Environment

Description Overview High-capacity moisture removal. Compact, efficient design. The Quest 200 50Hz dehumidifier delivers the perfect balance of high-capacity moisture removal and exceptional energy efficiency, making it a smart solution for growers and facility operators needing dependable moisture control in moderate-sized environments. Built for 50Hz regions, this unit excels where space, performance, and energy use must align. Powered by Quest’s proprietary M‑CoRR Technology, the Quest 200 50Hz dehumidifier delivers superior efficiency, pulling 3.9 L/kWh. Its high efficiency and reduced heat output contribute to operational cost savings. Quality-built with a compact footprint, the Quest 200 is easy to integrate without compromising valuable space or environmental stability. With this next generation of product, Quest has eliminated the need for a separate hang kit, making installation simpler than ever. Simply insert threaded rod into the built-in lift and hang points for easy installation. A robust digital control system enables fine-tuned RH setpoints, preventative maintenance notifications, diagnostic feedback, and a dark mode setting to support low-light environments. Engineered and assembled in the USA, the Quest 200 50Hz is a reliable, space-conscious, high-performance solution for facilities looking to maximize environmental control and operations. Technical Specifications Specification Value @ 26.7 °C | 60% RH Water Removal 90 Liters/Day Efficiency 8.3 Pints/kWh Energy Factor 3.9 Liters/kWh Current Draw 4.2 Amps Power 1,220 Watts BTU (Total) 11,900 BTU (Heat of Condensation) 8,600 BTU (Motor Load) 3,300 @ 23.9 °C | 50% RH Water Removal 57.7 Liters/Day Efficiency 5.8 Pints/kWh Energy Factor 2.7 Liters/kWh Current Draw 3.8 Amps General Specifications Part Number 4046100-NC Dehumidifier Type Refrigerant Dehumidifier CFM 500 Operating Temperature 13 °C Min–35 °C Max Supply Voltage 230 V Unit Dimensions 68cm (L) × 60cm (W) × 53cm (H) Unit Weight 58.9 kg Control Type Onboard digital controls with low voltage terminal block Air Filter MERV Rating MERV 13 Air Filter Dimensions 45.7 × 45.7 × 5.1 cm Recommended Breaker Size (UK) 13 Amp Recommended Breaker Size (EU, AU, ZA) 10 Amp Power Cord 3m FEM IEC 60320-C13 Refrigerant Type R454B Refrigerant Amount 1,446 g (51 oz) Drain Port Connection 1.9cm Threaded NPT Fans Single Speed Impeller

Read more less

AeroLush C08 Intelligent Air Conditioner, 4-in-1 Function, with Temperature & Humidity Sensor Probe, Designed for Growing Environments. Superior Climate Control: With an 8000 BTU compressor and precision Sensirion sensors, this air conditioner provides real-time temperature, humidity, and VPD monitoring, ensuring the ideal climate for your grow space 4-in-1 Versatility: Offers cooling, drying, heating, and fan modes, delivering complete climate control for optimal plant growth year-round Smart Control: Connects to the VIVOSUN app for remote monitoring and control, seamlessly integrating with the VIVOSUN Smart Grow System for automated synchronization with other devices Easy Setup & Mobility: No wall installation needed; portable design with built-in handles and caster wheels for flexible placement in any grow space Maintenance-Free Design: Features a self-evaporating system and auto-restart after power outages, ensuring hassle-free, continuous operation Recommended Compatibility: Recommended for grow tents up to 5x5 ft. Actual performance may vary depending on ambient temperature, humidity, and tent size. For best performance, keep the duct fan at level 0 or 1. Higher fan speeds may impact efficiency.

Read more less

Great wee 100mm air circulation fans! Compact and Powerful. Best for VGrow Smart Grow Box, Can be controlled by Vivosun App, Not compatible with GrowHub E42A/E25 3-Speed Settings: With one-touch operation that cycles through three speed presets up to 3500 RPM, this compact fan offers tailored cooling customization; And with the integrated memory feature, your chosen fan speed is automatically retained if power gets disrupted Adjustable Airflow Angle: Simply loosen the front cover knob for free rotation, dispersing breezy circulation throughout the entire space; Or tighten the knob for a focused air channel to concentrated areas as needed; Seamless adjustments between wide-span and precision-point airflow satisfy your different needs Flexible Hook: A detachable and angle-adjustable hook on the back of this mini DC electric fan allows for secure attachment to poles and adjustable positioning; By changing the hook’s angle, you can flexibly direct airflow in different directions Versatile Mounting: This lightweight fan offers four mounting options for flexible placement; It can be positioned on flat surfaces, clamped to poles, suspended from ceilings, or magnetically secured to tent walls by positioning a separate iron plate (not included) on the corresponding exterior side Whisper-Quiet Circulation: Operating at a maximum noise level of 35 dBA, this fan ensures a tranquil environment; Effortlessly install it in your grow tent to foster a zone of effective air circulation, maintaining the ideal temperature and humidity for your plants to flourish

Read more less

240V Temperature Device Station（DST-2）*Suited for Nz plugs (not pictured) The TrolMaster DST-2 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. Any heating or cooling device that is 10-amps @ 240 volts or less can be controlled by the DST-2.   LED status:* Blinking green FAST: If the LED is blinking quickly, that means the module has not been addressed to the controller OR that module does not have a good connection to the controller. *Pressing the small button on the module will address/link the module when first installed.* Blinking green SLOW: If you see a slowly blinking green LED, that means the module is addressed and connected to the controller, and the module is currently turned OFF.* SOLID green: If you see the LED is on solid (no blinking) that means the modules are addressed, connected and currently turned ON.* Blinking red: If you see the LED change to blinking red, that means the module has been overloaded. To reset the overload unplug the module from the power.   LED Power Indicator RJ12 Cable Socket Addressing Plug & Play 

Read more less

An affordable meter that provides scientifically accurate Photosynthetic Active Radiation (PAR) light readings under any light source including LED! PROVIDES ACCURATE PAR LIGHT READINGS FROM ANY LIGHT SOURCE:– Full sun to full shade indoors or outdoors.– Artificial light sources (LED, High Pressure Sodium, Metal Halide,Florescent, Halogen…). THREE MODES OF OPERATION:– Instant Spot Measurement mode for PAR light readings.– Scan mode for quickly averaging PAR over an area. COMPACT AND EASY TO USE. WATER AND IMPACT RESISTANT. INTEGRAL MOUNTING PLATE FOR: STAND, STAKE, LANYARD & HANGER HOLE, AND MAGNET MOUNTS. 1/4-20 THREADED HOLE FOR MOUNTING ON CAMERA TRIPODS AND STANDS. INCLUDES A SENSOR COVER AND SOFT CARRYING CASE

Read more less

The pH of a nutrient solution is critically important. Plants absorb minerals best between pH 5.5 and pH 6.5 HydroGarden pH Down is 81% phosphoric acid and needs to be handled with care. If you get it on yourself or your clothes, wash it off immediately. pH adjustment should be the done last after nutrients and additives have been added to the tank. Recirculating systems may need the addition of pH Down every day since the pH of the nutrient solution tends to rise over time.  (81% Phosphoric acid) Health and Safety always wear gloves and eye protection store in a locked cupboard keep away from children dilute with water before adding to the tank. Add acid to water, not the other way around. safety data sheets are available.

Read more less

Dial in you environment with the Humidifier and controller combo! Humidifier  23L Manual fill or use the pipe with float valve to connect to water.Power: 110WMist: 1200ml/hour Controller Humidity Controller IHC-200 INKBIRD IHC-200 is an out-of-box humidity controller, which can control those humidifiers, dehumidifiers and/or fans which voltages range from 100 to 265. It is widely used for mushroom, mini greenhouse, ventilator fan, crawl space, turtle enclosure, curing chamber, snake cage, tobacco cage and etc. Switch modes automatically: INKBIRD IHC-200 supports humidification and dehumidification modes and switches between the two modes automatically, easy and convenient for humidity controlling and monitoring. Alarms for safer: the alarm of INKBIRD IHC-200 will be triggered once the detected humidity exceeds the set values or its limit value or once the sensor occurs faulty performance. It will be much safer and more efficient for application contexts. Range and accuracy: its humidity measuring range is 5~99.99%RH with its control range of 5~99%RH and its accuracy of ±3%RH. Humidity calibration: INKBIRD IHC-200 supports humidity calibration for more accurate measurement and controlling based on our practical application contexts. Delay protection: it is equipped with delay protection for its control output which can offer more protection for the device and the monitored objects as well. Humidity query: INKBIRD IHC-200 offers current humidity query and we can have real time humidity monitoring and controlling and do be better for our monitored objects.

Read more less

Spider Farmer® 16L Cool Mist Humidifier for PlantsElevate your cultivation with the 16L Humidifier – delivering efficiency, capacity, and precision for your large-scale planting needs. Versatile Application: Tailored for large tent cultivation and commercial plant projects.Ideal for creating the perfect growing environment in both extensive tent setups and commercial cultivation spaces.Impressive Capacity and Precision: Expandable hose disperses mist to the corner of the tent for thorough coverage.Four adjustable mist levels with a maximum humidification capacity of 1400ML/H.Independent sensor for precise humidity control.Note: Ensure the humidity sensor is NOT placed near the mist outlet for accurate readings. Spider Farmer® 16L Cool Mist Humidifier FeaturesEnhance the health and vitality of your indoor plants with the Spider Farmer® 16L Cool Mist Humidifier. Designed to create the perfect environment for your botanical friends, this advanced humidifier delivers a fine mist of moisture to help maintain optimal humidity levels. Key Features: Efficient Humidification: This humidifier features an extra-large 16-liter capacity water tank with a convenient tick mark window, allowing it to continuously provide a cool mist for all day humidificationCustomizable Humidity Controls: Set the humidity levels anywhere between 35% to 95% to create the perfect environment for your plants' growth and health.Timer Setting: Schedule the timer between 1 to 12 hours for convenient operation according to your specific needs.Adjustable Mist Output: Customize the mist intensity to suit different plant types and environmental conditions. Choose from four mist levels with a maximum output of 1400ml/hour.Easy Refilling and Cleaning: The top-fill design simplifies the refilling process, while the wide opening facilitates thorough cleaning, preventing the buildup of bacteria and mold for a hygienic environment.Automatic Shut-Off: Equipped with a built-in sensor, the humidifier automatically shuts off when the water level is low, providing peace of mind and preventing damage to the unit.Large Wheels, Easy to Move: With its sleek and modern design, the Spider Farmer® 16L Cool Mist Humidifier complements any indoor space, whether it's your living room, bedroom, or greenhouse.

Read more less

Description Grow room monitoring. Anytime. Anywhere. Improve your grow with remote monitoring of temperature, RH, light, and VPD, custom alert, and integrated journaling. Monitor your garden’s conditions from anywhere. Set alerts that notify you when something goes wrong. Increase yields and reduce waste. Understand the impacts your actions have on your grow room’s environment.     Temperature – Your plants need consistent temperature for maximum yields. Humidity – Ideal RH promotes the absorption of nutrients and plant health. VPD – Maintain the correct VPD for optimal nutrient uptake. Light – Ensure that your daylight hours match your stage of growth. Dew Point – Dew point is the key to avoiding condensation and preventing mould. Connectivity Issues Power Outages

Read more less

40W Ozone Generator, 1000mg Per Hour Ozone is a naturally occurring molecule to remove odours and pathogens from the air. Eliminate those unwanted smells, freshen the air and also kill air-borne pathogens.Used in the outlet ducting it will mix and destroy odour. Used in the grow room itself it will help prevent fungus issues and botyritis (over exposure to plants can be more harmful to plants!) Can be used to remove odour from room or cars (plant material, dog smell, mould from leaks) Avoid the area when Ozone is being produced. It has a distinctive smell almost electrical in smell. Too much exposure can damage humans, pets, and even plants. Always evacuate the area, and ventilate until the Ozone has dissipated. Ozone is unstable and will become oxygen again given time. In extreme situations, high levels of Ozone can damage rubber and plastic. Please do not use this unit in a 24/7 situation. Like any tool, it shouldn't be misused. Regular smaller concentrations usually do a better job than large concentrations.

Read more less

 Main Features Wifi control: INKBIRD IHC-200-WIFI can be connected to our mobile phones via its free APP and we can monitor, set and/or adjust the humidity on our mobile phones at any time, no time to be wasted for making frequent checking, more efficient, and convenient. (WiFi supported: ONLY SUPPORTS 2.4GHz Wi-Fi (Support IEEE 802.11b/g/n) Switch modes automatically: INKBIRD IHC-200-WIFI supports humidification and dehumidification modes and switches between the two modes automatically, easy and convenient for humidity controlling and monitoring. Alarms for safer: the alarm of INKBIRD IHC-200-WIFI will be triggered once the detected humidity exceeds the set values or its limit value or once the sensor occurs faulty performance and the alarm can be turned off by pressing any physical button of the device or can be turned off on our mobile phones. It will be much safer and more efficient for application contexts.Range and accuracy: its humidity measuring range is 10 ~ 99% with its relative humidity accuracy of ± 3% RH ~ ± 5% RH. Humidity calibration: INKBIRD IHC-200-WIFI supports humidity calibration for more accurate measurement and control based on our practical application contexts. Delay protection: it is equipped with delay protection for its control output which can offer more protection for the device and the monitored objects as well.

Read more less

Evaporative Coolers to help New Zealand farmers combat extreme climates. Ready to reduce your dangerously high temperatures and increase humidity to healthy cultivation levels. Hook up to any fan, to blow cool, wet air into your grow room! 300mm Flange Easy installationKit Includes: Water Pump, ball float, reservoir, cooler unit. Great for summer high temperatures! Also helps raise humidity

Read more less

Here is a great controller for these - https://www.hydrogarden.co.nz/shop/New-Products/Cultiv8-Heating-controller/ The Breezin Hot Rod Heat Bars - Suited for grow tents or glass houses Are by far the safest and most energy efficient option for those looking to maintain optimal greenhouse/grow room temperatures during our long, cold & unforgiving winters.  The user friendliness and versatility will enable growers to easily hang or mount the heat bars to the walls, floor or even ceiling of their grow/propagation area. 80 wattsHeating area - Upto 1.2M x 1.2M (Can raise temperature by upto 7 degrees)Length 60cmWaterproof Lever IP55 (suitable for humid environment)Works well with any Compatible ThermostatUser Friendly, Energy efficientDurable Steel Shell with Enamel Finish1 Year Warranty PRACTICAL USES INCLUDE: Propagation tentsLarge Grow tentsGreenhouses/GrowroomsAdditional heat during lights on or lights off ADDITIONAL INFORMATIONThe Heat Bars are compatible with any digital or analogue thermostat (recommended).The IP55 water resistant rating ensures safe use in humid environments and the durable enamel finish ensures fire-safety. They are constructed with a heating element inside an alloy metal tube with a quality enamel finish.Includes mounting bracket for easy installation.Comes with 1 year warranty.

Read more less