives a gentle breeze. Adjust the fan positions as needed to eliminate stagnant air and ensure consistent airflow.
Spider Farmer® 5L Cool Mist Humidifier for PlantsIf you notice a low humidity level, it is crucial to take prompt action to improve it. An inadequate amount of moisture in the air can result in a slowdown in growth and reduced efficiency of photosynthesis.
Features
4 Adjustable Mist levelsConstant Humidity ControlCustomizable TimerAdjustable Extension DuctingPrecise Temperature and Humidity Sensors
What's Included?1 x 5L Spider Farmer Dehumidifier1 x Flexible Long Hose2 x Flexible Short Hose1 x 2 Way Nozzle
Spider Farmer 32 Pint Dehumidifier
Note These have and EU plug and will require travel adapter. 100 % fine to be used this way
While your grow tent requires a certain level of humidity, excessive humidity can cause serious problems for your plants.
If your grow room has too much moisture, you need a dehumidifier.
Key FeaturesSpecifically Designed for Grow Tents: Perfect fit for grow tent setups, optimizing space and efficiency.High Dehumidification Capacity: 39x more effective than semiconductor models, ensuring optimal humidity control.Energy Efficient: 4x higher energy efficiency ratio, reducing operating costs.Versatile Installation: Can be placed inside or outside the tent, with easy two-step setup.User-Friendly Controls: Features adjustable modes, humidity display, timers, speed control, and security lock.Winter-Ready: Compressor design ensures functionality even in colder temperatures.Easy Maintenance: Simple-to-clean filter and detachable air duct for hassle-free upkeep.Proper Probe & Duct Placement: Ensures accurate readings and effective airflow distribution.
What does a dehumidifier do?
When the air humidity exceeds the ideal range, a dehumidifier removes moisture from the air, reducing the humidity and ensuring your plants remain in an optimal environment. Excessive humidity can lead to bud rot and other molds, and can also slow plant growth.
Why recommend a compressor dehumidifier over a semiconductor dehumidifier?
Compressor dehumidifiers are much more effective than semiconductor dehumidifiers, with a dehumidifying capacity 39 times greater. You may have previously purchased a semiconductor dehumidifier only to find it almost ineffective. This is why we recommend compressor dehumidifiers: they quickly process large volumes of air, provide better dehumidification, and are highly efficient.
Spider Farmer® 16L Cool Mist Humidifier for PlantsElevate your cultivation with the 16L Humidifier – delivering efficiency, capacity, and precision for your large-scale planting needs.
Versatile Application:
Tailored for large tent cultivation and commercial plant projects.Ideal for creating the perfect growing environment in both extensive tent setups and commercial cultivation spaces.Impressive Capacity and Precision:
Expandable hose disperses mist to the corner of the tent for thorough coverage.Four adjustable mist levels with a maximum humidification capacity of 1400ML/H.Independent sensor for precise humidity control.Note: Ensure the humidity sensor is NOT placed near the mist outlet for accurate readings.
Spider Farmer® 16L Cool Mist Humidifier FeaturesEnhance the health and vitality of your indoor plants with the Spider Farmer® 16L Cool Mist Humidifier. Designed to create the perfect environment for your botanical friends, this advanced humidifier delivers a fine mist of moisture to help maintain optimal humidity levels.
Key Features:
Efficient Humidification: This humidifier features an extra-large 16-liter capacity water tank with a convenient tick mark window, allowing it to continuously provide a cool mist for all day humidificationCustomizable Humidity Controls: Set the humidity levels anywhere between 35% to 95% to create the perfect environment for your plants' growth and health.Timer Setting: Schedule the timer between 1 to 12 hours for convenient operation according to your specific needs.Adjustable Mist Output: Customize the mist intensity to suit different plant types and environmental conditions. Choose from four mist levels with a maximum output of 1400ml/hour.Easy Refilling and Cleaning: The top-fill design simplifies the refilling process, while the wide opening facilitates thorough cleaning, preventing the buildup of bacteria and mold for a hygienic environment.Automatic Shut-Off: Equipped with a built-in sensor, the humidifier automatically shuts off when the water level is low, providing peace of mind and preventing damage to the unit.Large Wheels, Easy to Move: With its sleek and modern design, the Spider Farmer® 16L Cool Mist Humidifier complements any indoor space, whether it's your living room, bedroom, or greenhouse.
Description
Overview
High-capacity moisture removal. Compact, efficient design.
The Quest 200 50Hz dehumidifier delivers the perfect balance of high-capacity moisture removal and exceptional energy efficiency, making it a smart solution for growers and facility operators needing dependable moisture control in moderate-sized environments. Built for 50Hz regions, this unit excels where space, performance, and energy use must align.
Powered by Quest’s proprietary M‑CoRR Technology, the Quest 200 50Hz dehumidifier delivers superior efficiency, pulling 3.9 L/kWh. Its high efficiency and reduced heat output contribute to operational cost savings. Quality-built with a compact footprint, the Quest 200 is easy to integrate without compromising valuable space or environmental stability.
With this next generation of product, Quest has eliminated the need for a separate hang kit, making installation simpler than ever. Simply insert threaded rod into the built-in lift and hang points for easy installation.
A robust digital control system enables fine-tuned RH setpoints, preventative maintenance notifications, diagnostic feedback, and a dark mode setting to support low-light environments.
Engineered and assembled in the USA, the Quest 200 50Hz is a reliable, space-conscious, high-performance solution for facilities looking to maximize environmental control and operations.
Technical Specifications
Specification
Value
@ 26.7 °C | 60% RH
Water Removal
90 Liters/Day
Efficiency
8.3 Pints/kWh
Energy Factor
3.9 Liters/kWh
Current Draw
4.2 Amps
Power
1,220 Watts
BTU (Total)
11,900
BTU (Heat of Condensation)
8,600
BTU (Motor Load)
3,300
@ 23.9 °C | 50% RH
Water Removal
57.7 Liters/Day
Efficiency
5.8 Pints/kWh
Energy Factor
2.7 Liters/kWh
Current Draw
3.8 Amps
General Specifications
Part Number
4046100-NC
Dehumidifier Type
Refrigerant Dehumidifier
CFM
500
Operating Temperature
13 °C Min–35 °C Max
Supply Voltage
230 V
Unit Dimensions
68cm (L) × 60cm (W) × 53cm (H)
Unit Weight
58.9 kg
Control Type
Onboard digital controls with low voltage terminal block
Air Filter MERV Rating
MERV 13
Air Filter Dimensions
45.7 × 45.7 × 5.1 cm
Recommended Breaker Size (UK)
13 Amp
Recommended Breaker Size (EU, AU, ZA)
10 Amp
Power Cord
3m FEM IEC 60320-C13
Refrigerant Type
R454B
Refrigerant Amount
1,446 g (51 oz)
Drain Port Connection
1.9cm Threaded NPT
Fans
Single Speed Impeller
Description
Grow room monitoring. Anytime. Anywhere.
Improve your grow with remote monitoring of temperature, RH, light, and VPD, custom alert, and integrated journaling.
Monitor your garden’s conditions from anywhere. Set alerts that notify you when something goes wrong.
Increase yields and reduce waste. Understand the impacts your actions have on your grow room’s environment.
Temperature – Your plants need consistent temperature for maximum yields.
Humidity – Ideal RH promotes the absorption of nutrients and plant health.
VPD – Maintain the correct VPD for optimal nutrient uptake.
Light – Ensure that your daylight hours match your stage of growth.
Dew Point – Dew point is the key to avoiding condensation and preventing mould.
Connectivity Issues
Power Outages
40W Ozone Generator, 1000mg Per Hour
Ozone is a naturally occurring molecule to remove odours and pathogens from the air. Eliminate those unwanted smells, freshen the air and also kill air-borne pathogens.Used in the outlet ducting it will mix and destroy odour. Used in the grow room itself it will help prevent fungus issues and botyritis (over exposure to plants can be more harmful to plants!)
Can be used to remove odour from room or cars (plant material, dog smell, mould from leaks)
Avoid the area when Ozone is being produced. It has a distinctive smell almost electrical in smell. Too much exposure can damage humans, pets, and even plants. Always evacuate the area, and ventilate until the Ozone has dissipated. Ozone is unstable and will become oxygen again given time. In extreme situations, high levels of Ozone can damage rubber and plastic. Please do not use this unit in a 24/7 situation. Like any tool, it shouldn't be misused. Regular smaller concentrations usually do a better job than large concentrations.
Main Features
Wifi control: INKBIRD IHC-200-WIFI can be connected to our mobile phones via its free APP and we can monitor, set and/or adjust the humidity on our mobile phones at any time, no time to be wasted for making frequent checking, more efficient, and convenient. (WiFi supported: ONLY SUPPORTS 2.4GHz Wi-Fi (Support IEEE 802.11b/g/n)
Switch modes automatically: INKBIRD IHC-200-WIFI supports humidification and dehumidification modes and switches between the two modes automatically, easy and convenient for humidity controlling and monitoring.
Alarms for safer: the alarm of INKBIRD IHC-200-WIFI will be triggered once the detected humidity exceeds the set values or its limit value or once the sensor occurs faulty performance and the alarm can be turned off by pressing any physical button of the device or can be turned off on our mobile phones. It will be much safer and more efficient for application contexts.Range and accuracy: its humidity measuring range is 10 ~ 99% with its relative humidity accuracy of ± 3% RH ~ ± 5% RH.
Humidity calibration: INKBIRD IHC-200-WIFI supports humidity calibration for more accurate measurement and control based on our practical application contexts.
Delay protection: it is equipped with delay protection for its control output which can offer more protection for the device and the monitored objects as well.
Evaporative Coolers to help New Zealand farmers combat extreme climates. Ready to reduce your dangerously high temperatures and increase humidity to healthy cultivation levels.
Hook up to any fan, to blow cool, wet air into your grow room!
300mm Flange
Easy installationKit Includes: Water Pump, ball float, reservoir, cooler unit. Great for summer high temperatures! Also helps raise humidity
Here is a great controller for these - https://www.hydrogarden.co.nz/shop/New-Products/Cultiv8-Heating-controller/
The Breezin Hot Rod Heat Bars - Suited for grow tents or glass houses
Are by far the safest and most energy efficient option for those looking to maintain optimal greenhouse/grow room temperatures during our long, cold & unforgiving winters.
The user friendliness and versatility will enable growers to easily hang or mount the heat bars to the walls, floor or even ceiling of their grow/propagation area.
80 wattsHeating area - Upto 1.2M x 1.2M (Can raise temperature by upto 7 degrees)Length 60cmWaterproof Lever IP55 (suitable for humid environment)Works well with any Compatible ThermostatUser Friendly, Energy efficientDurable Steel Shell with Enamel Finish1 Year Warranty PRACTICAL USES INCLUDE:
Propagation tentsLarge Grow tentsGreenhouses/GrowroomsAdditional heat during lights on or lights off ADDITIONAL INFORMATIONThe Heat Bars are compatible with any digital or analogue thermostat (recommended).The IP55 water resistant rating ensures safe use in humid environments and the durable enamel finish ensures fire-safety. They are constructed with a heating element inside an alloy metal tube with a quality enamel finish.Includes mounting bracket for easy installation.Comes with 1 year warranty.
Designed with smart controls and precision vapors to obtain optimal humidity levels for plant growth.Next-gen EC ultrasonic vaporizer can reach up to 10 levels of humidity for fine-tuned moisture control.Interchangeable nozzle heads included for flexible moisture distribution in one direction or a wide area.Features smart humidity and timer programming, hideable backlit display, and auto-start with backup memory.Connects to UIS controllers for dynamic climate triggers, grow cycles, scheduling, alerts, and app control.
A next-gen humidifier designed with smart controls and precision vapors to obtain the optimal humidity levels for plant growth. Contains an innovative EC ultrasonic vaporizer that utilizes digital pulses to reach up to 10 levels of moisture output. This will allow you to finely tune your control of moisture levels in your grow space. The onboard controller features smart humidity and timer programming, which is supported by a corded precision humidity sensor. Its digital display provides active humidity readings and can be toggled to be hidden. Also features a built-in automatic shutoff that protects the system when the water reservoir is depleted. Includes a 15L water tank, piping, and interchangeable nozzles that distribute moisture in one direction or a wide area. This product is part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment.
SMART HUMIDITY CONTROLThis environmental humidifier features an onboard controller that is equipped with smart humidity and timer programming. Digitally set four levels of moisture output which can be increased to 10 levels with a UIS controller. The included corded sensor probe provides quick readings to ensure swift responses to any changes in climate. Connect to UIS controllers to integrate with other grow equipment and access dynamic climate triggers, grow cycles, and schedules. Connect to the app to control your devices from anywhere, as well as unlock advance automations, alerts, climate charts, CSV data export, and more!
Dial in you environment with the Humidifier and controller combo!
Humidifier
23L
Manual fill or use the pipe with float valve to connect to water.Power: 110WMist: 1200ml/hour
Controller
Humidity Controller IHC-200 INKBIRD IHC-200 is an out-of-box humidity controller, which can control those humidifiers, dehumidifiers and/or fans which voltages range from 100 to 265. It is widely used for mushroom, mini greenhouse, ventilator fan, crawl space, turtle enclosure, curing chamber, snake cage, tobacco cage and etc.
Switch modes automatically: INKBIRD IHC-200 supports humidification and dehumidification modes and switches between the two modes automatically, easy and convenient for humidity controlling and monitoring.
Alarms for safer: the alarm of INKBIRD IHC-200 will be triggered once the detected humidity exceeds the set values or its limit value or once the sensor occurs faulty performance. It will be much safer and more efficient for application contexts.
Range and accuracy: its humidity measuring range is 5~99.99%RH with its control range of 5~99%RH and its accuracy of ±3%RH.
Humidity calibration: INKBIRD IHC-200 supports humidity calibration for more accurate measurement and controlling based on our practical application contexts.
Delay protection: it is equipped with delay protection for its control output which can offer more protection for the device and the monitored objects as well.
Humidity query: INKBIRD IHC-200 offers current humidity query and we can have real time humidity monitoring and controlling and do be better for our monitored objects.
