TrolMaster

240V Temperature Device Station（DST-2）*Suited for Nz plugs (not pictured) The TrolMaster DST-2 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. Any heating or cooling device that is 10-amps @ 240 volts or less can be controlled by the DST-2.   LED status:* Blinking green FAST: If the LED is blinking quickly, that means the module has not been addressed to the controller OR that module does not have a good connection to the controller. *Pressing the small button on the module will address/link the module when first installed.* Blinking green SLOW: If you see a slowly blinking green LED, that means the module is addressed and connected to the controller, and the module is currently turned OFF.* SOLID green: If you see the LED is on solid (no blinking) that means the modules are addressed, connected and currently turned ON.* Blinking red: If you see the LED change to blinking red, that means the module has been overloaded. To reset the overload unplug the module from the power.   LED Power Indicator RJ12 Cable Socket Addressing Plug & Play 

Read more less

RJ12 to 3.5 Jack Extension Cable Set（ECS-2） The ECS-2 Extension Cable Set is designed to connect Hydro-X to most LED drivers with a pigtail wiring. The ECS-2 comes with a 16 ft RJ12 cable, a Y-splitter and a special 4 ft RJ12 / 3.5mm jack cable. The special cable connects to your lighting fixture / LED driver using the two-screw terminal block to connect to loose wires on the LED driver. Simply connect the two wires from your LED driver to the terminal block, each of the lights being controlled are wired in a “daisy-chain” configuration back to the Hydro-X LMA adapter.

Read more less

TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option. This LMA-14 lighting adapter is specially designed for the lights with 0-10V protocol control HIDs: Gavita/Nanolux/Luxx/Growers Choice/Illuminar/PL LEDs: Fluence/Next light/Photobio   NOTE: Each LMA-14 can control up to 40 HID lights or 24 LEDs. Additional LMA-14 adapters can be used with the SPH-1 to control as many lights as required.   *When using with Fluence Spyder 2x/2i fixtures @ 277v, no more than 12 LEDs per LMA-14

Read more less

240V Humidity Device Station（DSH-2）(To fit NZ plugs, Not pictured) The TrolMaster DSH-2 Humidity control / device modules (240V) allow the user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-x. The DSH modules are rated @ 10-amps. *Use with dehumidifiers less than 7 amps to avoid current overload.   LED status:* Blinking green FAST: If the LED is blinking quickly, that means the module has not been addressed to the controller OR that module does not have a good connection to the controller. *Pressing the small button on the module will address/link the module when first installed.* Blinking green SLOW: If you see a slowly blinking green LED, that means the module is addressed and connected to the controller, and the module is currently turned OFF.* SOLID green: If you see the LED is on solid (no blinking) that means the modules are addressed, connected and currently turned ON.* Blinking red: If you see the LED change to blinking red, that means the module has been overloaded. To reset the overload unplug the module from the power.    

Read more less

TrolMaster Grow Camera（TC-1） The TrolMaster Grow Camera (TC-1) is a high-quality surveillance camera specifically designed for grow rooms, providing 24-7 live video monitoring of your grow area. It is specifically designed to work with any of the TrolMaster HCS controllers by "linking" the camera to a HCS controller that is also connected to the app. The TC-1’s built-in night vision has been engineered to use invisible (plant safe) IR illuminators to prevent disrupting the morphology of the plant during the dark period. TC-1 features night vision with the ability to see up to 35ft by using ultra-low infrared emissions that are safe for plants during the day and night. TC-1 also utilizes TrolMaster’s free phone app called TM+ / TM+ Pro. Using the TC-1 and the TM+ / TM+ Pro app provides 3 megapixels of low-latency internet live footage. A built-in MicroSD card slot is also available for video recording.

Read more less

Hydro-X Environment Control System （HCS-1）  The Hydro-X system is a professional-grade single zone environmental system. It is fully customizable and modularly designed. Installation is simple and the system is easy to expand upon. The Hydro-X system can control most grow lights brands, HVAC systems, mini-split air conditioners, commercial dehumidifiers and humidifiers, as well as CO2 generators or regulators. With the free TrolMaster App, the user can access all of the settings and alerts on the system from anywhere at anytime.   *The HCS-1 is the brain of the Hydro-X system. It comes with a 3-in-1 Temp/Humid/Photocell sensor. *Internet Connection Note: TrolMaster's main controllers can be connected to the internet in order to use the available APP. Most internet services available including land-based and cellular internet are compatible. However, HughesNet / Viasat Satellite internet is NOT compatible with TrolMaster controllers at this time. Data Record Note: The HCS-1 can record the data coming in from the sensors onto a CSV file. To use this feature, you must first insert a MicroSD card 32GB or less into the MicroSD slot on the bottom of the HCS-1 or NFS-1 controllers. Once the card is inserted, the unit will automatically store data so it can be viewed later.

Read more less

CO2 Sensor for Hydro-X only（MBS-S8） The optional CO2 Sensor (MBS-S8) measures the CO2 PPM within the growing area. Using the MBS-S8 allows the users to connect and control their supplemental CO2 system using the Hydro-X. *Used in combination with one or more DSC-1 CO2 device modules.     "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"   

Read more less

TROLMASTER - HYDRO X CO2 CONTROL STATION The TrolMaster DSC-2 CO2 control / device module allows user to easily connect and control standard supplemental CO2 devices or CO2 exhaust controls to the Hydro-x. Any CO2 device that is 10-amps @ 240 volts or less can be controlled by the DSC-2 SPECIFICATIONS: Input Voltage: 100~240 VAC, 50/60Hz LED status:* Blinking green FAST: If the LED is blinking quickly, that means the module has not been addressed to the controller OR that module does not have a good connection to the controller. *Pressing the small button on the module will address/link the module when first installed.* Blinking green SLOW: If you see a slowly blinking green LED, that means the module is addressed and connected to the controller, and the module is currently turned OFF.* SOLID green: If you see the LED is on solid (no blinking) that means the modules are addressed, connected and currently turned ON.* Blinking red: If you see the LED change to blinking red, that means the module has been overloaded. To reset the overload unplug the module from the power.

Read more less

The BETA-8 CO2 controller offers a precision CO2 NDIR sensor / controller in an affordable easy-to-use package. The BETA-8 features a high-quality remote CO2 sensor (with 16ft cable) and built-in photocell to automatically activate your supplemental CO2 system to maintain CO2 PPM levels only during daylight hours. The BETA-8 also has adjustable deadband and min-max recall. It also has a ‘fuzzy-logic’ feature which will more accurately control compressed CO2 systems.The CO2 sensor can be easily re-calibrated and will continue to operate accurately for many years. For use with Co2 generators or compressed Co2

Read more less

 AC Remote Station （ARS-1） The ARS-1 mini-split air conditioner controller is a unique product that solves the age-old problem of having separate day and night temperature settings on your mini-split air conditioners. The ARS-1 is a universal controller that works with most mini-split air conditioners (and some window-type AC units too), as long as the unit came with an IR / infrared remote controller. We use the remote control that came with the unit to “teach” those IR signals to the ARS-1 module. Once the ARS-1 “learns” those remote control codes, the ARS-1 will send those same signals to the indoor mini-split head unit changing the setpoint to the desired Day or Night temperature setting automatically base on the photocell sensor status.  *Note: The ARS-1 is currently not compatible with the following brands of devices: Daiken, Mr. Cool, Innovair, Denali Aire, Cooper and Hunter. *Firmware Update Note: To update firmware on the TrolMaster's controllers and modules, you must use a Micro SD card that is 32GB or less capacity. Package Content  1 x AC Remote Station (ARS-1) 1 x Signal Emitter 1 x 16ft RJ12 Cable 1 x 4ft RJ12 Cable 1 x RJ12 T-Splitter

Read more less