The Pro-Leaf Multi-Function Environmental Controller, BECC-B2, offers full control of the indoor garden environmental, with four 240-volt receptacles for cooling, humidity, Co2 and heating devices. This advanced unit precisely monitors and manages co2 in a range of 400-2000 parts per million with an adjustable deadband. Featuring fuzzy-logic technology to provide even greater control in compressed co2 setups. The BECC-B2 regulates tempberature in a control range of 5-50 degrees centigrade, and relative humidity in a range of 5-95 percent, both with adjustable deadbands. Photocell control allows for separate day and night settings of temperature and humidity. The BECC-B2 includes a remote sensor on a 4.5m cable with integrated photocell.
Precise Temperature, Humidity and CO2 ppm Level Control.
Real Time Digital displays.
Controls up to four devices Cooling-Heating-Humidity-CO2.
Seperate Day & Night Temp set points.
Fuzzy Logic ppm up & down control modes.
High & Low Temp protection.
Accurate amphenol CO2 Sensor with Calibration function.
Humidify & Dehumidify modes.
CO2 Range 400 to 2000ppm accurate within +/-100ppm.
Foliar feeding is a technique of feeding plants by applying liquid fertilizer directly to their leaves.
Without an established root zone, you need a high quality foliar spray to supply your plants the nutrients they need for healthy growth and development.
Foliar feeding is a technique of feeding plants by applying liquid fertilizer directly to their leaves. When a part of a plant is cut, and this part has no root system, the ability of the cutting to get nutrients from its surroundings becomes minimal. In order to supply suitable nutrients to the plant, a foliar spray should be applied.
Cloning Accelerator delivers key nutrients and trace elements through foliar spraying of the leaves. It’s perfectly balanced formula has been specifically created to deliver the right amount of ph adjusted nutrient to young and delicate plants.
Cloning Accelerator contains Humic Acid which research has shown when foliar applied can boost photosynthesis, improve growth and development . It also contains crucial elements which are designed to restore any discolouring which may occur during the life of the cutting.
• Speeds root development and early establishment• Chelated minerals formulated as a RTU Foliar Spray for maximum absorption• Protects young plants from deficiencies• Accelerates growth rates and chlorophyll production
Professor's Nutrients Extreme Boost – Bulking/RipeningHeavy fruiting and flowering plants require high levels of Phosphorus and Potassium for larger fruits and flowers.The Professor’s Extreme Boost takes this to the next level by providing very high amounts of pure PK exactly when the plant demands it.The Professor’s Extreme Boost uses high grade minerals in extreme concentrations to give your plants a heavy, fully developed finish during the last few weeks of bloom. This greatly aids and accelerates the final ripening and bulking process in fruits and flowers.Extreme Weight increase of more than 20% are commonly reported!• Creates harder flowers with more bud weight• Accelerates the ripening process• Extreme PK levels for faster reaction• Increased brix levels and resin productionApplicationHydroponics : Use 2gms per 4L of nutrient solutionSoil : Use 2gms per 4L of nutrient solutionExtreme Boost should only be used 2-3 weeks before harvest1 x Scoop into 35L (Scoop Provided
Professor's Nutrients Extreme Boost – Bulking/RipeningHeavy fruiting and flowering plants require high levels of Phosphorus and Potassium for larger fruits and flowers.The Professor’s Extreme Boost takes this to the next level by providing very high amounts of pure PK exactly when the plant demands it.The Professor’s Extreme Boost uses high grade minerals in extreme concentrations to give your plants a heavy, fully developed finish during the last few weeks of bloom. This greatly aids and accelerates the final ripening and bulking process in fruits and flowers.Extreme Weight increase of more than 20% are commonly reported!• Creates harder flowers with more bud weight• Accelerates the ripening process• Extreme PK levels for faster reaction• Increased brix levels and resin productionApplicationHydroponics : Use 2gms per 4L of nutrient solutionSoil : Use 2gms per 4L of nutrient solutionExtreme Boost should only be used 2-3 weeks before harvest1 x Scoop into 35L (Scoop Provided)
Each PS-1 kit contains 2 x 24 watt high output fluoro lamps with their own highly efficient reflector.
The first lamp connects directly into a 240 volt power source. Then, for additional lamps, it's just a matter of plugging the next lamp into the back of the first lamp with a link cable. Up to 8 lamps can be run in each circuit.
The lamps can be fitted side by side, or spaced to suit the needs of the environment. The PS-1 is a very efficient T5 fluoro lighting system that enables you to create and customise individual lighting needs.
For Seeds Seedlings, Clones, Propagation
Description
Grow room monitoring. Anytime. Anywhere.
Improve your grow with remote monitoring of temperature, RH, light, and VPD, custom alert, and integrated journaling.
Monitor your garden’s conditions from anywhere. Set alerts that notify you when something goes wrong.
Increase yields and reduce waste. Understand the impacts your actions have on your grow room’s environment.
Temperature – Your plants need consistent temperature for maximum yields.
Humidity – Ideal RH promotes the absorption of nutrients and plant health.
VPD – Maintain the correct VPD for optimal nutrient uptake.
Light – Ensure that your daylight hours match your stage of growth.
Dew Point – Dew point is the key to avoiding condensation and preventing mould.
Connectivity Issues
Power Outages
The ultimate grow room monitor. Pulse Pro is the big brother of the Pulse One, including all of the same features plus these additional sensors & hardware:CO2 data: Dual-channel NDIR, ±(50ppm + 3%MV)PPFD/PAR: Measures the total number of photons within the PAR region specific to plant growth (11 channels, 350nm to 1000nm)Spectrum & color analysis: Measures your light's color spectrum outputLight flicker frequency: Detect unwanted voltage changes and assess ballast & bulb healthLithium-ion rechargeable battery: Allows for wireless, handheld operation while taking PPFD measurements & ongoing data logging during power outages
Included features remotely accessible via the Pulse app (PC, iOS, Android):🌠Unlimited number of sensors & live data, including multiple locations & WiFi networks viewable on one dashboard📡 Instant, reliable alerts customizable to each zone📋 Easily adjust alert profiles on multiple devices with the template manager📊 Day & night averages for any selected time periodâš¡ Connectivity & power outage notificationsâ˜ï¸ VPD-LST offset calibration for accurate VPD data📓 Garden calendar & journal
Contact us to secure yourself a unit and also get exact shipping quote! These are very sought after and is best to pre order
Quest 100 Overview
Capacity 100 Pints/Day
Efficiency 7.5 Pints/kWh
Supply Voltage 110-120V, 60 Hz
Current Draw 5 Amps
Re-engineered with a more environmentally friendly refrigerant, R454B, the Quest 100 combines efficiency and sustainability with the versatility and flexibility of its compact footprint. This makes it the perfect dehumidifier for small projects and spaces.
M-CoRR TechnologyThis patented multi-coil design provides the highest efficiencies available on the market, saving energy and dollars.
In addition to our industry-leading coil system, the Quest 100 features premium MERV-13 filtration without compromising capacity or efficiency. This superior filtration helps to prevent the start or spread of bacteria, mold, or other contaminants around your precious plants, equipment, and crew with 65% more effectiveness than MERV-8 and 20% more effectiveness than MERV-11. MERV-13 filtration means healthier air and more control over your environment.
With a corrosion-resistant base and smaller footprint, the Quest 100 has flexible placement options, with less worry of rust, even after watering your plants or washing down your room.
Description
Overview
High-capacity moisture removal. Compact, efficient design.
The Quest 200 50Hz dehumidifier delivers the perfect balance of high-capacity moisture removal and exceptional energy efficiency, making it a smart solution for growers and facility operators needing dependable moisture control in moderate-sized environments. Built for 50Hz regions, this unit excels where space, performance, and energy use must align.
Powered by Quest’s proprietary M‑CoRR Technology, the Quest 200 50Hz dehumidifier delivers superior efficiency, pulling 3.9 L/kWh. Its high efficiency and reduced heat output contribute to operational cost savings. Quality-built with a compact footprint, the Quest 200 is easy to integrate without compromising valuable space or environmental stability.
With this next generation of product, Quest has eliminated the need for a separate hang kit, making installation simpler than ever. Simply insert threaded rod into the built-in lift and hang points for easy installation.
A robust digital control system enables fine-tuned RH setpoints, preventative maintenance notifications, diagnostic feedback, and a dark mode setting to support low-light environments.
Engineered and assembled in the USA, the Quest 200 50Hz is a reliable, space-conscious, high-performance solution for facilities looking to maximize environmental control and operations.
Technical Specifications
Specification
Value
@ 26.7 °C | 60% RH
Water Removal
90 Liters/Day
Efficiency
8.3 Pints/kWh
Energy Factor
3.9 Liters/kWh
Current Draw
4.2 Amps
Power
1,220 Watts
BTU (Total)
11,900
BTU (Heat of Condensation)
8,600
BTU (Motor Load)
3,300
@ 23.9 °C | 50% RH
Water Removal
57.7 Liters/Day
Efficiency
5.8 Pints/kWh
Energy Factor
2.7 Liters/kWh
Current Draw
3.8 Amps
General Specifications
Part Number
4046100-NC
Dehumidifier Type
Refrigerant Dehumidifier
CFM
500
Operating Temperature
13 °C Min–35 °C Max
Supply Voltage
230 V
Unit Dimensions
68cm (L) × 60cm (W) × 53cm (H)
Unit Weight
58.9 kg
Control Type
Onboard digital controls with low voltage terminal block
Air Filter MERV Rating
MERV 13
Air Filter Dimensions
45.7 × 45.7 × 5.1 cm
Recommended Breaker Size (UK)
13 Amp
Recommended Breaker Size (EU, AU, ZA)
10 Amp
Power Cord
3m FEM IEC 60320-C13
Refrigerant Type
R454B
Refrigerant Amount
1,446 g (51 oz)
Drain Port Connection
1.9cm Threaded NPT
Fans
Single Speed Impeller
The RapidClone is a new and completely automated cuttings unit. This is a unit, we at HydroGarden have designed and made for many years. With great feedback and results!
Deep water culture (DWC) Is a very effective, hydroponic method for producing rapid root growth - FAST
The RapidClone Unit, uses rockwool, which in inserted into the polystyrene tray. This tray will float on the water in the bin, which is heated with a thermal controlled water heater, and also aerated via air pump and air stone. Creating a spa pool for your roots! Giving you upto 49 clones, ready in 10 days - 2 weeks!
This unit comes with everything you need to get started, including twin 24W fluorescent light, water heater, air pump and stone, cloning gel and scalpel
It allows the owner to set it up for operation within minutes, then leave it running unattended for up to two weeks!! It's suitable for growers in hydro, coco or soil, and it will produce a massive 95% to 100% strike rate!! This unit is so very very easy to set up and use. It comes in a complete kit-set form with an instruction manual on how to set it up, and a free in-depth chapter on how to take cuttings successfully
Price for 1 x Root control pad
The Gold and Blck root control discs are made to fit both the green 8 litre AutoPot and the black 15 Litre AutoPot.
The black and glod root control disc is placed in the base of the AutoPot tray to help prevent stray roots growing towards the Auqa Valve and at the same time helps to control algae.
Non stick fluorine coated scissors are perfect for any trimming application. Made of high quality Japanese stainless steel, these bonsai style scissors are easier on your hands and allow for more precise cutting motions.
Slim tip design blades allow for maximum precision when cutting in tight and close quarters.
Easy grip ergonomic design to relieve pressure on the wrist and hand.
Blade Length: 48mm
The smaller (inlet) fitting is used to pump nutrient into the tray (flooding)
While the larger (outlet) fitting with the extension sits higher in the tray. Once the nutrient level in the tray reaches the height of the outlet screen, the excess nutrient can drain back to a reservoir.
The extension can be adjusted for more height, and extra extensions can be added for a deeper tray.
GENERAL ALL PURPOSE FERTILISER PACKED WITH NPK
Seacliff Organics 6-6-6 Balanced Fert is, just as the title suggests, a great general purpose all-round fertiliser packed with NPK and trace minerals, formulated to promote strong healthy plant growth and fruit production, and will also improve and balance your soil fertility over time, and help keep your soil nutrient rich so your next crops of fruit, flowers, or vegetables can get off to a flying start.
Ingredients:- Amino Acids- Fish Bone Meal- Sulphate of Potash, - Humic Acid- Fulvic Acid, - Chelated Trace Minerals.
N-P-K = 6-6-6
APPLICATION RATES:New Vegetable Plantings: Prior to planting seeds or vegetables, use 1kg (6 cups) for every 5sqm of garden area. Mix thoroughly into the top 16-20cm of soil.
Established Vegetable Gardens: Feed established plants every 4-6 weeks as needed through the growing season. Use 3 cups for every 5sqm. For individual plants use 1Tbs. Lightly mix into the soil surface and water thoroughly.
Large Plants (Tomatoes, Corn, etc): Feed every 30 days as needed through the growing season until fruit begins to set. Use 2-4Tbs per plant depending on size, applied to an area 30-40cm wide around the main stem. Mix lightly with soil and water thoroughly.
Container Grown Vegetables: Apply 1Tbs for every 16cm of pot diameter every 30 days or as needed through the growing season. Spread evenly over the soil surface, mix lightly into it, and water.
A COMPLETE DRY SLOW RELEASE FERTILISER Seacliff Organics Balanced Fertiliser Mix is an all-in-one solution for living soils with a balanced cation ratio, simply topdress with compost (the ideal source of complete biology) and water in, let nature do the rest! The Seacliff Organics Balanced Fertiliser Mix helps to promote a healthy soil ecology and is full of nutrients and trace elements to balance your soil over time. We take the legwork out of soil balancing, by combining an expertly selected array of dry amendments in one mix.
Using just the right ingredients in the right ratios all the way down to the trace minerals with no unnecessary additives ensures a clean product that will provide high-quality results.
This blend was based on Steve Solomon's C.O.F fertiliser mix, to learn more read "The Intelligent Gardener"
For general garden use, apply use 6L per 10sqm of soil. This is best used mixed with compost and layered on top for no-till, or dug through your soil with a small amount of compost.
For performance potting soil, mix at 3.5 percent into your medium.
SEACLIFF ORGANICS BALANCED FERTILISER MIX CONTAINS: Ag lime, gypsum, Soft rock phosphate, flax seed meal, karanja meal, neem meal, fish meal, malted barely, Acadian Kelp, Zelp, paramagnetic Andesite rock dust, Basalt rock dust, potassium sulfate, Biomin copper, Biomin zinc, Biomin boron, Biomin manganese + Humic acid
A DIVERSE BLEND OF MICROORGANISMSMicrobe-Pro is a combination of beneficial microbes which improve soil health and function and can be used in a variety of applications from improving fertilizer effectiveness to aiding in decomposition and odour control in waste management systems.
You can apply Microbe-Pro during important plant growth stages, when adding in fresh compost to garden beds, adding with organic fertilizers and soil amendments, or adding to compost piles to improve microbiological diversity thus speeding up decomposition and improving compost quality.
This Microbe-Pro is ready to use!
Add 10ml per liter of water (37ml per gallon) and water into soil once weekly.
CONTAINS
Lactobacillus plantariumLactobacillus caseiLactobacillus fertmentumLactobacillus delbrueckiiBacillus subtilisSaccharomyces cerevisiaeRhodopseudomonas palustris (Photosynthetic bacteria)
UNLOCK THE FULL POTENTIAL OF YOUR ROOTSGuaranteed to be at least 100propagules/ml.
The symbiotic relationship with plants helps plants access nutrients and water.Mycorrhizal Fungi are especially effective when used in sterile potting mediums, or bare soil
Mycorrhizal Fungi are heat-sensitive. Avoid any exposure to excessive heat sources, as this may render the fungi inactive.
Ensure to inoculate, directly to the roots or transplant hole as early as possible in the plant's life cycle
This Mycorrhizal Fungi contains the following strains:
Claroideoglomus lamellosumFunneliformis mosseaeScutellospora calosporaRECOMMENDED USAGEMycorrhizal Fungi powder is most effective when applied directly to the root zone during transplanting. It can be sprinkled onto roots during transplanting, worked into seed beds, blended into potting soil before transplant or applied as a root dip.
When applied to the soil, it should be worked into the top 25-100mm of soil directly where the roots will contact it at a rate of 5-200grams per 1m2
For potting soils, use 2.5-5% by volume.
NZ NATIVE MYCORRHIZAL FUNGIHelps Plants Access Nutrients and Water Better value per spore than the original formula.
30propagules/mL, requires a new application rate.
The symbiotic relationship with plants helps plants access nutrients and water. Mycorrhizal Fungi are especially effective when used in sterile potting mediums, or bare soil
Mycorrhizal Fungi are heat-sensitive. Avoid any exposure to excessive heat sources, as this may render the fungi inactive.
Ensure to inoculate, directly to the roots or transplant hole as early as possible in the plant's life cycle
This Mycorrhizal Fungi contains the following strains of Endo mycorizhal:
Claroideoglomus lamellosuFunneliformis mosseaeScutellospora calospora Recommended Usage:Mycorrhizal Fungi powder is most effective when applied directly to the root zone during transplanting. It can be sprinkled onto roots during transplanting, worked into seed beds, blended into potting soil before transplant or applied as a root dip.
When applied to the soil, it should be worked into the top 25-100mm of soil directly where the roots will contact it at a rate of 1.5tbs - 3.5 cups per 1m2
Handling: Wear a mask to avoid inhaling particles, open in a well ventilated areaWear gloves and eye protection, and wash hands after use
Storage: Once opened, keep sealed and dry
Warning: This product is made from organic materials which contain living microorganisms. This product also contains mineral additives.If ingested, product comes into contact with eyes or skin irritation is present, rinse area well and call the National Poisons Centre on 0800 POISON (0800 764 766)
NEXT GEN ROOT FORMULA10kg = Inoculates 1,000 Plants2kg = Inoculates 200 Plants500g = Inoculates 50 Plants100g = Inoculates 10 Plants
Introducing Nex Gen Root Formula - the ultimate all-in-one solution for dramatic plant growth. Our powerful mycorrhizal inoculum and microbial inoculant are expertly blended with root boosters and bio-stimulants to deliver maximum results.
We've carefully selected the highest quality ingredients and blended them at optimal ratios, based on the latest research, to promote substantial root growth and ongoing nutrient cycling.
For best results, apply Nex Gen Root Formula as early as possible in the plant's life, directly to the roots or the soil where early roots will develop (3 tsp per 500ml). You can also use it during any stage of plant growth, from seed germination to budding and flowering, for a microbial and bio-stimulant boost. Not only does Nex Gen Root Formula benefit your plants now, but it also improves soil conditions for the future.
Mycorrhizal fungi at a minimum of 450 propagules per gram.
Ingredients:Ful Humix (High Quality Humic Acid and Fulvic Acid), Tri Kelp, Super Fine Aglime, Potassium Silicate, Micronised Whole Leaf Aloe Powder, Micronised Soft Rock Phosphate, Amino Acid Powder, Glomus Intraradices, Glomus Mosseae, Claroideoglomus Lamellosu, Funneliformis Mosseae, Scutellospora Calospora, Trichoderma Harzianum, Lactobacillus Plantarium, Lactobacillus Casei, Lactobacillus Fertmentum, Lactobacillus Delbrueckii, Bacillus Subtilis, Saccharomyces Cerevisiae, Rhodopseudomonas Palustris (Photosynthetic Bacteria)
Recommended Usage:
3tsp/500ml soilHandling:
Wear a mask to avoid inhaling particles, open in a well ventilated areaWear gloves and eye protection, and wash hands after useStorage:
Once opened, keep sealed and stored out of direct sunlightWarning:
If ingested, product comes into contact with eyes or skin irritation is present, rinse area well and call the National Poisons Centre on 0800 POISON (0800 764 766)
NEXT GEN ROOT FORMULA10kg = Inoculates 1,000 Plants2kg = Inoculates 200 Plants500g = Inoculates 50 Plants100g = Inoculates 10 Plants
Introducing Nex Gen Root Formula - the ultimate all-in-one solution for dramatic plant growth. Our powerful mycorrhizal inoculum and microbial inoculant are expertly blended with root boosters and bio-stimulants to deliver maximum results.
We've carefully selected the highest quality ingredients and blended them at optimal ratios, based on the latest research, to promote substantial root growth and ongoing nutrient cycling.
For best results, apply Nex Gen Root Formula as early as possible in the plant's life, directly to the roots or the soil where early roots will develop (3 tsp per 500ml). You can also use it during any stage of plant growth, from seed germination to budding and flowering, for a microbial and bio-stimulant boost. Not only does Nex Gen Root Formula benefit your plants now, but it also improves soil conditions for the future.
Mycorrhizal fungi at a minimum of 450 propagules per gram.
Ingredients:Ful Humix (High Quality Humic Acid and Fulvic Acid), Tri Kelp, Super Fine Aglime, Potassium Silicate, Micronised Whole Leaf Aloe Powder, Micronised Soft Rock Phosphate, Amino Acid Powder, Glomus Intraradices, Glomus Mosseae, Claroideoglomus Lamellosu, Funneliformis Mosseae, Scutellospora Calospora, Trichoderma Harzianum, Lactobacillus Plantarium, Lactobacillus Casei, Lactobacillus Fertmentum, Lactobacillus Delbrueckii, Bacillus Subtilis, Saccharomyces Cerevisiae, Rhodopseudomonas Palustris (Photosynthetic Bacteria)
Recommended Usage:
3tsp/500ml soilHandling:
Wear a mask to avoid inhaling particles, open in a well ventilated areaWear gloves and eye protection, and wash hands after useStorage:
Once opened, keep sealed and stored out of direct sunlightWarning:
If ingested, product comes into contact with eyes or skin irritation is present, rinse area well and call the National Poisons Centre on 0800 POISON (0800 764 766)
AN ORGANIC FERTILISER FOR A SPECTACULAR BLOOM! Seacliff Organics Opulent Bloom Mix is a dry amendment nutrient mix designed to take your flowers to the next level with a hearty boost of potassium, phosphorous and magnesium to ensure an easy nutrient uptake. The Seacliff Organics Opulent Bloom Mix helps to promote vigorous flowering designed specifically for heavy feeding plants in their flowering phase to increase resin production and flower density in soil media.
RECOMMENDED USAGESimply topdress, cover with a fresh layer of compost or worm castings (the ideal source of complete biology) and water in!
Apply 2-6 cups per 50L of soil, or 1-3 cups per square meter. This is best used mixed with compost and layered on top, scratched into topsoil, and watered in.
Topdress 1 - 3 times during flower
Full batch analysis below;
NPK 1.6/9.5/5.1 + 3.9 Sulfur
Nitrogen % 1.6Phosphorus % 9.5Potassium % 5.1Acid Soluble Sulfur % 3.9Calcium % 23.4Magnesium % 11Sodium % 0.5Iron % 0.10Copper mg/kg 52Manganese mg/kg 200Zinc mg/kg 200Boron mg/kg 120Cobalt mg/kg 7Molybdenum mg/kg 18Selenium mg/kg 27OPULENT BLOOM MIX CONTAINS: Fish bone meal, langbeinite, Gypsum, Potash, TM7, Biophos
RICH IN CALCIUM (35%) AND SILICON (65%) FOR STRONGER PLANT STRUCTURES
A premium calcium silicate supplement designed to fortify plant structure and improve overall plant health. Derived from high-quality wollastonite, CalSil Boost provides a dual benefit of calcium and silicon, enhancing cell wall strength, increasing resistance to stress, and promoting vigorous growth. Ideal for a wide range of crops,
CalSil Boost ensures your plants receive the essential nutrients they need for peak health and productivity. Key Benefits: - Supplies essential calcium for strong cell walls - Provides silicon to enhance structural integrity - Increases resistance to environmental stresses - Promotes vigorous and healthy plant growth - Improves nutrient uptake and overall soil health
*Application Rates:
Soil Amendment: - For gardens and field applications, use 1/2 cup (100 grams) of CalSil Boost per 10 square feet (1 square meter). - For potting mixes, add 1 tablespoon (15 grams) of CalSil Boost per gallon (4 litres) of soil or media. - Mix thoroughly into the soil or media before planting or top-dress as needed. Composting: - Add 1/4 cup (50 grams) of CalSil Boost per cubic foot (28 litres) of compost material. - Mix well to ensure even distribution.Directions for Use:
Shake well before use.For best results, apply in the early morning or late afternoon when temperatures are cooler. Avoid application during peak sunlight hours to prevent leaf burn. Compatible with most fertilizers and pesticides, always perform a compatibility test before mixing with other products.Safety Information:
Wear gloves and a mask when handling the product to avoid inhalation or skin contact. Store in a cool, dry place, away from direct sunlight. Elevate your gardening experience with Seacliff Organics' CalSil Boost, and provide your plants with the strength and resilience they need to flourish!
RICH IN CALCIUM (35%) AND SILICON (65%) FOR STRONGER PLANT STRUCTURES
A premium calcium silicate supplement designed to fortify plant structure and improve overall plant health. Derived from high-quality wollastonite, CalSil Boost provides a dual benefit of calcium and silicon, enhancing cell wall strength, increasing resistance to stress, and promoting vigorous growth. Ideal for a wide range of crops,
CalSil Boost ensures your plants receive the essential nutrients they need for peak health and productivity. Key Benefits: - Supplies essential calcium for strong cell walls - Provides silicon to enhance structural integrity - Increases resistance to environmental stresses - Promotes vigorous and healthy plant growth - Improves nutrient uptake and overall soil health
*Application Rates:
Soil Amendment: - For gardens and field applications, use 1/2 cup (100 grams) of CalSil Boost per 10 square feet (1 square meter). - For potting mixes, add 1 tablespoon (15 grams) of CalSil Boost per gallon (4 litres) of soil or media. - Mix thoroughly into the soil or media before planting or top-dress as needed. Composting: - Add 1/4 cup (50 grams) of CalSil Boost per cubic foot (28 litres) of compost material. - Mix well to ensure even distribution.Directions for Use:
Shake well before use.For best results, apply in the early morning or late afternoon when temperatures are cooler. Avoid application during peak sunlight hours to prevent leaf burn. Compatible with most fertilizers and pesticides, always perform a compatibility test before mixing with other products.Safety Information:
Wear gloves and a mask when handling the product to avoid inhalation or skin contact. Store in a cool, dry place, away from direct sunlight. Elevate your gardening experience with Seacliff Organics' CalSil Boost, and provide your plants with the strength and resilience they need to flourish!
LIQUID CALCIUM
Micronised Soft Coral and AgLime with Trace Minerals30% Calcium, 0.25% Magnesium
Liquid Calcium is micronised calcium carbonate, combining a 50/50 blend of NZ’s finest limes & a soft golden fossilised seashell and coral lime imported from Australia. It is totally natural and contains not only Calcium and Magnesium but also naturally occurring levels of important trace minerals such as Manganese, Zinc, Copper, Cobalt, Molybdenum and Boron.
Recommended Usage:
Dilute 15- 30ml with 5 litres of water per 10m2Soil drench: apply with a watering canFoliar spray: Keep agitated and use a wide nozzle sprayerCuttings: dip rootsin a 1:4 dilution (Liquid Calcium:Water)The best conditions for application early morning or evening with minimal wind and preferably no rain for at least two hours after application. Liquid Calcium can be applied with most foliar fertilisers. We recommend mixing and applying to a test area first before blanket application if adding another product.
SHAKE WELL.
Caution: Remove fine filters from spray equipment before application. Liquid Calcium is not suitable for a C Dax type handheld or knapsack sprayers. Do not mix until ready to apply. Mix and spread straight away. DO NOT LEAVE STANDING FOR ANY LENGTH OF TIME. This can affect product consistency and further agitation may be required. Thoroughly clean all spray equipment after use.
Handling:
Wear gloves and eye protection, and wash hands after useStorage:
Once opened, keep sealed and stored out of direct sunlightWarning:
If ingested, product comes into contact with eyes or skin irritation is present, rinse area well and call the National Poisons Centre on 0800 POISON (0800 764 766)
SEACLIFF ORGANICS LIVING SOIL IS THE BEST COMPLETE LIVING SOIL MIX ON THE MARKET TODAY*medical cannabis growers please note, the optimal targets for veg and flower are not the same. If you are choosing a “water only” style of growing, please inform us when you order and we will customise the soil with more potassium, we can also add more nitrogen if you are planning to run a longer veg cycle. It is our recommendation to run the soil as it is, adding amino acids for additional nitrogen if required, as well as K-Humate or our specialist Bloom mix in flower. This will ensure top shelf results and maximum yields.
A grow schedule can also be found in our blogs
If you are a more advanced grower and want the absolute best, we full heartedly recommend running bi weekly saturated paste tests to ensure your plant is getting luxury levels of everything it needs throughout the grow cycle. This data will allow you to tune to specific cultivars, optimising costs, yields and quality. Please shoot us an email if you require assistance or prescriptions. For bulk orders please email store@seaclifforganics.nz. We will beat the price of any equivalent product.
This Soil is intended for fragrant and flavoursome crops, and is full of all of the essential nutrients to promote active macrofauna and microfauna.
Our soil is full of NZ sourced natural ingredients that, with the help of a thriving soil food web, will break down over time giving a steady slow release of the essential nutrients to the plant. It is designed to be recycled.
Highest possible quality ingredients expertly blended for the best flavour in your plants!
For best results, do not allow any dry back when watering.
Use 50 liter pots minimum, soil can be recycled over and over with additional amendments and compost.
Blumat irrigation system target = 80-100mbar of moisture.
Amino acids are the recommended source of additional nitrogen(if required)
Ask about heavy metals tests and bulk shipping
After a grow, you can reamend your living soil back to brand new using our Seacliff Organics Replenish Mix. Only 300-600g is needed per 50L, so one bag of our Replenish Mix will recharge your 50L pots up to 8 times!
Ingredients, Sphagnum peat moss, Worm casting, Pumice, Oat husk, Biochar, Ag lime, Oyster shell meal, Gypsum, Colloidal soft rock phosphate, Fish bone meal, Potassium sulfate, Zelp, Acadian kelp, Ultra paramagnetic Andesite, Basalt rock dust, Malted barely, Bio ag ful-humix, Fish meal, Amino acids, Flaxseed meal, Neem meal, Karanja meal, Silica, Yucca extract, BEAM, Trace minerals
REPLENISH MIXRecharge, Re-Amend, DIY Living Soil PackNPK = 1 - 2.4 - 1.5
This pack can be used to build your own Seacliff Organics styled living soil at home. Each pack is weighted to make exactly 50 litres of soil. You can also use it as an amendment pack to recycle your soil again and again with just the addition of a little compost. You can re-amend a 50L pot of our living soil 5 times with this pack!
The product contains everything in the same ratios as our signature living soil, with the exemption of TM7 for the trace minerals as opposed to single source and the removal of andesite, which is not needed while re-amending your soil, you can buy this separately when building soils, although it is not essential!
Amendments: Ag lime, Oyster shell meal, Gypsum, Colloidal soft rock phosphate, Fish bone meal, Potassium sulfate, Zelp, Acadian kelp, Basalt rock dust, Malted barely, Bio ag TM7, Fish meal, Amino acids, Flaxseed meal, Neem meal, Karanja meal, Yucca extract.
You can also use this as a general fertiliser, you will see great results!
Instructions for Use:
To Build Soil 1 pack = 50 litres of soil base mix, for bulk replenish purchase please email store@seaclifforganics.nz. See our blog for details on the soil building process
A professional base mix that allows for luxury calcium and a correct pH balance would look similar to this.
50% peat moss15% worm castings35% pumice (or 30% pumice with 5 percent biochar)If pH is too high, add more peat. Cook for 4 weeks, turn on the second day, and once a week after that. To Re-amend Seacliff Organics Living Soil:
Use 30-60 grams of our re-amendment product to every 5 litres of soil ¾ a cup worm castings or compost and, ¾ of a cup of pumice or oat husks per 5 litres Mix these ingredients with your soil as best you can, either through the entire mix, or till through the first 50 percent.
Top Dressing:
Scuff a handful of nutrients into the first few centimetres of soil
A GENERAL ORGANIC FERT FOR A LITTLE EXTRA BOOST!
SEACLIFF ORGANICS SHED BLEND CAN BE USED ON A WIDE VARIETY OF CROPS, AN EXCELLENT GENERAL FERTILISER. Seacliff Organics Shed Blend is the perfect fertilizer to give your plant an extra boost, growing stronger plants, promoting vigorous growth and more disease-resistant plants with a diverse array of organic matter and minerals that break down slowly over time. Simply topdress with compost (the ideal source of complete biology) and water in, let nature do the rest!
For general garden use, apply 1/4 cup to 1 cup per plant, or 1-3 cups per square metre. This is best used mixed with compost at 1:1 to 1:1.5 and sratched into the first few centimetres of topsoil then mulched for no-till, or it can just be dug through your soil with compost.
Amend potting mix at 3-6 cups per 50 litres
NPK 3.5/3.7/1.9 + 2.6 Sulfur + an abundance of minerals, vitamins, enzymes and natural growth hormones.
Shed Blend Contains:
Acadian kelp meal, Karanja meal, Neem meal, Fish bone meal, Flax seed meal, Fish meal, Langbeinite, 2 row malted barley, Colloidal soft rock phosphate , Ultra paramagnetic Andesite, Gypsum, Oyster shell flower and Amino acids
SEACLIFF SUPER BLOOMMicronised Liquid FormulaNPK = 2 - 12 - 6
We have used ingredients we love in a new and innovative fashion, bringing you a liquid product packed with microbes, bio stimulants and your 16 essential minerals. The aminos, fulvic acid and microbiology will help chelate phosphorus and calcium creating a potent blend, delivering the results you crave without the use of environmentally harmful guanos or chemicals.
Contains: Amino Acids, Potassium Silicate, Chelated Trace Minerals (Biomin v10), Biomin Manganese, Potassium Sulphate, Magnesium Sulphate, Water Soluble Gypsum, Micronised Soft Rock Phosphate, Tri Kelp, Fulvic Acid, Coconut Water Powder, Lactobacillus Plantarium, Lactobacillus Casei, Lactobacillus Fertmentum, Lactobacillus Delbrueckii, Bacillus Subtilis, Saccharomyces Cerevisiae, Rhodopseudomonas Palustris
Living soil application:
1.5-2 teaspoons per 5 litres of water (soil drench or foliar) or 1-2 cups per 200 litres2.5-3.5kg per hectareHandling:
Wear a mask to avoid inhaling particles, open in a well ventilated area.Wear gloves and eye protection, and wash hands after use.Storage:
Once opened, keep sealed and dry.Warning:
If ingested, product comes into contact with eyes or skin irritation is present, rinse area well and call the National Poisons Centre on 0800 POISON (0800 764 766)
