Description
Overview
High-capacity moisture removal. Compact, efficient design.
The Quest 200 50Hz dehumidifier delivers the perfect balance of high-capacity moisture removal and exceptional energy efficiency, making it a smart solution for growers and facility operators needing dependable moisture control in moderate-sized environments. Built for 50Hz regions, this unit excels where space, performance, and energy use must align.
Powered by Quest’s proprietary M‑CoRR Technology, the Quest 200 50Hz dehumidifier delivers superior efficiency, pulling 3.9 L/kWh. Its high efficiency and reduced heat output contribute to operational cost savings. Quality-built with a compact footprint, the Quest 200 is easy to integrate without compromising valuable space or environmental stability.
With this next generation of product, Quest has eliminated the need for a separate hang kit, making installation simpler than ever. Simply insert threaded rod into the built-in lift and hang points for easy installation.
A robust digital control system enables fine-tuned RH setpoints, preventative maintenance notifications, diagnostic feedback, and a dark mode setting to support low-light environments.
Engineered and assembled in the USA, the Quest 200 50Hz is a reliable, space-conscious, high-performance solution for facilities looking to maximize environmental control and operations.
Technical Specifications
Specification
Value
@ 26.7 °C | 60% RH
Water Removal
90 Liters/Day
Efficiency
8.3 Pints/kWh
Energy Factor
3.9 Liters/kWh
Current Draw
4.2 Amps
Power
1,220 Watts
BTU (Total)
11,900
BTU (Heat of Condensation)
8,600
BTU (Motor Load)
3,300
@ 23.9 °C | 50% RH
Water Removal
57.7 Liters/Day
Efficiency
5.8 Pints/kWh
Energy Factor
2.7 Liters/kWh
Current Draw
3.8 Amps
General Specifications
Part Number
4046100-NC
Dehumidifier Type
Refrigerant Dehumidifier
CFM
500
Operating Temperature
13 °C Min–35 °C Max
Supply Voltage
230 V
Unit Dimensions
68cm (L) × 60cm (W) × 53cm (H)
Unit Weight
58.9 kg
Control Type
Onboard digital controls with low voltage terminal block
Air Filter MERV Rating
MERV 13
Air Filter Dimensions
45.7 × 45.7 × 5.1 cm
Recommended Breaker Size (UK)
13 Amp
Recommended Breaker Size (EU, AU, ZA)
10 Amp
Power Cord
3m FEM IEC 60320-C13
Refrigerant Type
R454B
Refrigerant Amount
1,446 g (51 oz)
Drain Port Connection
1.9cm Threaded NPT
Fans
Single Speed Impeller
Here is a great controller for these - https://www.hydrogarden.co.nz/shop/New-Products/Cultiv8-Heating-controller/
The Breezin Hot Rod Heat Bars - Suited for grow tents or glass houses
Are by far the safest and most energy efficient option for those looking to maintain optimal greenhouse/grow room temperatures during our long, cold & unforgiving winters.
The user friendliness and versatility will enable growers to easily hang or mount the heat bars to the walls, floor or even ceiling of their grow/propagation area.
80 wattsHeating area - Upto 1.2M x 1.2M (Can raise temperature by upto 7 degrees)Length 60cmWaterproof Lever IP55 (suitable for humid environment)Works well with any Compatible ThermostatUser Friendly, Energy efficientDurable Steel Shell with Enamel Finish1 Year Warranty PRACTICAL USES INCLUDE:
Propagation tentsLarge Grow tentsGreenhouses/GrowroomsAdditional heat during lights on or lights off ADDITIONAL INFORMATIONThe Heat Bars are compatible with any digital or analogue thermostat (recommended).The IP55 water resistant rating ensures safe use in humid environments and the durable enamel finish ensures fire-safety. They are constructed with a heating element inside an alloy metal tube with a quality enamel finish.Includes mounting bracket for easy installation.Comes with 1 year warranty.
Here is a great controller for these - https://www.hydrogarden.co.nz/shop/New-Products/Cultiv8-Heating-controller/
Grow room heat bar.
Comes with NZ plug, Ready to start keeping your babies warm!
180W / 90CM
Small in size, big in value!
Great for heating 1.2 x 1.2 areas. Can raise temperatures by up to 6 degrees more!!
SlimLine and Safe
Here is a great controller for these - https://www.hydrogarden.co.nz/shop/New-Products/Cultiv8-Heating-controller/
The Breezin Hot Rod Heat Bars - For grow tents or glass houses
Are by far the safest and most energy efficient option for those looking to maintain optimal greenhouse/growroom temperatures during our long, cold & unforgiving winters.
The user friendliness and versatility will enable growers to easily hang or mount the heat bars to the walls, floor or even ceiling of their grow/propagation area.240W – 1200mm length
Increase 5-7°C in 1.2M x 2.4M
Energy Efficient
Safe (no exposed heat elements)Ideal for green houses & grow tents)Versitile & User-friendly (Secure to wall or floor)Durable Steel Shell With Enamel FinishIP55 (suitable for humid environments)Compatible With Most ThermostatsOne Year Warranty PRACTICAL USES INCLUDE:Propagation tentsLarge Grow tentsGreenhouses/GrowroomsAdditional heat during lights on or lights off
ADDITIONAL INFORMATION
The Heat Bars are compatible with any digital or analogue thermostat (recommended).The IP55 water resistant rating ensures safe use in humid environments and the durable enamel finish ensures fire-safety. They are constructed with a heating element inside an alloy metal tube with a quality enamel finish.Includes mounting bracket for easy installation.Comes with 1 year warranty.
Heat mat, or other heating controller
Temperature Calibration
Celsius or Fahrenheit read-out
4.3A max. current
1000 watt max. wattage
Temperature Range 20ºC to 42ºC
Spider Farmer® 5L Cool Mist Humidifier for PlantsIf you notice a low humidity level, it is crucial to take prompt action to improve it. An inadequate amount of moisture in the air can result in a slowdown in growth and reduced efficiency of photosynthesis.
Features
4 Adjustable Mist levelsConstant Humidity ControlCustomizable TimerAdjustable Extension DuctingPrecise Temperature and Humidity Sensors
What's Included?1 x 5L Spider Farmer Dehumidifier1 x Flexible Long Hose2 x Flexible Short Hose1 x 2 Way Nozzle
Spider Farmer® 16L Cool Mist Humidifier for PlantsElevate your cultivation with the 16L Humidifier – delivering efficiency, capacity, and precision for your large-scale planting needs.
Versatile Application:
Tailored for large tent cultivation and commercial plant projects.Ideal for creating the perfect growing environment in both extensive tent setups and commercial cultivation spaces.Impressive Capacity and Precision:
Expandable hose disperses mist to the corner of the tent for thorough coverage.Four adjustable mist levels with a maximum humidification capacity of 1400ML/H.Independent sensor for precise humidity control.Note: Ensure the humidity sensor is NOT placed near the mist outlet for accurate readings.
Spider Farmer® 16L Cool Mist Humidifier FeaturesEnhance the health and vitality of your indoor plants with the Spider Farmer® 16L Cool Mist Humidifier. Designed to create the perfect environment for your botanical friends, this advanced humidifier delivers a fine mist of moisture to help maintain optimal humidity levels.
Key Features:
Efficient Humidification: This humidifier features an extra-large 16-liter capacity water tank with a convenient tick mark window, allowing it to continuously provide a cool mist for all day humidificationCustomizable Humidity Controls: Set the humidity levels anywhere between 35% to 95% to create the perfect environment for your plants' growth and health.Timer Setting: Schedule the timer between 1 to 12 hours for convenient operation according to your specific needs.Adjustable Mist Output: Customize the mist intensity to suit different plant types and environmental conditions. Choose from four mist levels with a maximum output of 1400ml/hour.Easy Refilling and Cleaning: The top-fill design simplifies the refilling process, while the wide opening facilitates thorough cleaning, preventing the buildup of bacteria and mold for a hygienic environment.Automatic Shut-Off: Equipped with a built-in sensor, the humidifier automatically shuts off when the water level is low, providing peace of mind and preventing damage to the unit.Large Wheels, Easy to Move: With its sleek and modern design, the Spider Farmer® 16L Cool Mist Humidifier complements any indoor space, whether it's your living room, bedroom, or greenhouse.
Spider Farmer 32 Pint Dehumidifier
Note These have and EU plug and will require travel adapter. 100 % fine to be used this way
While your grow tent requires a certain level of humidity, excessive humidity can cause serious problems for your plants.
If your grow room has too much moisture, you need a dehumidifier.
Key FeaturesSpecifically Designed for Grow Tents: Perfect fit for grow tent setups, optimizing space and efficiency.High Dehumidification Capacity: 39x more effective than semiconductor models, ensuring optimal humidity control.Energy Efficient: 4x higher energy efficiency ratio, reducing operating costs.Versatile Installation: Can be placed inside or outside the tent, with easy two-step setup.User-Friendly Controls: Features adjustable modes, humidity display, timers, speed control, and security lock.Winter-Ready: Compressor design ensures functionality even in colder temperatures.Easy Maintenance: Simple-to-clean filter and detachable air duct for hassle-free upkeep.Proper Probe & Duct Placement: Ensures accurate readings and effective airflow distribution.
What does a dehumidifier do?
When the air humidity exceeds the ideal range, a dehumidifier removes moisture from the air, reducing the humidity and ensuring your plants remain in an optimal environment. Excessive humidity can lead to bud rot and other molds, and can also slow plant growth.
Why recommend a compressor dehumidifier over a semiconductor dehumidifier?
Compressor dehumidifiers are much more effective than semiconductor dehumidifiers, with a dehumidifying capacity 39 times greater. You may have previously purchased a semiconductor dehumidifier only to find it almost ineffective. This is why we recommend compressor dehumidifiers: they quickly process large volumes of air, provide better dehumidification, and are highly efficient.
A next-gen humidifier designed with smart controls and precision vapours to obtain the optimal humidity levels for plant growth. Contains an innovative EC ultrasonic vaporizer that utilizes digital pulses to reach up to 10 levels of moisture output. This will allow you to finely tune your control of moisture levels in your grow space. The onboard controller features smart humidity and timer programming, which is supported by a corded precision humidity sensor. Its digital display provides active humidity readings and can be toggled to be hidden. Also features a built-in automatic shutoff that protects the system when the water reservoir is depleted. Includes a 4.5L water tank and an extendable tube that can reach over 4 feet in length. This product is part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment.
SMART HUMIDITY CONTROLThis environmental humidifier features an onboard controller that is equipped with smart humidity and timer programming. Digitally set four levels of moisture output which can be increased to 10 levels with a UIS controller. The included corded sensor probe provides quick readings to ensure swift responses to any changes in climate. Connect to UIS controllers to integrate with other grow equipment and access dynamic climate triggers, grow cycles, and schedules. Connect to the app to control your devices from anywhere, as well as unlock advance automations, alerts, climate charts, CSV data export, and more!
DESIGNED FOR GROWERSThis series was designed from the ground up to optimize for grow space environments. The flexible tubing and corded humidity sensor enable the humidifier to be positioned outside the grow tent to save space. This tubing can also extend to reach over 4 feet in length to direct moisture to exact areas of your grow. The backlit display can also be toggled off while the humidifier is operating to prevent disrupting your plant’s light cycle
Designed with smart controls and precision vapors to obtain optimal humidity levels for plant growth.Next-gen EC ultrasonic vaporizer can reach up to 10 levels of humidity for fine-tuned moisture control.Interchangeable nozzle heads included for flexible moisture distribution in one direction or a wide area.Features smart humidity and timer programming, hideable backlit display, and auto-start with backup memory.Connects to UIS controllers for dynamic climate triggers, grow cycles, scheduling, alerts, and app control.
A next-gen humidifier designed with smart controls and precision vapors to obtain the optimal humidity levels for plant growth. Contains an innovative EC ultrasonic vaporizer that utilizes digital pulses to reach up to 10 levels of moisture output. This will allow you to finely tune your control of moisture levels in your grow space. The onboard controller features smart humidity and timer programming, which is supported by a corded precision humidity sensor. Its digital display provides active humidity readings and can be toggled to be hidden. Also features a built-in automatic shutoff that protects the system when the water reservoir is depleted. Includes a 15L water tank, piping, and interchangeable nozzles that distribute moisture in one direction or a wide area. This product is part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment.
SMART HUMIDITY CONTROLThis environmental humidifier features an onboard controller that is equipped with smart humidity and timer programming. Digitally set four levels of moisture output which can be increased to 10 levels with a UIS controller. The included corded sensor probe provides quick readings to ensure swift responses to any changes in climate. Connect to UIS controllers to integrate with other grow equipment and access dynamic climate triggers, grow cycles, and schedules. Connect to the app to control your devices from anywhere, as well as unlock advance automations, alerts, climate charts, CSV data export, and more!
Vivosun AeroDrain D12 Intelligent Environmental DehumidifierSmart Humidity Control for Precision GrowingMaintain ideal conditions in your grow tent with the Vivosun AeroDrain D12 — a compact, intelligent dehumidifier designed to optimise plant health and environmental stability. Built for grow tents up to 1.5 × 1.5 meters (5×5), this unit integrates seamlessly with the Vivosun Smart Grow System, offering remote monitoring and automated adjustments via the Vivosun mobile app.
Effortless Setup & MobilityThe AeroDrain D12 features tool-free installation, with integrated handles and caster wheels for easy placement. Its compact footprint — just 27.5 × 18.5 × 48.2 cm — makes it ideal for tight grow spaces.
High-Efficiency Moisture RemovalPowered by a high-performance compressor, the D12 extracts up to 12 liters of moisture per day, with real-time monitoring of temperature, humidity, and vapor pressure deficit (VPD). It automatically adjusts operation to maintain optimal growing conditions.
Smart App IntegrationTrack and control your environment from anywhere using the Vivosun app. View live data, adjust settings, and receive alerts — all from your phone.
Reliable Operation & Safety Features2-liter water tank with dual drainage optionsAuto shutoff when tank is fullAutomatic restart after power outagesEnergy-efficient at just 120 wattsPerformance by EnvironmentTechnical SpecificationsDimensions: 27.5 × 18.5 × 48.2 cmWeight: 9 kgWater Tank Capacity: 2 LPower Supply: 120 V, 60 Hz / 200–240 V, 50 HzRated Power Consumption: 120 WRefrigerant: R290Operating Range: 5–35°C, 10–99% RH
This is a beast of a humidifier for large grow rooms!
This unit will emit 5.5L per hour, of ultra fine mist. The water molecules produced by this device are between 5 to 10 microns, they evaporate immediately into the air.
Your growing space will not be wet because the fog emitted by the humidifier is dry. The humidity will then increase efficiently and quickly.
For fast plant growth, healthy emanation and nutrient absorption, humidity is an essential factor. For this reason, it is necessary to connect this humidifier to a humidity controller (optional), the device is equipped with a connection for this purpose
The humidifier has no water holding capacity, it is designed to be connected directly to a water supply and has a PVC elbow to allow you to direct the steam outlet in the direction of your choice. It is also equipped with a drain plug, an on/off button and a humidity indicator. In addition, it is mounted on casters for easy movement.
CO² Grow BagsNZ-made CO² Grow bags are designed to naturally increase CO² levels and improve the yield of indoor grow tents and small greenhouses.
Enriching your plants with CO² can increase growth & yield by 20-40% or more.
These bags are perfect for growing plants and microgreens in small, enclosed spaces. All plants benefit from higher CO² levels, resulting in faster, stronger, and more vigorous growth.
Benefits:
Improve plant growth and yieldEasy to useLong-lastingSuitable for small spacesCan be used with a variety of plantsSafe and eco-friendlyCost-effective
Traditionally, commercial greenhouses increase CO² levels using complex systems that burn natural gas. CO² Grow bags offer a safer, cheaper, and more eco-friendly alternative by taking advantage of mushrooms breaking down our locally-sourced carbon matrix and releasing CO² gas.
Sizes:
Large (2.2kg)XL (4.3kg)
A single XL size CO² Grow Bag is designed to cater for a 1200 * 1200 growing space. Grow spaces with dense heavy foliage can easily take multiple bags.
Dual L size CO² Grow Bags match the same size environment.
For larger spaces simply increase the number of bags relative to the size of your growing environment.
Directions for use: Place bag upright on floor of growing environment.Peel off top front sticker to activate – this allows CO² to disperse through white filter patch on the front of the bag.Do not remove white filter patch underneath activation sticker.CO² will be produced 24 hours a day, for up to 6 months once activated.For peak CO² levels, replace bags every 2-3 monthsDO NOT OPEN OR MAKE HOLES IN THE BAG - this will shorten the life of the bag.Be sure to keep CO² bag a safe distance away from lights or heaters.Over time you will see white to light brown growth and liquid form in the bag, this is completely normal and healthy.Bag contents are sterilised, meaning no risk of introducing pests or disease to your growing environment.No maintenance or watering required.
Product Life-cycle
CO² Grow bags will last for approximately 4-6 months as the mushroom mycelium breaks down the carbon-producing mix in the bag. CO² production mostly stops after 8-9 months.
Product Activation begins when you peel off the top sticker on the front of the bag exposing the white filter patch. We recommend you write the date you do so on the back of the bag - so you can refer to it when working out when to replace your bags.
Once the bags have done their dash the contents can be easily composted.
Guarantees
CO² Grow Bags are replacement guaranteed for 30 days.
The Manufacturing Production Date of your CO² Grow Bag is found on the sticker on the back of the bag - guaranteeing a fresh bag every time.
Further Info
For further information read the CO² Grow FAQ Here. (www.co2grow.co.nz/faq)
CO² Grow BagsNZ-made CO² Grow bags are designed to naturally increase CO² levels and improve the yield of indoor grow tents and small greenhouses.
Enriching your plants with CO² can increase growth & yield by 20-40% or more.
These bags are perfect for growing plants and microgreens in small, enclosed spaces. All plants benefit from higher CO² levels, resulting in faster, stronger, and more vigorous growth.
Benefits:
Improve plant growth and yieldEasy to useLong-lastingSuitable for small spacesCan be used with a variety of plantsSafe and eco-friendlyCost-effective
Traditionally, commercial greenhouses increase CO² levels using complex systems that burn natural gas. CO² Grow bags offer a safer, cheaper, and more eco-friendly alternative by taking advantage of mushrooms breaking down our locally-sourced carbon matrix and releasing CO² gas.
Sizes:
Large (2.2kg)XL (4.3kg)
A single XL size CO² Grow Bag is designed to cater for a 1200 * 1200 growing space. Grow spaces with dense heavy foliage can easily take multiple bags.
Dual L size CO² Grow Bags match the same size environment.
For larger spaces simply increase the number of bags relative to the size of your growing environment.
Directions for use: Place bag upright on floor of growing environment.Peel off top front sticker to activate – this allows CO² to disperse through white filter patch on the front of the bag.Do not remove white filter patch underneath activation sticker.CO² will be produced 24 hours a day, for up to 6 months once activated.For peak CO² levels, replace bags every 2-3 monthsDO NOT OPEN OR MAKE HOLES IN THE BAG - this will shorten the life of the bag.Be sure to keep CO² bag a safe distance away from lights or heaters.Over time you will see white to light brown growth and liquid form in the bag, this is completely normal and healthy.Bag contents are sterilised, meaning no risk of introducing pests or disease to your growing environment.No maintenance or watering required.
Product Life-cycle
CO² Grow bags will last for approximately 4-6 months as the mushroom mycelium breaks down the carbon-producing mix in the bag. CO² production mostly stops after 8-9 months.
Product Activation begins when you peel off the top sticker on the front of the bag exposing the white filter patch. We recommend you write the date you do so on the back of the bag - so you can refer to it when working out when to replace your bags.
Once the bags have done their dash the contents can be easily composted.
Guarantees
CO² Grow Bags are replacement guaranteed for 30 days.
The Manufacturing Production Date of your CO² Grow Bag is found on the sticker on the back of the bag - guaranteeing a fresh bag every time.
Further Info
For further information read the CO² Grow FAQ Here. (www.co2grow.co.nz/faq)
An affordable meter that provides scientifically accurate Photosynthetic Active Radiation (PAR) light readings under any light source including LED!
PROVIDES ACCURATE PAR LIGHT READINGS FROM ANY LIGHT SOURCE:– Full sun to full shade indoors or outdoors.– Artificial light sources (LED, High Pressure Sodium, Metal Halide,Florescent, Halogen…).
THREE MODES OF OPERATION:– Instant Spot Measurement mode for PAR light readings.– Scan mode for quickly averaging PAR over an area.
COMPACT AND EASY TO USE.
WATER AND IMPACT RESISTANT.
INTEGRAL MOUNTING PLATE FOR: STAND, STAKE, LANYARD & HANGER HOLE, AND MAGNET MOUNTS.
1/4-20 THREADED HOLE FOR MOUNTING ON CAMERA TRIPODS AND STANDS.
INCLUDES A SENSOR COVER AND SOFT CARRYING CASE
Main Features
Wifi control: INKBIRD IHC-200-WIFI can be connected to our mobile phones via its free APP and we can monitor, set and/or adjust the humidity on our mobile phones at any time, no time to be wasted for making frequent checking, more efficient, and convenient. (WiFi supported: ONLY SUPPORTS 2.4GHz Wi-Fi (Support IEEE 802.11b/g/n)
Switch modes automatically: INKBIRD IHC-200-WIFI supports humidification and dehumidification modes and switches between the two modes automatically, easy and convenient for humidity controlling and monitoring.
Alarms for safer: the alarm of INKBIRD IHC-200-WIFI will be triggered once the detected humidity exceeds the set values or its limit value or once the sensor occurs faulty performance and the alarm can be turned off by pressing any physical button of the device or can be turned off on our mobile phones. It will be much safer and more efficient for application contexts.Range and accuracy: its humidity measuring range is 10 ~ 99% with its relative humidity accuracy of ± 3% RH ~ ± 5% RH.
Humidity calibration: INKBIRD IHC-200-WIFI supports humidity calibration for more accurate measurement and control based on our practical application contexts.
Delay protection: it is equipped with delay protection for its control output which can offer more protection for the device and the monitored objects as well.
INKBIRD ITC-308-WIFI is a wireless temperature controller via WIFI connection with temperature calibration, the independent setting for refrigeration and heating, over temperature protection, and an automatic temperature control system for more accurate temperature control, which can be widely used for most applications such as homebrew, aquarium, pet breeding, incubation, terrestrial heating, fermentation and etc.
40W Ozone Generator, 1000mg Per Hour
Ozone is a naturally occurring molecule to remove odours and pathogens from the air. Eliminate those unwanted smells, freshen the air and also kill air-borne pathogens.Used in the outlet ducting it will mix and destroy odour. Used in the grow room itself it will help prevent fungus issues and botyritis (over exposure to plants can be more harmful to plants!)
Can be used to remove odour from room or cars (plant material, dog smell, mould from leaks)
Avoid the area when Ozone is being produced. It has a distinctive smell almost electrical in smell. Too much exposure can damage humans, pets, and even plants. Always evacuate the area, and ventilate until the Ozone has dissipated. Ozone is unstable and will become oxygen again given time. In extreme situations, high levels of Ozone can damage rubber and plastic. Please do not use this unit in a 24/7 situation. Like any tool, it shouldn't be misused. Regular smaller concentrations usually do a better job than large concentrations.
The Pro-Leaf Multi-Function Environmental Controller, BECC-B2, offers full control of the indoor garden environmental, with four 240-volt receptacles for cooling, humidity, Co2 and heating devices. This advanced unit precisely monitors and manages co2 in a range of 400-2000 parts per million with an adjustable deadband. Featuring fuzzy-logic technology to provide even greater control in compressed co2 setups. The BECC-B2 regulates tempberature in a control range of 5-50 degrees centigrade, and relative humidity in a range of 5-95 percent, both with adjustable deadbands. Photocell control allows for separate day and night settings of temperature and humidity. The BECC-B2 includes a remote sensor on a 4.5m cable with integrated photocell.
Precise Temperature, Humidity and CO2 ppm Level Control.
Real Time Digital displays.
Controls up to four devices Cooling-Heating-Humidity-CO2.
Seperate Day & Night Temp set points.
Fuzzy Logic ppm up & down control modes.
High & Low Temp protection.
Accurate amphenol CO2 Sensor with Calibration function.
Humidify & Dehumidify modes.
CO2 Range 400 to 2000ppm accurate within +/-100ppm.
TrolMaster CO2 PPM Digital Controller Beta-8
The BETA-8 CO2 controller provides a precision NDIR sensor/controller in an affordable, user-friendly design. It includes a high-quality remote CO2 sensor with a 16ft cable and a built-in photocell that automatically activates your supplemental CO2 system to maintain CO2 PPM levels only during daylight hours. The BETA-8 features adjustable deadband and min-max recall, along with a ‘fuzzy-logic’ capability for more accurate control of compressed CO2 systems. The CO2 sensor is easily re-calibrated and is designed to maintain accuracy for many years.
THE GREEN PAD JR
NOW CHECK OUT THE GREEN PAD JR. for Your Cuttings!
CO2 accelerates the natural rooting process for cuttings and seedlings so they can establish healthy roots and more nodes by feeding the leaves.
THE GREEN PAD JR gives you higher strike rates, less leaf yellowing, faster rooting by 2-3 days or more allowing you to move healthy rooted cuttings and seedlings to veg faster.
THE GREEN PAD JR is placed in the humidity dome and replaced every other day until you are fully rooted or when you remove the dome. Its that easy!
Very inexpensive to have on-hand and if you don't use them immediately, they'll be good to go when you need them for up to a year. Make sure to keep the remaining GREEN PAD JR’s dry in original packaging and they will last over a year.
THE GREEN PAD
THE GREEN PAD is an innovative product designed to increase levels of carbon dioxide in your indoor garden,and propagation domes, absorbing your gardens humidity to power its CO2 generating reactions. Using a unique natural combination of carbons and acids that react to humidity to begin a measured release of CO2 THE GREEN PADS, when kept dry in their original packaging, will last well over a year. This allows you to use them only when you need them. THE GREEN PADS are easy to use eachOriginal GREEN PAD is effective in an area of 200 to 400 cubic feet.And the new Grand Daddy Pad is used in an area of 800+ cubic feet Adding more GREEN PADS will certainly increase your PPM levels even higher.
When it comes to supplementing your garden with CO2 THE GREEN PAD may be one of the most inexpensive and innovative ways to get the good gas to your plants. CO2 equipment can get expensive and The Green Pads were designed to produce enough CO2 to be of significant benefit to the indoor home garden without the upfront expense of equipment but with similar results.
THE GREEN PAD is a sheet/pad type material laminated with layers of natural carbons and acids that hangs inside your grow room, tent or garden and absorbs the rooms humidity (35%+) to power its reactions, releasing carbon dioxide. If you add periodic water misting, it will accelerate that activation.
Each full sized GREEN PAD lasts about 2 weeks, they peak at the end of the first week, and new Green Pad’s get rotated in weekly
To maintain higher PPM’s you would want to use 1-2 GREEN PADS per 200 to 400 cubic feet of space. Of course adding more of THE GREEN PADS will certainly increase your PPM’s too. You may add or subtract as many GP’s as you need for your specific area.
FOR ALL YOU CURRENT GROWER USING CO2 TANKS: Don’t Get Yourself in a Situation Where You’ve Run Out of CO2!
THE GREEN PAD is your backup for those using CO2 tanks that run empty. Keep an extra pack on hand for emergencies or when you can’t get out to get a tank refill.
You can open THE GREEN PADS and use them when they need them, in the original package. They will last at least a year. Don’t get caught with a garden where you have depleted CO2 that your plants have become accustomed to. Drop a few GREEN PADS in the meantime!
Description
Grow room monitoring. Anytime. Anywhere.
Improve your grow with remote monitoring of temperature, RH, light, and VPD, custom alert, and integrated journaling.
Monitor your garden’s conditions from anywhere. Set alerts that notify you when something goes wrong.
Increase yields and reduce waste. Understand the impacts your actions have on your grow room’s environment.
Temperature – Your plants need consistent temperature for maximum yields.
Humidity – Ideal RH promotes the absorption of nutrients and plant health.
VPD – Maintain the correct VPD for optimal nutrient uptake.
Light – Ensure that your daylight hours match your stage of growth.
Dew Point – Dew point is the key to avoiding condensation and preventing mould.
Connectivity Issues
Power Outages
The ultimate grow room monitor. Pulse Pro is the big brother of the Pulse One, including all of the same features plus these additional sensors & hardware:CO2 data: Dual-channel NDIR, ±(50ppm + 3%MV)PPFD/PAR: Measures the total number of photons within the PAR region specific to plant growth (11 channels, 350nm to 1000nm)Spectrum & color analysis: Measures your light's color spectrum outputLight flicker frequency: Detect unwanted voltage changes and assess ballast & bulb healthLithium-ion rechargeable battery: Allows for wireless, handheld operation while taking PPFD measurements & ongoing data logging during power outages
Included features remotely accessible via the Pulse app (PC, iOS, Android):🌠Unlimited number of sensors & live data, including multiple locations & WiFi networks viewable on one dashboard📡 Instant, reliable alerts customizable to each zone📋 Easily adjust alert profiles on multiple devices with the template manager📊 Day & night averages for any selected time periodâš¡ Connectivity & power outage notificationsâ˜ï¸ VPD-LST offset calibration for accurate VPD data📓 Garden calendar & journal
Contact us to secure yourself a unit and also get exact shipping quote! These are very sought after and is best to pre order
Quest 100 Overview
Capacity 100 Pints/Day
Efficiency 7.5 Pints/kWh
Supply Voltage 110-120V, 60 Hz
Current Draw 5 Amps
Re-engineered with a more environmentally friendly refrigerant, R454B, the Quest 100 combines efficiency and sustainability with the versatility and flexibility of its compact footprint. This makes it the perfect dehumidifier for small projects and spaces.
M-CoRR TechnologyThis patented multi-coil design provides the highest efficiencies available on the market, saving energy and dollars.
In addition to our industry-leading coil system, the Quest 100 features premium MERV-13 filtration without compromising capacity or efficiency. This superior filtration helps to prevent the start or spread of bacteria, mold, or other contaminants around your precious plants, equipment, and crew with 65% more effectiveness than MERV-8 and 20% more effectiveness than MERV-11. MERV-13 filtration means healthier air and more control over your environment.
With a corrosion-resistant base and smaller footprint, the Quest 100 has flexible placement options, with less worry of rust, even after watering your plants or washing down your room.
The BETA-8 CO2 controller offers a precision CO2 NDIR sensor / controller in an affordable easy-to-use package. The BETA-8 features a high-quality remote CO2 sensor (with 16ft cable) and built-in photocell to automatically activate your supplemental CO2 system to maintain CO2 PPM levels only during daylight hours. The BETA-8 also has adjustable deadband and min-max recall. It also has a ‘fuzzy-logic’ feature which will more accurately control compressed CO2 systems.The CO2 sensor can be easily re-calibrated and will continue to operate accurately for many years.
For use with Co2 generators or compressed Co2
Ultrasonic humidifier with 4.5 litre volume
Please note, there is a light on this unit that is on while the unit is running. The will tamper with your lights off cycle
This type of humidifier atomises the water with ultrasound. This is a quiet and very effective method of maintaining humidity in your growing space. With the relatively large water reservoir of 4.5 litres, you can easily last for a few days, depending on the set desired humidity.
Details
Upto 64 hours of operating time with full tankWater tank of 4.5 litresIncreases the relative humidity in the grow roomAccelerates the growth rate of cuttings, seedlings and vegetive plants
Co2 Regulator & Solenoid Set
Comes Wired with NZ/Aus Plug
40mm high pressure gauge 0-4000psi
Flowmeter: 0-15 scfh
Standard Co2 bottle Inlet connection
Hose tail suits 4.2 mm inside diameter hose, you can use either 4mm Air line or 4mm soft tube
230v NZ standard plug solenoid valve
Co2 commonly known as Carbon Dioxide is in the air you’re breathing right now.
The amount of Co2 in the air we breath is approximately 300-400 ppm which works out to be about 0.03-0.04% You can get great benefits from adding more Co2 to your grow room, most species of plants will benefit from an increase in Co2 to 1200-1500 PPM which is 0.12-0.15% Co2 content in the grow room air.
All plants do need Co2 as part of the process of making energy from light via photosynthesis, without sufficient Co2 your plants will suffer
Increasing the Co2 levels allows your plants to use more of the available light, which results in increased photosynthesis. Your plants will produce more energy from the same amount of light when extra Co2 is used. In return you will notice faster more vigorous growth resulting in a bigger and better overall yield
Dial in you environment with the Humidifier and controller combo!
Humidifier
23L
Manual fill or use the pipe with float valve to connect to water.Power: 110WMist: 1200ml/hour
Controller
Humidity Controller IHC-200 INKBIRD IHC-200 is an out-of-box humidity controller, which can control those humidifiers, dehumidifiers and/or fans which voltages range from 100 to 265. It is widely used for mushroom, mini greenhouse, ventilator fan, crawl space, turtle enclosure, curing chamber, snake cage, tobacco cage and etc.
Switch modes automatically: INKBIRD IHC-200 supports humidification and dehumidification modes and switches between the two modes automatically, easy and convenient for humidity controlling and monitoring.
Alarms for safer: the alarm of INKBIRD IHC-200 will be triggered once the detected humidity exceeds the set values or its limit value or once the sensor occurs faulty performance. It will be much safer and more efficient for application contexts.
Range and accuracy: its humidity measuring range is 5~99.99%RH with its control range of 5~99%RH and its accuracy of ±3%RH.
Humidity calibration: INKBIRD IHC-200 supports humidity calibration for more accurate measurement and controlling based on our practical application contexts.
Delay protection: it is equipped with delay protection for its control output which can offer more protection for the device and the monitored objects as well.
Humidity query: INKBIRD IHC-200 offers current humidity query and we can have real time humidity monitoring and controlling and do be better for our monitored objects.
A smart sensor designed to give accurate temp, humidity, and VPD updates to maintain the ideal environment.
Corded probe provides accurate, fast-refresh readings and daily highs and lows of spot, remote locations.
Connect to our app via Bluetooth for remote climate monitoring, alarms, data graphs, and CSV charts.
Backlit LCD screen with desktop, wall, or magnetic mounting options to place and display anywhere.
Fit for use in many home and grow settings like greenhouses, grow tents, guitar rooms, and basements.
A smart hygrometer designed to provide accurate temperature, humidity, and VPD readings to help you maintain the ideal environment for your room. Tracking VPD (vapor pressure deficit) allows you to monitor ambient temperature, relative humidity, and plant leaf temperature, which provides more precise data than if you followed temperature and humidity alone. This model utilizes our steel thermalloy probe to accurately measure climate conditions and generate daily high and low readings of spot locations. Its digital LCD screen can produce a backlight that can display information in darker settings. So whether you are wall hanging, magnet mounting, or desktop placing the temperature sensor, you will be able to quickly inspect your space to react to sudden changes.
Advance ConnectivityConnect to the AC Infinity app for access to greater control of this smart hygrometer. This includes remote climate readings, trigger alarm programming, plus calibrations of temperature, humidity, and VPD readings. You can also receive custom push notifications on your smart device for rapid response to sharp peaks and dips. See historical climate data graphs to track trends and export as a CSV spreadsheet for further analysis.
ApplicationsThis smart indoor thermometer for home is fit for use as a grow room thermostat or nursery temperature monitor. Also fit in other grow settings like greenhouses, grow tents, and closet builds. The Bluetooth temperature, humidity, and VPD gauge can also be used for animal comfort in reptile terrariums or chicken coops. Other home uses include apartments, basements, and guitar rooms where humidity must be kept to a minimum.
The Baldr Wireless Thermometer/Hygrometer means you can moniter your rooms temperature and humidity, from the comfort of your couch, bed or anywhere within 100M of your sensor
Indoor and outdoor temperature display thermometer
Indoor and outdoor humidity display hygrometer
Indoor temperature range: -9.9~+59.9 C; outdoor temperature range:-39.9~+69.9 C
Temperature accuracy +/-1.5 C under working temperature 0-50 C, resolution 0.1 C
Relative humidity range: 20%~95%, resolution 1%
Records max/min temperature and humidity (indoor and outdoor)
Comfort level indicator
Low battery indicator
Time display in 12 / 24 hour
White backlight will light for a few seconds after you press light button on top
Position Method: table standing or wall hanging
Main unit: powered by 3 x AAA batteries (not included)
Remote Sensor: powered by 2 x AAA batteries (not included)
CO2 GENERATOR 4 Burner
CO2 Generators convert liquid propane into supplemental carbon dioxide for accelerated growth. The Pro-Leaf featurefour brass burners, with included burner, plugs allowing CO2 output modification. A full range of safety features ensure reliable operation- electronic ignition replaces an open pilot flame, a solenoid valve to restrict gas if the burners do not ignite, and a tip-over switch which cuts power if the unit is not upright. Integrated LEDs indicate operational status. Each model comes complete with a gas regulator, 3.66m hose, power adapter, and hanging hardware.
Kit Contains
Gas regulator3.66m hoseHanging hardwareMetal feed24V power adapter4kW: 90m2 coverage 10kW: 220m2 coverageRuns on liquid propane gas (LPG) or Natural Gas (NG)Can modify CO2 output
Records maximum and minimum temperature readings from the unit (indoor) and also from the probe (outdoor). The probe can be placed at the top of your plants canopy. Records humidity and the high and lows from the unit.
Requires 2 x AAA batteries.
Green backlight also with a time and alarm feature.
