Description
Description
Overview
High-capacity moisture removal. Compact, efficient design.
The Quest 200 50Hz dehumidifier delivers the perfect balance of high-capacity moisture removal and exceptional energy efficiency, making it a smart solution for growers and facility operators needing dependable moisture control in moderate-sized environments. Built for 50Hz regions, this unit excels where space, performance, and energy use must align.
Powered by Quest’s proprietary M‑CoRR Technology, the Quest 200 50Hz dehumidifier delivers superior efficiency, pulling 3.9 L/kWh. Its high efficiency and reduced heat output contribute to operational cost savings. Quality-built with a compact footprint, the Quest 200 is easy to integrate without compromising valuable space or environmental stability.
With this next generation of product, Quest has eliminated the need for a separate hang kit, making installation simpler than ever. Simply insert threaded rod into the built-in lift and hang points for easy installation.
A robust digital control system enables fine-tuned RH setpoints, preventative maintenance notifications, diagnostic feedback, and a dark mode setting to support low-light environments.
Engineered and assembled in the USA, the Quest 200 50Hz is a reliable, space-conscious, high-performance solution for facilities looking to maximize environmental control and operations.
Technical Specifications
| Specification |
Value |
| @ 26.7 °C | 60% RH |
| Water Removal |
90 Liters/Day |
| Efficiency |
8.3 Pints/kWh |
| Energy Factor |
3.9 Liters/kWh |
| Current Draw |
4.2 Amps |
| Power |
1,220 Watts |
| BTU (Total) |
11,900 |
| BTU (Heat of Condensation) |
8,600 |
| BTU (Motor Load) |
3,300 |
| @ 23.9 °C | 50% RH |
| Water Removal |
57.7 Liters/Day |
| Efficiency |
5.8 Pints/kWh |
| Energy Factor |
2.7 Liters/kWh |
| Current Draw |
3.8 Amps |
| General Specifications |
| Part Number |
4046100-NC |
| Dehumidifier Type |
Refrigerant Dehumidifier |
| CFM |
500 |
| Operating Temperature |
13 °C Min–35 °C Max |
| Supply Voltage |
230 V |
| Unit Dimensions |
68cm (L) × 60cm (W) × 53cm (H) |
| Unit Weight |
58.9 kg |
| Control Type |
Onboard digital controls with low voltage terminal block |
| Air Filter MERV Rating |
MERV 13 |
| Air Filter Dimensions |
45.7 × 45.7 × 5.1 cm |
| Recommended Breaker Size (UK) |
13 Amp |
| Recommended Breaker Size (EU, AU, ZA) |
10 Amp |
| Power Cord |
3m FEM IEC 60320-C13 |
| Refrigerant Type |
R454B |
| Refrigerant Amount |
1,446 g (51 oz) |
| Drain Port Connection |
1.9cm Threaded NPT |
| Fans |
Single Speed Impeller |
