Perfect set up for starting off clones or seedlings, You will need to also purchase you choice of growing medium (Rockwool, Jiffys, Easyplugs ect)
Includes
- Propagation dome (380 x 240 x 180 tall )
- 14 Watt heat pad
- 4 Small Punnets
- 20 pack of labels
Quick and simple to use delivering a consistnat temperature for your seed raising, cuttings and propagated plants. This heat pad is made from rigid material, supplying hard support. The heat pad measures 28cm square, is supplied ready to plug in and uses very little power of 10 watts. Great for plant propagation, seed raising, pet warmer or even a foot warmer.
Perlite is a light weight sterile potting media used in the horticulture industry. Use in propagation mixes, seed mixes and potting mixes will provide excellent aeration and drainage while still ensuring water retention. Perlite will help loosen up your soil preventing compaction making it easier for the roots of your plants to grow.
Sterile, Inert, pH neutral with very good water holding capacity.
Light weight
Sterile, Ph neutral
Excellent aeration and drainage
Eazy Plug
is an organic propagation plug specially formulated for optimum germination of seeds and rapid rooting of cuttings.
RHP Certified
Almost impossible to over-water
Easily re-hydrated if required
Easy to use plant starter cubes
Made from organic materials
Fully compostable & biodegradable
For all different types of cuttings and seeds
Amazingly fast and vigorous rooting
Perfect air to water ratio
Blended with a basic fertiliser for the first 2 to 3 weeks
Easy and safe plant transfer into rockwool, coco, perlite etc.
Eazy Plug 24-Cell
Easy to use
Organic
Fast and vigorous root development
Minimum failure rate
Suitable for all seeds and cuttings
Dried, so lightweight, clean and no risk of molds
Takes water back up amazingly fast
Compostable
A superior clone feed to ensure clones live longer and strike more roots!
Clone Start is a ready-to-use foliar spray that stimulates root growth and boosts immune system defenses. Clone Start contains a specialized carrier that delivers a clone-specific nutrient profile directly into the plants’ cells. This ensures your clone has everything needed to build a solid foundation of roots resulting in a better yield. Clone Start also increases resistance to pathogens and diseases that can harm your clone and slow down initial growth. We all know poor clones grow into poor plants so give your clones the extra boost they need to grow into high-quality, high-yielding plants. Clone Start works in conjunction with any type of clone gel or clone powder.
Directions
Shake well before use. Does not require dilution.
Spray: Spray directly onto leaves two to three times a week until clones are established.
Soak: Soak the clone medium (e.g. rockwool cube) in Clone Start prior to inserting clone.
Heat mat, or other heating controller
Temperature Calibration
Celsius or Fahrenheit read-out
4.3A max. current
1000 watt max. wattage
Temperature Range 20ºC to 42ºC
Here is a great controller for these - https://www.hydrogarden.co.nz/shop/New-Products/Cultiv8-Heating-controller/
Grow room heat bar.
Comes with NZ plug, Ready to start keeping your babies warm!
180W / 90CM
Small in size, big in value!
Great for heating 1.2 x 1.2 areas. Can raise temperatures by up to 6 degrees more!!
SlimLine and Safe
Here is a great controller for these - https://www.hydrogarden.co.nz/shop/New-Products/Cultiv8-Heating-controller/
The Breezin Hot Rod Heat Bars - Suited for grow tents or glass houses
Are by far the safest and most energy efficient option for those looking to maintain optimal greenhouse/grow room temperatures during our long, cold & unforgiving winters.
The user friendliness and versatility will enable growers to easily hang or mount the heat bars to the walls, floor or even ceiling of their grow/propagation area.
80 wattsHeating area - Upto 1.2M x 1.2M (Can raise temperature by upto 7 degrees)Length 60cmWaterproof Lever IP55 (suitable for humid environment)Works well with any Compatible ThermostatUser Friendly, Energy efficientDurable Steel Shell with Enamel Finish1 Year Warranty PRACTICAL USES INCLUDE:
Propagation tentsLarge Grow tentsGreenhouses/GrowroomsAdditional heat during lights on or lights off ADDITIONAL INFORMATIONThe Heat Bars are compatible with any digital or analogue thermostat (recommended).The IP55 water resistant rating ensures safe use in humid environments and the durable enamel finish ensures fire-safety. They are constructed with a heating element inside an alloy metal tube with a quality enamel finish.Includes mounting bracket for easy installation.Comes with 1 year warranty.
Growth Technologies best product for increasing clones performance in the rooting period. Reduces rooting times dramatically
Clonex® Clone Solution is a clone specific nutrient formulated using a special blend of minerals and vitamins.
Used with Clonex® Rooting Gel or any other rooting agent, it encourages rapid root development while helping to minimize stress. Clonex® Clone Solution is the result of extensive horticultural research and is designed to work together with Clonex Rooting Gel (above) or other rooting agents for outstanding results.
Clonex® Clone Solution contains specific micro nutrients and root enhancing agents, carefully formulated to initiate and nourish new root cells. Unlike competitive products, Clonex® Clone Solution is highly concentrated.
Directions for Use
For general use, dilute at a rate of 10ml (2 teaspoons) Clonex® Clone Solution per 1 liter (1 quart) of water or 2 1/2 tablespoons per gallon. After mixing, adjust pH to appropriate level (5.5 to 6.5). Soak rooting media. Allow for adequate drainage to avoid water logging. Continue with the above dilution rate throughout the entire propagation cycle. Moisten rooting media every second day or as needed.
Storage
Store in the original container in a cool, dry place, out of the reach of children. Do not store in direct sunlight or excessive heat.
Growth Technologies best product for increasing clones performance in the rooting period. Reduces rooting times dramatically
Clonex® Clone Solution is a clone specific nutrient formulated using a special blend of minerals and vitamins.
Used with Clonex® Rooting Gel or any other rooting agent, it encourages rapid root development while helping to minimize stress. Clonex® Clone Solution is the result of extensive horticultural research and is designed to work together with Clonex Rooting Gel (above) or other rooting agents for outstanding results.
Clonex® Clone Solution contains specific micro nutrients and root enhancing agents, carefully formulated to initiate and nourish new root cells. Unlike competitive products, Clonex® Clone Solution is highly concentrated.
CANNA Rhizotonic is a powerful, algae based, vegetable stimulator for roots of fast-growing plants that already have roots. Rhizotonic stimulates the further root development, increases the plant?s resistance to disease and promotes its inner and outer strength. Rhizotonic is 100% natural, and contains multiple vitamins. Rhizotonic influences the root environment and is the ideal supplement for the plant environment created by the grower. Rhizotonic has a calming effect on plants, and is ideally suited for use when shipping or re potting plants as well as to improving plants that are unhealthy or poorly developed. Rhizotonic can be used regardless of the type of medium. It is suitable for cultivation in potting soil and hydroculture. Rhizotonic is often sprayed on leaves and can be used as simple means for raising the pH level in fertilizer tanks.
CANNA Rhizotonic is a powerful, algae based, vegetable stimulator for roots of fast-growing plants that already have roots. Rhizotonic stimulates the further root development, increases the plant?s resistance to disease and promotes its inner and outer strength. Rhizotonic is 100% natural, and contains multiple vitamins. Rhizotonic influences the root environment and is the ideal supplement for the plant environment created by the grower. Rhizotonic has a calming effect on plants, and is ideally suited for use when shipping or re potting plants as well as to improving plants that are unhealthy or poorly developed. Rhizotonic can be used regardless of the type of medium. It is suitable for cultivation in potting soil and hydroculture. Rhizotonic is often sprayed on leaves and can be used as simple means for raising the pH level in fertilizer tanks
CANNA Rhizotonic is a powerful, algae based, vegetable stimulator for roots of fast-growing plants that already have roots. Rhizotonic stimulates the further root development, increases the plant?s resistance to disease and promotes its inner and outer strength. Rhizotonic is 100% natural, and contains multiple vitamins. Rhizotonic influences the root environment and is the ideal supplement for the plant environment created by the grower. Rhizotonic has a calming effect on plants, and is ideally suited for use when shipping or re potting plants as well as to improving plants that are unhealthy or poorly developed. Rhizotonic can be used regardless of the type of medium. It is suitable for cultivation in potting soil and hydroculture. Rhizotonic is often sprayed on leaves and can be used as simple means for raising the pH level in fertilizer tanks.
Aqua One air stones are ideal for aerating your aquarium providing vital oxygen for your fish and plants. This air stone is suitable for medium to high flow air pumps.
Features / Highlights– triangular profile with rounded narrow end, ie no sharp edges to hurt fish.– blue colour– 10cm
The Baldr Wireless Thermometer/Hygrometer means you can moniter your rooms temperature and humidity, from the comfort of your couch, bed or anywhere within 100M of your sensor
Indoor and outdoor temperature display thermometer
Indoor and outdoor humidity display hygrometer
Indoor temperature range: -9.9~+59.9 C; outdoor temperature range:-39.9~+69.9 C
Temperature accuracy +/-1.5 C under working temperature 0-50 C, resolution 0.1 C
Relative humidity range: 20%~95%, resolution 1%
Records max/min temperature and humidity (indoor and outdoor)
Comfort level indicator
Low battery indicator
Time display in 12 / 24 hour
White backlight will light for a few seconds after you press light button on top
Position Method: table standing or wall hanging
Main unit: powered by 3 x AAA batteries (not included)
Remote Sensor: powered by 2 x AAA batteries (not included)
Cover Only
Does not come with racking. This is made to fit standard size shelving of (1200x450x1800H) Shelving will be available to purchase soon
DescriptionAthena CULTURE LINE VPDome is the most efficient way to clone.
The easy-to-install fabric rack cover can hold 16 standard clone trays without the need for individual domes.Simple operation streamlines nursery workflow (2-4 hours labor savings per month per rack).Uniform and consistent VPD reduces mortality and speeds rooting.Durable construction reduces costly plastic dome replacements.Anti-microbial coating reduces disease vectors.
USAGE INSTRUCTIONSVPDome fits perfectly over a standard wire rack (48" W x 72" H x 18" D)Install bottom rack coverPlace cover over top of rackClose door with magnetic seals
Air Stone - 50mm Ball
Air Stones are an ideal accessory for added aeration, circulation and decorative highlights. It creates an awesome underwater effect while also breaking the water on the surface. Simply attach airline tubing and a check valve to the air stone and your air pump, position it in the desired location and enjoy.
To get maximum benefit from your air stone the bubbles should be small in size.
Air stones do get clogged up over time, so be sure to clean and replace them regularly to maximize the effect in your tank.
Key Benefits:
Provides circulation in the tank.
Increases the oxygen content.
Gives the fish bubbles to swim through
Domed plant tray designed to improve germination and cloning success inside a high humidity space.
Clear, sturdy dome with glossy finish allows light penetration and locks atmospheric moisture in place.
Adjustable vents provide humidity control to lock in or release water vapor and achieve exact levels.
Lightweight 5x9 seedling tray can support up to 45 seedlings and is built to drain excess water.
Drip tray is durable, reusable, and ensures no water leakage while able to support heavier loads.
PRODUCT DESCRIPTIONA domed germination kit designed to promote successful plant growth and propagation by producing a high humidity environment. The transparent dome allows for optimal light saturation while offering easy observation of your plants’ progress. Adjustable vents on the dome offer complete humidity control through smooth and effortless rotating. This will allow you to precisely dial in the amount of atmospheric moisture inside the propagation dome, locking in lowering water vapor levels. The drip and seedling trays fit seamlessly to support up to 72 seedlings while catching excess water and preventing leaks in the process.
APPLICATIONSThis humidity dome serves as the ideal well-regulated environment for growing seedlings and cloning a wide variety of plants including spices and aromatics. Its compact and durable design can easily fit on balconies, window ledges, in your grow tent, or any room in your home. Quickly and easily transport the domed seedling tray as needed thanks to its practical size. Pair this with the a seedling heat mat to further improve germination success.
A smart sensor designed to give accurate temp, humidity, and VPD updates to maintain the ideal environment.
Corded probe provides accurate, fast-refresh readings and daily highs and lows of spot, remote locations.
Connect to our app via Bluetooth for remote climate monitoring, alarms, data graphs, and CSV charts.
Backlit LCD screen with desktop, wall, or magnetic mounting options to place and display anywhere.
Fit for use in many home and grow settings like greenhouses, grow tents, guitar rooms, and basements.
A smart hygrometer designed to provide accurate temperature, humidity, and VPD readings to help you maintain the ideal environment for your room. Tracking VPD (vapor pressure deficit) allows you to monitor ambient temperature, relative humidity, and plant leaf temperature, which provides more precise data than if you followed temperature and humidity alone. This model utilizes our steel thermalloy probe to accurately measure climate conditions and generate daily high and low readings of spot locations. Its digital LCD screen can produce a backlight that can display information in darker settings. So whether you are wall hanging, magnet mounting, or desktop placing the temperature sensor, you will be able to quickly inspect your space to react to sudden changes.
Advance ConnectivityConnect to the AC Infinity app for access to greater control of this smart hygrometer. This includes remote climate readings, trigger alarm programming, plus calibrations of temperature, humidity, and VPD readings. You can also receive custom push notifications on your smart device for rapid response to sharp peaks and dips. See historical climate data graphs to track trends and export as a CSV spreadsheet for further analysis.
ApplicationsThis smart indoor thermometer for home is fit for use as a grow room thermostat or nursery temperature monitor. Also fit in other grow settings like greenhouses, grow tents, and closet builds. The Bluetooth temperature, humidity, and VPD gauge can also be used for animal comfort in reptile terrariums or chicken coops. Other home uses include apartments, basements, and guitar rooms where humidity must be kept to a minimum.
200W UFO LED
Low power. Low Heat. High Efficiency
6400K - Perfect spectrum to promote lush leafy growth and strong plants
Great Penetration and Spread. Will cover 1.2 X 1.2 for a vegetive cycle
The Run off Flow Tray Works with small nursery pots, fabric pots, and standard containers up to 7 Gallons (26.50 Liters). Unlike your typical drain pans, The Run off Tray helps eliminate water overflow with its drainage design. Each Tray comes with 4 x 1-1/4" PVC Legs (6" Height) that can be used to elevate off cold floors or closer to lighting systems. With a 1/2" MPT Elbow fitting (included), these Runoff Trays can be assembled to any growing application that cultivators prefer.
*These tent kits can be modified to your liking, If you wish to upgrade or change anything - please ask :)
Automated Cloning Kit, Comes with everything you need to clone your favourite plants!
- SeaHawk Clone Tent (75x50x60)
- SeaHawk 24 site CloneStation
- PS1 2x24W Propagation Light or 26W LED Bar
- Yates Clonex Gel
- Cloning Accelerator Spray
- Disposable Scalpel
Make sure to let us know which light preference you have !
Powerful 1000W heater with smart AI control and a multi-configuration design to optimize the climate for all plant growth stages.Temperature and VPD programming powered by adaptive AI that dynamically adjusts output to maintain your target environment.Utilizes individual PTC plates with PWM control to deliver 10 true heat levels or intake fresh air for balanced climate control.Dual ports enable you to duct directly into your grow space or create a closed-loop setup for optimal heating efficiency (ducting not included).Connects with UIS controllers for WiFi app connectivity—unlocking advanced automations, data tracking, alerts, and grow guides
Intelligent Climate Control for Every Growth StageExperience precision-engineered climate management with this powerful 1000W AI-driven heater. Designed to optimize growth through every stage, it automatically adjusts temperature, airflow, and VPD to maintain your target environment. Individual PTC plates with PWM control deliver 10 true heat levels or fresh air intake for balanced conditions, while dual duct ports support both open- and closed-loop setups for versatile integration. This product is ETL-certified with safety features including tip-over alarms, flame-retardant materials, and overheat protection with auto-restart it delivers performance you can trust. Designed exclusively for indoor use. Operate only in controlled environments with humidity between 30%–65% RH, including incoming airflow. Do not use outdoors or in high-humidity areas. Do not use with humidifiers in closed-loop setups. Mist may enter intake ducting and damage the heater. Plug heaters only into a grounded wall outlet with surge protection. Never use extension cords or power strips, as this may cause overheating or melting. Do not share the outlet with other devices.
Adaptive AI for Predictive Climate ManagementPowered by adaptive AI, the system continuously learns from your environment to maintain precise temperature and VPD targets. Its intelligent algorithm dynamically adjusts output to match your programmed ranges, responding instantly to environmental fluctuations, throttling in precise percentages to deliver unmatched accuracy and control. When connected through UIS controllers, growers can access real-time data tracking, alerts, and advanced automation to maintain the perfect climate 24/7
Ulight 100 Watt Intercanopy LED
Power Lead included. Light Stand, Dimmer and link cables sold separately
Great results require the best equipment. Maximize plant growth and yield with the ULight Intercanopy 100W LED. Designed for placement within the plant canopy, it delivers full-spectrum light to promote healthy growth at all stages—seedling, vegetative, and flowering. With the ability to link up to 18 lights in series and versatile mounting options, it’s perfect for greenhouses and indoor farms. Durable and reliable, this grow light comes with a 3-year warranty for long-term performance.
LEG / STAND HEIGHT 23CM
Specifications:Full Spectrum Grow LightLink up to 18 lights in series using one power lead.Can be mounted in any orientationPerfect for professional growers looking for high-efficiency lighting solutions.Max. Power: 100W ± 3%Nominal Voltage: 200V – 277VNominal Current: 0.36A – 0.5APower Factor: >0.95 @ 100WInput Frequency: 50 – 60HzPlug Type: AUEfficacy: 2.9 µmol/JOutput: 290 PPFPhoton Flux: 18080 lmColor Temperature: 3350KSize: 1100 x 103 x 87mmWeight: 2.1 kgIP Rating: IP65Diodes: SamsungDiodes Quantity: 270 pcsBeam Angle: 150°Dimming: 0-10V or 20%, 40%, 60%, 80%, 100%Temperature Range: -20°C to 40°COperation Humidity: 10% to 95% RHCertifications: CE, RoHS, RCMWarranty Time: 3 years
Features Samsung LM301H EVO LEDs each rated at 3.14 µmol/J PPE, the highest efficiency of LM301B, LM301H, and Bridgelux 3030 chips.
Programmed with schedule controls, sunrise/sunset dimming, and 10 brightness levels; UIS™ platform-compatible for WiFi app control.Bar-style fixture with algorithmically spaced diodes optimized for even coverage, deep canopy penetration, and hotspot reduction.Passive cooling LED driver is removable to balance heat dissipation; also supports daisy-chaining with up to 80 grow lights.6 x 6 ft. Veg. Coverage | 5 x 5 ft. Flower Coverage | Samsung LM301H EVO Chips | 2688 Diodes | 730W | 2013 PPFD | ETL Cert. 5021417
Product DescriptionAn indoor plant grow light designed for grow tents and large grow spaces to improve your plant's growth rate and its yields. Utilizes Samsung LM301H EVO diodes that are algorithmically spaced on a bar-style form factor to evenly distribute lighting coverage while diminishing hotspots. Its modular design enables you to remove the driver to remotely mount it away from this fixture and balance heat dissipation. This heat dissipation is supported by its steel and aluminum build, which enables magnetic mounting and is IP-65-rated to withstand humid environments. This grow light meets ETL standards (certificate #5021417) for electrical appliance safety, ensuring secure use in lighting applications. The included smart controller features schedule programming and daisy-chain support to connect more bar LED grow lights in a linear arrangement by using splitter dongles (sold separately). This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment.
Industry-Leading LED ChipsEach IONFRAME light features genuine Samsung LM301H EVO diodes, the latest in horticulture lighting technology that emits intense brightness at greater efficiency. This performance is superior to leading Samsung LM301H and LM301B LEDs, as well as Bridgelux 3030, and other previous-generation LEDs. EVO diodes help improve plant growth by emitting greater light quality and more light output per diode, with a higher blue spectrum and greater efficiency when compared to non-EVO diodes. The IONFRAME EVO is supported by an array of (8) 395 nm UV diodes, (88) 660 nm OSRAM red diodes, and (8) 730 nm OSRAM far-red diodes to complete its full spectrum light output.
Schedule and Brightness ControlsThe included schedule controller can automatically adjust light based on the time of day. It features 10 light intensity levels and a scheduling mode that will cyclically activate this grow light. Customize this daily cycling with an innovative sunrise and sunset setting that gradually brightens and dims the lighting to accurately replicate the sun's movement. Use this grow light with an advance UIS controller like CONTROLLER 69 PRO to fully automate it by integrating it into the UIS platform. This will enable further access to remote control over WiFi and advance programming like automation and grow recipes when connecting to the AC Infinity app.
Introducing the ULight LED Grow Light - 1000W, the ideal choice for enthusiasts of indoor gardening. Discover the power of this innovative grow light, which will revolutionise the way you care for your plants.
This grow light improves your growing activities by focusing on advantages, simple management, and great quality. In accordance with the specific needs of your plants, adjust the brightness to ensure optimal growth at each stage. You have complete control over the entire process, from germination to flowering.
This grow light, which has been manufactured using top-notch materials, has a high-efficiency rating of 2.9 umol/j. It guarantees continuous performance and maximum longevity with 5040 high-quality diodes and a dependable driver. With its 680W power output, the ULight LED Grow Light offers exceptional energy efficiency.
By providing 2.9 umol/j, it minimizes energy consumption while maximizing plant growth, saving you money on electricity bills.
FEATURES
High-Power Efficiency: 1000W output with excellent 2.9μmol/J efficacy Premium Components: 5040 high-quality Samsung LEDs Complete Protection:
IP65 rating for dust/water resistance
Flexible Control: Multiple dimming options, including 0- 10V analog
Optimal Spectrum: 3300K colour temperature is ideal for flowering
Robust Construction: Heavy-duty 16kg unit with minimal packaging weight
Australian Ready: Includes AU plug for local compatibility Long-Term Reliability: Backed by a 3-year manufacturer's warranty
The JB magnetic ballast is specified for 600W High Pressure Sodium (HPS) lamps. It utilizes magnetic inductance to regulate voltage and current, enabling consistent lamp ignition, operation, and light output stability. This ballast supports standard AC input voltages common in lighting systems, offering thermal and open-circuit protection features. Designed for integration into Ballasts category fixtures under Lights & LED parent groupings, it ensures efficient power delivery and prolonged component life.
Gen 3 HELIOS 1000 EVO+ LED Grow Light - Maximize Your Yields with Cutting-Edge Technology
Introducing the Gen 3 HELIOS 1000 EVO+, New Zealand's premier LED Grow Light crafted for growers who demand the best. As one of the leading LED Grow Lights NZ offers, it is designed with a powerful combination of SAMSUNG LM301H EVO Diodes, Samsung LM301H Diodes, Bridgelux, and OSRAM Diodes, delivering optimal light for explosive growth and bountiful harvests.
Rated Flowering Coverage reaching 1.5m x 1.5m for high demand plants, Veg coverage exceeds 1.8m x 1.8m when the intensity is adjusted via the integrate Dimmer.
With high-performance diodes, each running at lower wattage for reduced heat and increased light output, the HELIOS 1000 EVO+ ensures maximum efficiency. The supplemented red diodes achieve an impressive 3.8 μmol/J efficacy, while the main white diodes deliver up to 3.14 μmol/J, promoting vigorous growth from seedling to bloom. This advanced design makes it a standout choice for those seeking the most efficient LED Grow Lights.
Experience superior canopy penetration and even light distribution, thanks to its algorithmically engineered heatsink and diode structure. Enhanced thermal management with ultra-wide heatsinks keeps your grow space cool while extending diode lifespan, making it a durable and reliable option among LED Grow Lights NZ.
Enhanced Thermal Management: Equipped with ultra-wide, brand-new heatsinks and increased diode capacity, the EVO+ offers superior thermal control. This innovation enhances diode longevity, maintains light output quality, and ensures consistent real-world performance in commercial growing environments across New Zealand.
Built for durability, the sleek, compact design integrates effortlessly into any setup—commercial or home. Plus, with a 5-year Herbal House warranty and over 50,000 hours of reliable performance, you can grow with confidence, knowing you have one of the most trusted LED Grow Lights in New Zealand.
Trusted Reliability: Backed by a 5-year Herbal House warranty and rated for over 50,000 hours of consistent performance, the EVO+ allows growers to focus on cultivating exceptional plants with complete peace of mind.
Key Highlights:
Average PPFD: 1606 µmol/m²/sThis high average demonstrates consistent light distribution, ensuring robust growth across the entire canopy.
Peak PPFD: 1910 µmol/m²/sLocated at the center, this intensity supports dense bud formation and optimal flowering performance.
Edge Uniformity:Maintains strong PPFD levels above 1200 µmol/m²/s at the edges, reducing the need for supplemental lighting.
Efficacy: 1.61 µmol/J Calculated by dividing the average PPFD by the 1000W power consumption, highlighting exceptional energy efficiency for commercial and home growers alike.
The HELIOS 1000 EVO+ not only delivers powerful, uniform light but also ensures energy-efficient performance, making it a top choice for maximizing yields in any indoor grow environment.
Greencoir Coco Premium 100% Buffered Coir is a professional-grade growing substrate made from high-quality aged coco coir, providing excellent moisture retention, aeration, and root support for optimal plant performance.
Produced using RHP certified coco coir, the material is carefully aged, washed, and fully buffered to ensure a stable and reliable growing medium with low EC and consistent quality. The buffering process is carried out using calcium nitrate treatment, which removes excess sodium and potassium while pre-loading the coir with calcium. This stabilises the growing medium, reduces nutrient lock-up, and ensures consistent plant performance from the start.
The natural structure of coco coir offers an excellent balance between water retention and air porosity, allowing roots to access both moisture and oxygen efficiently. This supports strong root development, improves nutrient uptake, and promotes vigorous plant growth.
With its stable structure and consistent quality, growers can confidently implement controlled feeding programs while maintaining optimal root zone conditions.
To ensure reliability and performance, every production batch is tested for EC, pH, and quality standards prior to packing.
