Great wee 100mm air circulation fans! Compact and Powerful.
Best for VGrow Smart Grow Box, Can be controlled by Vivosun App, Not compatible with GrowHub E42A/E25
3-Speed Settings: With one-touch operation that cycles through three speed presets up to 3500 RPM, this compact fan offers tailored cooling customization; And with the integrated memory feature, your chosen fan speed is automatically retained if power gets disrupted
Adjustable Airflow Angle: Simply loosen the front cover knob for free rotation, dispersing breezy circulation throughout the entire space; Or tighten the knob for a focused air channel to concentrated areas as needed; Seamless adjustments between wide-span and precision-point airflow satisfy your different needs
Flexible Hook: A detachable and angle-adjustable hook on the back of this mini DC electric fan allows for secure attachment to poles and adjustable positioning; By changing the hook’s angle, you can flexibly direct airflow in different directions
Versatile Mounting: This lightweight fan offers four mounting options for flexible placement; It can be positioned on flat surfaces, clamped to poles, suspended from ceilings, or magnetically secured to tent walls by positioning a separate iron plate (not included) on the corresponding exterior side
Whisper-Quiet Circulation: Operating at a maximum noise level of 35 dBA, this fan ensures a tranquil environment; Effortlessly install it in your grow tent to foster a zone of effective air circulation, maintaining the ideal temperature and humidity for your plants to flourish
Powerful 1000W heater with smart AI control and a multi-configuration design to optimize the climate for all plant growth stages.Temperature and VPD programming powered by adaptive AI that dynamically adjusts output to maintain your target environment.Utilizes individual PTC plates with PWM control to deliver 10 true heat levels or intake fresh air for balanced climate control.Dual ports enable you to duct directly into your grow space or create a closed-loop setup for optimal heating efficiency (ducting not included).Connects with UIS controllers for WiFi app connectivity—unlocking advanced automations, data tracking, alerts, and grow guides
Intelligent Climate Control for Every Growth StageExperience precision-engineered climate management with this powerful 1000W AI-driven heater. Designed to optimize growth through every stage, it automatically adjusts temperature, airflow, and VPD to maintain your target environment. Individual PTC plates with PWM control deliver 10 true heat levels or fresh air intake for balanced conditions, while dual duct ports support both open- and closed-loop setups for versatile integration. This product is ETL-certified with safety features including tip-over alarms, flame-retardant materials, and overheat protection with auto-restart it delivers performance you can trust. Designed exclusively for indoor use. Operate only in controlled environments with humidity between 30%–65% RH, including incoming airflow. Do not use outdoors or in high-humidity areas. Do not use with humidifiers in closed-loop setups. Mist may enter intake ducting and damage the heater. Plug heaters only into a grounded wall outlet with surge protection. Never use extension cords or power strips, as this may cause overheating or melting. Do not share the outlet with other devices.
Adaptive AI for Predictive Climate ManagementPowered by adaptive AI, the system continuously learns from your environment to maintain precise temperature and VPD targets. Its intelligent algorithm dynamically adjusts output to match your programmed ranges, responding instantly to environmental fluctuations, throttling in precise percentages to deliver unmatched accuracy and control. When connected through UIS controllers, growers can access real-time data tracking, alerts, and advanced automation to maintain the perfect climate 24/7
RJ12 to 3.5 Jack Extension Cable Set（ECS-2） The ECS-2 Extension Cable Set is designed to connect Hydro-X to most LED drivers with a pigtail wiring. The ECS-2 comes with a 16 ft RJ12 cable, a Y-splitter and a special 4 ft RJ12 / 3.5mm jack cable. The special cable connects to your lighting fixture / LED driver using the two-screw terminal block to connect to loose wires on the LED driver. Simply connect the two wires from your LED driver to the terminal block, each of the lights being controlled are wired in a “daisy-chain” configuration back to the Hydro-X LMA adapter.
TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.
This LMA-14 lighting adapter is specially designed for the lights with 0-10V protocol control
HIDs: Gavita/Nanolux/Luxx/Growers Choice/Illuminar/PL
LEDs: Fluence/Next light/Photobio
NOTE: Each LMA-14 can control up to 40 HID lights or 24 LEDs. Additional LMA-14 adapters can be used with the SPH-1 to control as many lights as required.
*When using with Fluence Spyder 2x/2i fixtures @ 277v, no more than 12 LEDs per LMA-14
240V Humidity Device Station（DSH-2）(To fit NZ plugs, Not pictured) The TrolMaster DSH-2 Humidity control / device modules (240V) allow the user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-x. The DSH modules are rated @ 10-amps. *Use with dehumidifiers less than 7 amps to avoid current overload.
LED status:* Blinking green FAST: If the LED is blinking quickly, that means the module has not been addressed to the controller OR that module does not have a good connection to the controller. *Pressing the small button on the module will address/link the module when first installed.* Blinking green SLOW: If you see a slowly blinking green LED, that means the module is addressed and connected to the controller, and the module is currently turned OFF.* SOLID green: If you see the LED is on solid (no blinking) that means the modules are addressed, connected and currently turned ON.* Blinking red: If you see the LED change to blinking red, that means the module has been overloaded. To reset the overload unplug the module from the power.
TrolMaster Grow Camera（TC-1） The TrolMaster Grow Camera (TC-1) is a high-quality surveillance camera specifically designed for grow rooms, providing 24-7 live video monitoring of your grow area. It is specifically designed to work with any of the TrolMaster HCS controllers by "linking" the camera to a HCS controller that is also connected to the app. The TC-1’s built-in night vision has been engineered to use invisible (plant safe) IR illuminators to prevent disrupting the morphology of the plant during the dark period. TC-1 features night vision with the ability to see up to 35ft by using ultra-low infrared emissions that are safe for plants during the day and night. TC-1 also utilizes TrolMaster’s free phone app called TM+ / TM+ Pro. Using the TC-1 and the TM+ / TM+ Pro app provides 3 megapixels of low-latency internet live footage. A built-in MicroSD card slot is also available for video recording.
Hydro-X Environment Control System （HCS-1）
The Hydro-X system is a professional-grade single zone environmental system. It is fully customizable and modularly designed. Installation is simple and the system is easy to expand upon. The Hydro-X system can control most grow lights brands, HVAC systems, mini-split air conditioners, commercial dehumidifiers and humidifiers, as well as CO2 generators or regulators. With the free TrolMaster App, the user can access all of the settings and alerts on the system from anywhere at anytime.
*The HCS-1 is the brain of the Hydro-X system. It comes with a 3-in-1 Temp/Humid/Photocell sensor.
*Internet Connection Note: TrolMaster's main controllers can be connected to the internet in order to use the available APP. Most internet services available including land-based and cellular internet are compatible. However, HughesNet / Viasat Satellite internet is NOT compatible with TrolMaster controllers at this time.
Data Record Note: The HCS-1 can record the data coming in from the sensors onto a CSV file. To use this feature, you must first insert a MicroSD card 32GB or less into the MicroSD slot on the bottom of the HCS-1 or NFS-1 controllers. Once the card is inserted, the unit will automatically store data so it can be viewed later.
CO2 Sensor for Hydro-X only（MBS-S8） The optional CO2 Sensor (MBS-S8) measures the CO2 PPM within the growing area. Using the MBS-S8 allows the users to connect and control their supplemental CO2 system using the Hydro-X. *Used in combination with one or more DSC-1 CO2 device modules.
"Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"
TROLMASTER - HYDRO X CO2 CONTROL STATION
The TrolMaster DSC-2 CO2 control / device module allows user to easily connect and control standard supplemental CO2 devices or CO2 exhaust controls to the Hydro-x. Any CO2 device that is 10-amps @ 240 volts or less can be controlled by the DSC-2
SPECIFICATIONS:
Input Voltage: 100~240 VAC, 50/60Hz
LED status:* Blinking green FAST: If the LED is blinking quickly, that means the module has not been addressed to the controller OR that module does not have a good connection to the controller. *Pressing the small button on the module will address/link the module when first installed.* Blinking green SLOW: If you see a slowly blinking green LED, that means the module is addressed and connected to the controller, and the module is currently turned OFF.* SOLID green: If you see the LED is on solid (no blinking) that means the modules are addressed, connected and currently turned ON.* Blinking red: If you see the LED change to blinking red, that means the module has been overloaded. To reset the overload unplug the module from the power.
AC Remote Station （ARS-1）
The ARS-1 mini-split air conditioner controller is a unique product that solves the age-old problem of having separate day and night temperature settings on your mini-split air conditioners. The ARS-1 is a universal controller that works with most mini-split air conditioners (and some window-type AC units too), as long as the unit came with an IR / infrared remote controller. We use the remote control that came with the unit to “teach” those IR signals to the ARS-1 module. Once the ARS-1 “learns” those remote control codes, the ARS-1 will send those same signals to the indoor mini-split head unit changing the setpoint to the desired Day or Night temperature setting automatically base on the photocell sensor status.
*Note: The ARS-1 is currently not compatible with the following brands of devices: Daiken, Mr. Cool, Innovair, Denali Aire, Cooper and Hunter.
*Firmware Update Note: To update firmware on the TrolMaster's controllers and modules, you must use a Micro SD card that is 32GB or less capacity.
Package Content
1 x AC Remote Station (ARS-1)
1 x Signal Emitter
1 x 16ft RJ12 Cable
1 x 4ft RJ12 Cable
1 x RJ12 T-Splitter
Horticultural Lighting Controller
Treegers Growcast is a next generation lighting controller. Exclusively designed by Telos, the Treegers Growcast can control up to 50 grow lights. Wih the Telos app, users can set on/off times, sunrise/sunset and PPFD levels with ease.
Healthy PlantsOn/Off, Sunrise and Sunset,precise PPFD dimming
Peace of MindSecure Bluetooth connection (no wifi needed)
Fast InstallPlug and Play,Compatible with Many Grow Lights from Major Manufacturers
Reduce Your CostsOne Growcast controls up to 50 Lights
Product Code: TGC0001
Connection Interface: LLT Connector + RJ11 and linking adaptors
User Interface: Smart-phone app or manual control via touch sensor
Dimming Range: 10-100% & Dim to off
Dimming Protocol: 1-10v or PWM
Input Power: USB-C cable or 12v supply (From LED driver)
Wireless Technology: Bluetooth Mesh version 5.3
Control App: Telos Mesh
App Availability: Android and iOS
Ingress Protection: IP66
Dimensions: 32 x 32 x 22mm
Weight: 80g
Cable Length: 250mm
Warranty: 2 years
No need to reset your Timer from 18hrs to 12hrs, just push one button to switch over.
The ultimate in simplicity for grow room control! Time-Tastic Grow and Bloom single button timer allows you to easily switch between vegetative (grow / 18hrs ) and oral (bloom / 12hrs) with one easy button!
Reliability, simplicity and powerful – The Time-Tastic Push and Grow Timer is capable of managing up to 2400W with a monster 30AMP breaker!
• 30Amp Breaker• Single button operation and setting• Dual mode cycle – Grow (18hrs) & Bloom (12hrs).• Weather resistant• Easily mountable.
Use with:•Hydroponic lighting.• Heaters.• Fans.• Dehumidifiers.• Pumps.• And many more electrical devices.
The Timer-R digital timer has a large easy to read screen, a grow room friendly green back lit screen and an easy to use cross button for programming. This is just scratching the surface as the Time-R has many features never before seen on a timer…. until now.
The Time-R operates like a normal timer but has a multitude of other options for controlled switching that go down to one second intervals if needed. If you want to run a fan/pump with different settings at night, or you want to dispense CO2 using precise dosing at particular times throughout the day, the Time-R has you covered.
3 MODES
Timed Mode:Set precise on and off times, up to 15 times a day
Repeat Mode:Turn your equipment on and off, repeating at regular set intervals, min. from 1 sec and up to 99 hrs
Combined Mode:Using this mode allows you to run your equipment on and off repeatedly at set intervals throughout a 24-hour period. Maximum 3 group settings
Safe and reliable in Hydroponic nutrient systems - Simple adjustment & easy to read temperature indicator - Compact design - Submersible - Includes suction cups and clips Tank size - up to 300L Heater Power - 300W Heater Size - 35.5cm
Safe and reliable in Hydroponic systems - Simple adjustment & easy to read temperature indicator - Compact design - Submersible - Includes suction cups and clips Tank size - up to 200L Heater Power - 200W Heater Size - 30cm
Safe and reliable in hydroponic systems - Simple adjustment & easy to read temperature indicator - Compact design - Submersible - Includes suction cups and clips Tank size - up to 150L Heater Power - 150W Heater Size - 24.5cm
Vivosun AeroDrain D12 Intelligent Environmental DehumidifierSmart Humidity Control for Precision GrowingMaintain ideal conditions in your grow tent with the Vivosun AeroDrain D12 — a compact, intelligent dehumidifier designed to optimise plant health and environmental stability. Built for grow tents up to 1.5 × 1.5 meters (5×5), this unit integrates seamlessly with the Vivosun Smart Grow System, offering remote monitoring and automated adjustments via the Vivosun mobile app.
Effortless Setup & MobilityThe AeroDrain D12 features tool-free installation, with integrated handles and caster wheels for easy placement. Its compact footprint — just 27.5 × 18.5 × 48.2 cm — makes it ideal for tight grow spaces.
High-Efficiency Moisture RemovalPowered by a high-performance compressor, the D12 extracts up to 12 liters of moisture per day, with real-time monitoring of temperature, humidity, and vapor pressure deficit (VPD). It automatically adjusts operation to maintain optimal growing conditions.
Smart App IntegrationTrack and control your environment from anywhere using the Vivosun app. View live data, adjust settings, and receive alerts — all from your phone.
Reliable Operation & Safety Features2-liter water tank with dual drainage optionsAuto shutoff when tank is fullAutomatic restart after power outagesEnergy-efficient at just 120 wattsPerformance by EnvironmentTechnical SpecificationsDimensions: 27.5 × 18.5 × 48.2 cmWeight: 9 kgWater Tank Capacity: 2 LPower Supply: 120 V, 60 Hz / 200–240 V, 50 HzRated Power Consumption: 120 WRefrigerant: R290Operating Range: 5–35°C, 10–99% RH
Ultrasonic humidifier with 4.5 litre volume
Please note, there is a light on this unit that is on while the unit is running. The will tamper with your lights off cycle
This type of humidifier atomises the water with ultrasound. This is a quiet and very effective method of maintaining humidity in your growing space. With the relatively large water reservoir of 4.5 litres, you can easily last for a few days, depending on the set desired humidity.
Details
Upto 64 hours of operating time with full tankWater tank of 4.5 litresIncreases the relative humidity in the grow roomAccelerates the growth rate of cuttings, seedlings and vegetive plants
240V Temperature Device Station（DST-2）*Suited for Nz plugs (not pictured) The TrolMaster DST-2 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. Any heating or cooling device that is 10-amps @ 240 volts or less can be controlled by the DST-2.
LED status:* Blinking green FAST: If the LED is blinking quickly, that means the module has not been addressed to the controller OR that module does not have a good connection to the controller. *Pressing the small button on the module will address/link the module when first installed.* Blinking green SLOW: If you see a slowly blinking green LED, that means the module is addressed and connected to the controller, and the module is currently turned OFF.* SOLID green: If you see the LED is on solid (no blinking) that means the modules are addressed, connected and currently turned ON.* Blinking red: If you see the LED change to blinking red, that means the module has been overloaded. To reset the overload unplug the module from the power.
LED Power Indicator
RJ12 Cable Socket
Addressing
Plug & Play
The BETA-8 CO2 controller offers a precision CO2 NDIR sensor / controller in an affordable easy-to-use package. The BETA-8 features a high-quality remote CO2 sensor (with 16ft cable) and built-in photocell to automatically activate your supplemental CO2 system to maintain CO2 PPM levels only during daylight hours. The BETA-8 also has adjustable deadband and min-max recall. It also has a ‘fuzzy-logic’ feature which will more accurately control compressed CO2 systems.The CO2 sensor can be easily re-calibrated and will continue to operate accurately for many years.
For use with Co2 generators or compressed Co2
An affordable meter that provides scientifically accurate Photosynthetic Active Radiation (PAR) light readings under any light source including LED!
PROVIDES ACCURATE PAR LIGHT READINGS FROM ANY LIGHT SOURCE:– Full sun to full shade indoors or outdoors.– Artificial light sources (LED, High Pressure Sodium, Metal Halide,Florescent, Halogen…).
THREE MODES OF OPERATION:– Instant Spot Measurement mode for PAR light readings.– Scan mode for quickly averaging PAR over an area.
COMPACT AND EASY TO USE.
WATER AND IMPACT RESISTANT.
INTEGRAL MOUNTING PLATE FOR: STAND, STAKE, LANYARD & HANGER HOLE, AND MAGNET MOUNTS.
1/4-20 THREADED HOLE FOR MOUNTING ON CAMERA TRIPODS AND STANDS.
INCLUDES A SENSOR COVER AND SOFT CARRYING CASE
The pH of a nutrient solution is critically important. Plants absorb minerals best between pH 5.5 and pH 6.5
HydroGarden pH Down is very strong, potassium hydroxide at 300g/L and needs to be handled with care. If you get it on yourself or your clothes, wash it off immediately.
pH adjustment should be the done last after nutrients and additives have been added to the tank. Recirculating systems may need the addition of pH Down every day since the pH of the nutrient solution tends to rise over time.
(Potassium Hydroxide 300g/L)
Health and Safety
always wear gloves and eye protectionstore in a locked cupboardkeep away from children
The pH of a nutrient solution is critically important. Plants absorb minerals best between pH 5.5 and pH 6.5
HydroGarden pH Down is very strong, potassium hydroxide at 300g/L and needs to be handled with care. If you get it on yourself or your clothes, wash it off immediately.
pH adjustment should be the done last after nutrients and additives have been added to the tank. Recirculating systems may need the addition of pH Down every day since the pH of the nutrient solution tends to rise over time.
(Potassium Hydroxide 300g/L)
Health and Safety
always wear gloves and eye protectionstore in a locked cupboardkeep away from children
The pH of a nutrient solution is critically important. Plants absorb minerals best between pH 5.5 and pH 6.5
HydroGarden pH Down is very strong, potassium hydroxide at 300g/L and needs to be handled with care. If you get it on yourself or your clothes, wash it off immediately.
pH adjustment should be the done last after nutrients and additives have been added to the tank. Recirculating systems may need the addition of pH Down every day since the pH of the nutrient solution tends to rise over time.
(Potassium Hydroxide 300g/L)
Health and Safety
always wear gloves and eye protectionstore in a locked cupboardkeep away from children
The pH of a nutrient solution is critically important. Plants absorb minerals best between pH 5.5 and pH 6.5
HydroGarden pH Down is 81% phosphoric acid and needs to be handled with care. If you get it on yourself or your clothes, wash it off immediately.
pH adjustment should be the done last after nutrients and additives have been added to the tank. Recirculating systems may need the addition of pH Down every day since the pH of the nutrient solution tends to rise over time.
(81% Phosphoric acid)
Health and Safety
always wear gloves and eye protection
store in a locked cupboard
keep away from children
dilute with water before adding to the tank. Add acid to water, not the other way around.
safety data sheets are available.
The pH of a nutrient solution is critically important. Plants absorb minerals best between pH 5.5 and pH 6.5
HydroGarden pH Down is 81% phosphoric acid and needs to be handled with care. If you get it on yourself or your clothes, wash it off immediately.
pH adjustment should be the done last after nutrients and additives have been added to the tank. Recirculating systems may need the addition of pH Down every day since the pH of the nutrient solution tends to rise over time.
(81% Phosphoric acid)
Health and Safety
always wear gloves and eye protectionstore in a locked cupboardkeep away from childrendilute with water before adding to the tank. Add acid to water, not the other way around.safety data sheets are available.
The pH of a nutrient solution is critically important. Plants absorb minerals best between pH 5.5 and pH 6.5
HydroGarden pH Down is 81% phosphoric acid and needs to be handled with care. If you get it on yourself or your clothes, wash it off immediately.
pH adjustment should be the done last after nutrients and additives have been added to the tank. Recirculating systems may need the addition of pH Down every day since the pH of the nutrient solution tends to rise over time.
(81% Phosphoric acid)
Health and Safety
always wear gloves and eye protectionstore in a locked cupboardkeep away from childrendilute with water before adding to the tank. Add acid to water, not the other way around.safety data sheets are available.
Why Choose Our Clip-on Fan?
Strengthened Stems: Our Clip-on Fan mimics natural breezes, strengthening plant stems.Enhanced Protection: Protects against mold, bud rot, and mildew for healthier growth.Pest Resistance: Shields plants from fungus gnats and spider mites.Improved Growth Conditions: Controls heat and humidity for faster growth and better harvests.
Expert Tips:
Optimal Airflow: Achieve the desired airflow by positioning the Clip-on Fan to circulate air both above and beneath the plants’ main canopy. This promotes a pleasant breeze throughout the growing area.Moderate Wind Intensity: Avoid direct exposure of plants to a strong fan, as excessive wind can harm leaves and stems. Instead, consider pointing the fans towards the walls, allowing for gentle diffusion of the breeze.Ensuring Adequate Coverage: After placing the fans, carefully survey the entire grow area to verify that every part receives a gentle breeze. Adjust the fan positions as needed to eliminate stagnant air and ensure consistent airflow.
Spider Farmer® 5L Cool Mist Humidifier for PlantsIf you notice a low humidity level, it is crucial to take prompt action to improve it. An inadequate amount of moisture in the air can result in a slowdown in growth and reduced efficiency of photosynthesis.
Features
4 Adjustable Mist levelsConstant Humidity ControlCustomizable TimerAdjustable Extension DuctingPrecise Temperature and Humidity Sensors
What's Included?1 x 5L Spider Farmer Dehumidifier1 x Flexible Long Hose2 x Flexible Short Hose1 x 2 Way Nozzle
Spider Farmer 32 Pint Dehumidifier
Note These have and EU plug and will require travel adapter. 100 % fine to be used this way
While your grow tent requires a certain level of humidity, excessive humidity can cause serious problems for your plants.
If your grow room has too much moisture, you need a dehumidifier.
Key FeaturesSpecifically Designed for Grow Tents: Perfect fit for grow tent setups, optimizing space and efficiency.High Dehumidification Capacity: 39x more effective than semiconductor models, ensuring optimal humidity control.Energy Efficient: 4x higher energy efficiency ratio, reducing operating costs.Versatile Installation: Can be placed inside or outside the tent, with easy two-step setup.User-Friendly Controls: Features adjustable modes, humidity display, timers, speed control, and security lock.Winter-Ready: Compressor design ensures functionality even in colder temperatures.Easy Maintenance: Simple-to-clean filter and detachable air duct for hassle-free upkeep.Proper Probe & Duct Placement: Ensures accurate readings and effective airflow distribution.
What does a dehumidifier do?
When the air humidity exceeds the ideal range, a dehumidifier removes moisture from the air, reducing the humidity and ensuring your plants remain in an optimal environment. Excessive humidity can lead to bud rot and other molds, and can also slow plant growth.
Why recommend a compressor dehumidifier over a semiconductor dehumidifier?
Compressor dehumidifiers are much more effective than semiconductor dehumidifiers, with a dehumidifying capacity 39 times greater. You may have previously purchased a semiconductor dehumidifier only to find it almost ineffective. This is why we recommend compressor dehumidifiers: they quickly process large volumes of air, provide better dehumidification, and are highly efficient.
Spider Farmer® 16L Cool Mist Humidifier for PlantsElevate your cultivation with the 16L Humidifier – delivering efficiency, capacity, and precision for your large-scale planting needs.
Versatile Application:
Tailored for large tent cultivation and commercial plant projects.Ideal for creating the perfect growing environment in both extensive tent setups and commercial cultivation spaces.Impressive Capacity and Precision:
Expandable hose disperses mist to the corner of the tent for thorough coverage.Four adjustable mist levels with a maximum humidification capacity of 1400ML/H.Independent sensor for precise humidity control.Note: Ensure the humidity sensor is NOT placed near the mist outlet for accurate readings.
Spider Farmer® 16L Cool Mist Humidifier FeaturesEnhance the health and vitality of your indoor plants with the Spider Farmer® 16L Cool Mist Humidifier. Designed to create the perfect environment for your botanical friends, this advanced humidifier delivers a fine mist of moisture to help maintain optimal humidity levels.
Key Features:
Efficient Humidification: This humidifier features an extra-large 16-liter capacity water tank with a convenient tick mark window, allowing it to continuously provide a cool mist for all day humidificationCustomizable Humidity Controls: Set the humidity levels anywhere between 35% to 95% to create the perfect environment for your plants' growth and health.Timer Setting: Schedule the timer between 1 to 12 hours for convenient operation according to your specific needs.Adjustable Mist Output: Customize the mist intensity to suit different plant types and environmental conditions. Choose from four mist levels with a maximum output of 1400ml/hour.Easy Refilling and Cleaning: The top-fill design simplifies the refilling process, while the wide opening facilitates thorough cleaning, preventing the buildup of bacteria and mold for a hygienic environment.Automatic Shut-Off: Equipped with a built-in sensor, the humidifier automatically shuts off when the water level is low, providing peace of mind and preventing damage to the unit.Large Wheels, Easy to Move: With its sleek and modern design, the Spider Farmer® 16L Cool Mist Humidifier complements any indoor space, whether it's your living room, bedroom, or greenhouse.
Description
Overview
High-capacity moisture removal. Compact, efficient design.
The Quest 200 50Hz dehumidifier delivers the perfect balance of high-capacity moisture removal and exceptional energy efficiency, making it a smart solution for growers and facility operators needing dependable moisture control in moderate-sized environments. Built for 50Hz regions, this unit excels where space, performance, and energy use must align.
Powered by Quest’s proprietary M‑CoRR Technology, the Quest 200 50Hz dehumidifier delivers superior efficiency, pulling 3.9 L/kWh. Its high efficiency and reduced heat output contribute to operational cost savings. Quality-built with a compact footprint, the Quest 200 is easy to integrate without compromising valuable space or environmental stability.
With this next generation of product, Quest has eliminated the need for a separate hang kit, making installation simpler than ever. Simply insert threaded rod into the built-in lift and hang points for easy installation.
A robust digital control system enables fine-tuned RH setpoints, preventative maintenance notifications, diagnostic feedback, and a dark mode setting to support low-light environments.
Engineered and assembled in the USA, the Quest 200 50Hz is a reliable, space-conscious, high-performance solution for facilities looking to maximize environmental control and operations.
Technical Specifications
Specification
Value
@ 26.7 °C | 60% RH
Water Removal
90 Liters/Day
Efficiency
8.3 Pints/kWh
Energy Factor
3.9 Liters/kWh
Current Draw
4.2 Amps
Power
1,220 Watts
BTU (Total)
11,900
BTU (Heat of Condensation)
8,600
BTU (Motor Load)
3,300
@ 23.9 °C | 50% RH
Water Removal
57.7 Liters/Day
Efficiency
5.8 Pints/kWh
Energy Factor
2.7 Liters/kWh
Current Draw
3.8 Amps
General Specifications
Part Number
4046100-NC
Dehumidifier Type
Refrigerant Dehumidifier
CFM
500
Operating Temperature
13 °C Min–35 °C Max
Supply Voltage
230 V
Unit Dimensions
68cm (L) × 60cm (W) × 53cm (H)
Unit Weight
58.9 kg
Control Type
Onboard digital controls with low voltage terminal block
Air Filter MERV Rating
MERV 13
Air Filter Dimensions
45.7 × 45.7 × 5.1 cm
Recommended Breaker Size (UK)
13 Amp
Recommended Breaker Size (EU, AU, ZA)
10 Amp
Power Cord
3m FEM IEC 60320-C13
Refrigerant Type
R454B
Refrigerant Amount
1,446 g (51 oz)
Drain Port Connection
1.9cm Threaded NPT
Fans
Single Speed Impeller
The ultimate grow room monitor. Pulse Pro is the big brother of the Pulse One, including all of the same features plus these additional sensors & hardware:CO2 data: Dual-channel NDIR, ±(50ppm + 3%MV)PPFD/PAR: Measures the total number of photons within the PAR region specific to plant growth (11 channels, 350nm to 1000nm)Spectrum & color analysis: Measures your light's color spectrum outputLight flicker frequency: Detect unwanted voltage changes and assess ballast & bulb healthLithium-ion rechargeable battery: Allows for wireless, handheld operation while taking PPFD measurements & ongoing data logging during power outages
Included features remotely accessible via the Pulse app (PC, iOS, Android):🌠Unlimited number of sensors & live data, including multiple locations & WiFi networks viewable on one dashboard📡 Instant, reliable alerts customizable to each zone📋 Easily adjust alert profiles on multiple devices with the template manager📊 Day & night averages for any selected time periodâš¡ Connectivity & power outage notificationsâ˜ï¸ VPD-LST offset calibration for accurate VPD data📓 Garden calendar & journal
Description
Grow room monitoring. Anytime. Anywhere.
Improve your grow with remote monitoring of temperature, RH, light, and VPD, custom alert, and integrated journaling.
Monitor your garden’s conditions from anywhere. Set alerts that notify you when something goes wrong.
Increase yields and reduce waste. Understand the impacts your actions have on your grow room’s environment.
Temperature – Your plants need consistent temperature for maximum yields.
Humidity – Ideal RH promotes the absorption of nutrients and plant health.
VPD – Maintain the correct VPD for optimal nutrient uptake.
Light – Ensure that your daylight hours match your stage of growth.
Dew Point – Dew point is the key to avoiding condensation and preventing mould.
Connectivity Issues
Power Outages
