Description
Overview
High-capacity moisture removal. Compact, efficient design.
The Quest 200 50Hz dehumidifier delivers the perfect balance of high-capacity moisture removal and exceptional energy efficiency, making it a smart solution for growers and facility operators needing dependable moisture control in moderate-sized environments. Built for 50Hz regions, this unit excels where space, performance, and energy use must align.
Powered by Quest’s proprietary M‑CoRR Technology, the Quest 200 50Hz dehumidifier delivers superior efficiency, pulling 3.9 L/kWh. Its high efficiency and reduced heat output contribute to operational cost savings. Quality-built with a compact footprint, the Quest 200 is easy to integrate without compromising valuable space or environmental stability.
With this next generation of product, Quest has eliminated the need for a separate hang kit, making installation simpler than ever. Simply insert threaded rod into the built-in lift and hang points for easy installation.
A robust digital control system enables fine-tuned RH setpoints, preventative maintenance notifications, diagnostic feedback, and a dark mode setting to support low-light environments.
Engineered and assembled in the USA, the Quest 200 50Hz is a reliable, space-conscious, high-performance solution for facilities looking to maximize environmental control and operations.
Technical Specifications
Specification
Value
@ 26.7 °C | 60% RH
Water Removal
90 Liters/Day
Efficiency
8.3 Pints/kWh
Energy Factor
3.9 Liters/kWh
Current Draw
4.2 Amps
Power
1,220 Watts
BTU (Total)
11,900
BTU (Heat of Condensation)
8,600
BTU (Motor Load)
3,300
@ 23.9 °C | 50% RH
Water Removal
57.7 Liters/Day
Efficiency
5.8 Pints/kWh
Energy Factor
2.7 Liters/kWh
Current Draw
3.8 Amps
General Specifications
Part Number
4046100-NC
Dehumidifier Type
Refrigerant Dehumidifier
CFM
500
Operating Temperature
13 °C Min–35 °C Max
Supply Voltage
230 V
Unit Dimensions
68cm (L) × 60cm (W) × 53cm (H)
Unit Weight
58.9 kg
Control Type
Onboard digital controls with low voltage terminal block
Air Filter MERV Rating
MERV 13
Air Filter Dimensions
45.7 × 45.7 × 5.1 cm
Recommended Breaker Size (UK)
13 Amp
Recommended Breaker Size (EU, AU, ZA)
10 Amp
Power Cord
3m FEM IEC 60320-C13
Refrigerant Type
R454B
Refrigerant Amount
1,446 g (51 oz)
Drain Port Connection
1.9cm Threaded NPT
Fans
Single Speed Impeller
The React DH-150 is heavy duty, industrial capacity dehumidifier. Capable of pulling 150 pints (approx. 71 liters) of moisture per day, it is widely used for commercial greenhouses, grow rooms, warehouses, and storage applications.
DH-150 adopts efficient natural drainage technology, which can quickly reduce the humidity in the greenhouse to the ideal level. Here are the key features of this dehumidifier:
1. Efficient dehumidification capacity: The dehumidification capacity of this dehumidifier is as high as 150 pints per day, which can quickly reduce the humidity in the greenhouse and maintain an ideal level.
2. Suspended ceiling style: The dehumidifier adopts a suspended ceiling design, which is easy to install, takes up little space, and does not affect other activities in the greenhouse.
3. Automatic control: The dehumidifier can automatically adjust the humidity according to the humidity value you set to maintain the stability of the humidity in the greenhouse.
4. High efficiency and energy saving: The dehumidifier adopts energy-saving technology to reduce energy consumption and operating costs.
5. Safe and reliable: The dehumidifier is made of high-quality materials with excellent durability and safety performance.
Suspended ceiling natural drainage dehumidifier suitable for 150 pints a day, especially suitable for humidity control in large sheds in the US market. It can be used in plantations, orchards, agricultural facilities, industrial plants and more to help maintain air quality and environmental stability.
SPECIFICATIONS
Model
DH-150
Dehumidification capacity（AHAM）
150Pints
Dehumidification capacity (30℃/80%RH)
252Pints
Circulation air volume
1200m³/h
Rated power
1600W
Power supply
208-230V~50-60Hz
Machine size
940*435*530mm
Machine weight
50KG
Working environment
5-45℃ / 41-113℉
Filter level
MERV-13 F7
AMPS
7.3A
Noise
45dB
The REACT DH-335 (typically categorized as the DH-335B or DH-335C) is a heavy duty commercial dehumidifier. Designed specifically for greenhouses, grow rooms, and large commercial spaces, it boasts a massive moisture extraction capacity of up to 350 pints (166 liters) per day.
Heavy-Duty Moisture Control: Engineered to handle the high transpiration and evaporation rates found in indoor grow operations and commercial agriculture.
Suspended Installation: Can be mounted to ceilings or overhead, saving valuable floor space while providing continuous, natural-drain humidity removal.
Model
DH-335B
Dehumidification capacity（AHAM）
350Pints
Dehumidification capacity (30℃/80%RH)
580Pints
Circulation air volume
2600m³/h
Rated power
1565W
Power supply
208-230V~50-60Hz / 277V~60Hz
Machine size
36.4"L*24.6"W*23.6"H (925*625*600mm)
Machine weight
85KG
Working environment
5-45℃ / 41-113℉
Filter level
MERV-13 F7
Efficiency
9.3 Pints/Kwh
Energy Factor
4.3L/Kwh
AMPS
6.9A
Noise
50-55dB
Form of control
Digital display (86 control box)
Fan type
Backward inclined centrifugal fan
Heat exchanger (two devices) form
High-efficiency copper tube sleeve aluminum fin
Drainage method
Straight row (inner wire G1/2 drain port)
DH-335B adopts efficient natural drainage technology, which can quickly reduce the humidity in the greenhouse to the ideal level. Here are the key features of this dehumidifier:
1. Efficient dehumidification capacity: The dehumidification capacity of this dehumidifier is as high as 350 pints per day, which can quickly reduce the humidity in the greenhouse and maintain an ideal level.
2. Suspended ceiling style: The dehumidifier adopts a suspended ceiling design, which is easy to install, takes up little space, and does not affect other activities in the greenhouse.
3. Automatic control: The dehumidifier can automatically adjust the humidity according to the humidity value you set to maintain the stability of the humidity in the greenhouse.
4. High efficiency and energy saving: The dehumidifier adopts energy-saving technology to reduce energy consumption and operating costs.
5. Safe and reliable: The dehumidifier is made of high-quality materials with excellent durability and safety performance.
Suspended ceiling natural drainage dehumidifier suitable for 350 pints a day, especially suitable for humidity control in large sheds in the US market. It can be used in plantations, orchards, agricultural facilities, industrial plants and more to help maintain air quality and environmental stability.
Spider Farmer® 5L Cool Mist Humidifier for PlantsIf you notice a low humidity level, it is crucial to take prompt action to improve it. An inadequate amount of moisture in the air can result in a slowdown in growth and reduced efficiency of photosynthesis.
Features
4 Adjustable Mist levelsConstant Humidity ControlCustomizable TimerAdjustable Extension DuctingPrecise Temperature and Humidity Sensors
What's Included?1 x 5L Spider Farmer Dehumidifier1 x Flexible Long Hose2 x Flexible Short Hose1 x 2 Way Nozzle
An affordable meter that provides scientifically accurate Photosynthetic Active Radiation (PAR) light readings under any light source including LED!
PROVIDES ACCURATE PAR LIGHT READINGS FROM ANY LIGHT SOURCE:– Full sun to full shade indoors or outdoors.– Artificial light sources (LED, High Pressure Sodium, Metal Halide,Florescent, Halogen…).
THREE MODES OF OPERATION:– Instant Spot Measurement mode for PAR light readings.– Scan mode for quickly averaging PAR over an area.
COMPACT AND EASY TO USE.
WATER AND IMPACT RESISTANT.
INTEGRAL MOUNTING PLATE FOR: STAND, STAKE, LANYARD & HANGER HOLE, AND MAGNET MOUNTS.
1/4-20 THREADED HOLE FOR MOUNTING ON CAMERA TRIPODS AND STANDS.
INCLUDES A SENSOR COVER AND SOFT CARRYING CASE
The Ez-Pz Runoff Pump Kit contains a powerful, durable, oil-free pump that is capable of being used by both home growers and commercial cultivators. Designed to help cultivators capture runoff and also help redirect it to one central drain system. With a 2" automatic built-in Float Valve, the Ez-Pz Runoff Pump Kit wastes no electricity and will turn on and off once the water level in the container has reached 2" in height. Automate your drainage system to save time and money!
Harness the power, with a massive light output, usable photon efficacy and exceptional canopy uniformity, our GL1000W+ will elevate your grow to the next level. The ultimate in cutting-edge, grow light technology and innovation, this 10 bar fixture with detachable bars, offers unbeatable performance and affordability.
Please Note dimmers are sold Separately
One Treegers Precise T Dimmer can control 50 LED fixtures, without voltage drops and at maximum stability
https://www.hydrogarden.co.nz/shop/LightingReflection/Treggers-LEDs/Treegers-Precise-T-Dimmer-0-10V/
Technology & DesignInnovative and revolutionary multi-linear design, with ten magnetic easy-click, detachable, high powered LED Bars. Quality, high performance LED diodes with industry leading LED drivers, provide the ultimate in performance and reliability. High grade heat sinks and optimal passive cooling throughout fixtures, ensures the extended lifespan of all components, preventing premature diode decay.
UsablePhoton EfficacyExtremely high light output of 3090 μmol/s with fixture efficacy of up to 3.1 μmol/J, utilizing diodes with an efficacy of up to 4.35 μmol/J. Treegers LED fixture technology offers remarkable usable efficacy across each point of the lights footprint/coverage area.
UniformityBy using a combination of strategically placed LED diodes and optical lenses, our unique hybrid designs provide market leading uniformity, distributing light evenly across the whole canopy/coverage area.
ModularityOur GL+ LED fixtures feature an ingenious modular design. With easy-click magnetic LED bars, with streamlined frame assembly and remote driver option. Flexibility, upgradability, servicing and maintenance couldn't be easier, reducing downtime and simplifying operations.
IP66 & Smooth Resin CoatingTreegers LED fixtures are rated at IP66. Meaning full protection against high pressure water jets (12.5mm) and total dust ingress. Utilizing innovative silicone resin protection on all diodes and watertight connections on all cables. Our unique coating, besides providing optimal protection for all LED bars, also ensures a smooth surface, with reduced stickiness making it very easy to clean.
Product Code: TGL0004
EAN/GTIN: 9309001188061
Power Consumption: 1000W ±5%
Light Output PPF: 3090 μmol/s
Fixture Efficacy: 3.1 μmol/J
Diodes Efficacy: Up to 4.35 μmol/J
Coverage Area: Minimum 1.2x1.5m up to Maximum 1.5x1.8 m
Thermal Management: Passive Cooling
Input Voltage: 180-277V, 50/60 Hz
Ingress Protection: IP66
LED Bars Lifetime: +60 000Hrs
Dimming: 0-10-20-30-40-50-60-70-80-90-100% (w/ Treegers Precise T Dimmer 0-10V)
External Control: w/ Treegers Growcast or any Universal Controller
Light Distribution: 120º
Fixture Dimensions: 1442x1090x100 mm
Fixture Weight: 13.50 Kg
Carton Dimensions: 1170x440x157 mm
Gross Weight: 16.80 Kg
Certifications: CE, UKCA, RCM, RoHS, SAA
Warranty: 5 Years
Spectrum: Full-Spectrum HybridF+
This compact powerhouse has outstanding uniformity and fixture efficacy. Experience unparalleled plant growth with our IP66 rated, full-spectrum GL300W LED grow light. Perfect for an area of up to 1.0 x 1.0m
One Treegers Precise T Dimmer can control 50 LED fixtures, without voltage drops and at maximum stability
https://www.hydrogarden.co.nz/shop/LightingReflection/Treggers-LEDs/Treegers-Precise-T-Dimmer-0-10V/
Technology & DesignInnovative and revolutionary multi-linear plug & play design four bar LED. Quality, high performance LED diodes with industry leading LED drivers, provide the ultimate in performance and reliability. High grade heat sinks and optimal passive cooling throughout fixtures, ensures the extended lifespan of all components, preventing premature diode decay.
Usable Photon EfficacyVery high light output of 825 μmol/s PPF with fixture efficacy of up to 2.8 μmol/J, utilizing diodes with an efficacy of up to 4.2 μmol/J. Treegers LED fixture technology offers remarkable usable efficacy across each point of the lights footprint/coverage area.
UniformityBy using a combination of strategically placed LED diodes and optional optical lenses, our unique hybrid designs provide market leading uniformity, distributing light evenly across the whole canopy/coverage area.
IP66 & Smooth Resin CoatingTreegers LED fixtures are rated at IP66. Meaning full protection against high pressure water jets (12.5mm) and total dust ingress. Utilizing innovative silicone resin protection on all diodes and watertight connections on all cables. Our unique coating, besides providing optimal protection for all LED bars, also ensures a smooth surface, with reduced stickiness making it very easy to clean.
Horticultural Lighting Controller
Treegers Growcast is a next generation lighting controller. Exclusively designed by Telos, the Treegers Growcast can control up to 50 grow lights. Wih the Telos app, users can set on/off times, sunrise/sunset and PPFD levels with ease.
Healthy PlantsOn/Off, Sunrise and Sunset,precise PPFD dimming
Peace of MindSecure Bluetooth connection (no wifi needed)
Fast InstallPlug and Play,Compatible with Many Grow Lights from Major Manufacturers
Reduce Your CostsOne Growcast controls up to 50 Lights
Product Code: TGC0001
Connection Interface: LLT Connector + RJ11 and linking adaptors
User Interface: Smart-phone app or manual control via touch sensor
Dimming Range: 10-100% & Dim to off
Dimming Protocol: 1-10v or PWM
Input Power: USB-C cable or 12v supply (From LED driver)
Wireless Technology: Bluetooth Mesh version 5.3
Control App: Telos Mesh
App Availability: Android and iOS
Ingress Protection: IP66
Dimensions: 32 x 32 x 22mm
Weight: 80g
Cable Length: 250mm
Warranty: 2 years
AC Remote Station （ARS-1）
The ARS-1 mini-split air conditioner controller is a unique product that solves the age-old problem of having separate day and night temperature settings on your mini-split air conditioners. The ARS-1 is a universal controller that works with most mini-split air conditioners (and some window-type AC units too), as long as the unit came with an IR / infrared remote controller. We use the remote control that came with the unit to “teach” those IR signals to the ARS-1 module. Once the ARS-1 “learns” those remote control codes, the ARS-1 will send those same signals to the indoor mini-split head unit changing the setpoint to the desired Day or Night temperature setting automatically base on the photocell sensor status.
*Note: The ARS-1 is currently not compatible with the following brands of devices: Daiken, Mr. Cool, Innovair, Denali Aire, Cooper and Hunter.
*Firmware Update Note: To update firmware on the TrolMaster's controllers and modules, you must use a Micro SD card that is 32GB or less capacity.
Package Content
1 x AC Remote Station (ARS-1)
1 x Signal Emitter
1 x 16ft RJ12 Cable
1 x 4ft RJ12 Cable
1 x RJ12 T-Splitter
The BETA-8 CO2 controller offers a precision CO2 NDIR sensor / controller in an affordable easy-to-use package. The BETA-8 features a high-quality remote CO2 sensor (with 16ft cable) and built-in photocell to automatically activate your supplemental CO2 system to maintain CO2 PPM levels only during daylight hours. The BETA-8 also has adjustable deadband and min-max recall. It also has a ‘fuzzy-logic’ feature which will more accurately control compressed CO2 systems.The CO2 sensor can be easily re-calibrated and will continue to operate accurately for many years.
For use with Co2 generators or compressed Co2
TROLMASTER - HYDRO X CO2 CONTROL STATION
The TrolMaster DSC-2 CO2 control / device module allows user to easily connect and control standard supplemental CO2 devices or CO2 exhaust controls to the Hydro-x. Any CO2 device that is 10-amps @ 240 volts or less can be controlled by the DSC-2
SPECIFICATIONS:
Input Voltage: 100~240 VAC, 50/60Hz
LED status:* Blinking green FAST: If the LED is blinking quickly, that means the module has not been addressed to the controller OR that module does not have a good connection to the controller. *Pressing the small button on the module will address/link the module when first installed.* Blinking green SLOW: If you see a slowly blinking green LED, that means the module is addressed and connected to the controller, and the module is currently turned OFF.* SOLID green: If you see the LED is on solid (no blinking) that means the modules are addressed, connected and currently turned ON.* Blinking red: If you see the LED change to blinking red, that means the module has been overloaded. To reset the overload unplug the module from the power.
CO2 Sensor for Hydro-X only（MBS-S8） The optional CO2 Sensor (MBS-S8) measures the CO2 PPM within the growing area. Using the MBS-S8 allows the users to connect and control their supplemental CO2 system using the Hydro-X. *Used in combination with one or more DSC-1 CO2 device modules.
"Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"
Hydro-X Environment Control System （HCS-1）
The Hydro-X system is a professional-grade single zone environmental system. It is fully customizable and modularly designed. Installation is simple and the system is easy to expand upon. The Hydro-X system can control most grow lights brands, HVAC systems, mini-split air conditioners, commercial dehumidifiers and humidifiers, as well as CO2 generators or regulators. With the free TrolMaster App, the user can access all of the settings and alerts on the system from anywhere at anytime.
*The HCS-1 is the brain of the Hydro-X system. It comes with a 3-in-1 Temp/Humid/Photocell sensor.
*Internet Connection Note: TrolMaster's main controllers can be connected to the internet in order to use the available APP. Most internet services available including land-based and cellular internet are compatible. However, HughesNet / Viasat Satellite internet is NOT compatible with TrolMaster controllers at this time.
Data Record Note: The HCS-1 can record the data coming in from the sensors onto a CSV file. To use this feature, you must first insert a MicroSD card 32GB or less into the MicroSD slot on the bottom of the HCS-1 or NFS-1 controllers. Once the card is inserted, the unit will automatically store data so it can be viewed later.
240V Humidity Device Station（DSH-2）(To fit NZ plugs, Not pictured) The TrolMaster DSH-2 Humidity control / device modules (240V) allow the user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-x. The DSH modules are rated @ 10-amps. *Use with dehumidifiers less than 7 amps to avoid current overload.
LED status:* Blinking green FAST: If the LED is blinking quickly, that means the module has not been addressed to the controller OR that module does not have a good connection to the controller. *Pressing the small button on the module will address/link the module when first installed.* Blinking green SLOW: If you see a slowly blinking green LED, that means the module is addressed and connected to the controller, and the module is currently turned OFF.* SOLID green: If you see the LED is on solid (no blinking) that means the modules are addressed, connected and currently turned ON.* Blinking red: If you see the LED change to blinking red, that means the module has been overloaded. To reset the overload unplug the module from the power.
240V Temperature Device Station（DST-2）*Suited for Nz plugs (not pictured) The TrolMaster DST-2 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. Any heating or cooling device that is 10-amps @ 240 volts or less can be controlled by the DST-2.
LED status:* Blinking green FAST: If the LED is blinking quickly, that means the module has not been addressed to the controller OR that module does not have a good connection to the controller. *Pressing the small button on the module will address/link the module when first installed.* Blinking green SLOW: If you see a slowly blinking green LED, that means the module is addressed and connected to the controller, and the module is currently turned OFF.* SOLID green: If you see the LED is on solid (no blinking) that means the modules are addressed, connected and currently turned ON.* Blinking red: If you see the LED change to blinking red, that means the module has been overloaded. To reset the overload unplug the module from the power.
LED Power Indicator
RJ12 Cable Socket
Addressing
Plug & Play
The revolution continues with the even larger T96. All the great features you've come to love - but now in a larger system for ultimate growers.The TurboKlone gives you a stronger, longer-lasting product thanks to its smart design and use of innovative technology. IT'S JUST SO COOL!The fan system provides constant oxygen to the growing chamber and, most importantly, combats high temperatures by circulating cool air throughout the unit. The innovative fan system fits like a glove on the side of the reservoir—keeping the unit free from dangling parts and tangling cords like other systems on the market. AHEAD OF THE CURVEWhile other cloning machines are designed with straight lines and angles that resemble storage containers and planter boxes, the TurboKlone has sleek, rounded edges and curved walls that give it greater strength and resilience from external and internal forces. And those curves aren't just for good looks! Its sleek, rounded design makes cleaning the TurboKlone a breeze! You don't have to worry about bacteria hanging around in tight corners. MORE IS BETTERWhy settle for less when you can have more. Klone sites that is! TurboKlone's T96 gives you 96 clone sites—60% more than other systems on the market. The best part? You get more sites without taking up more space!
Reservoir: Custom ABS Plastic
Clone Capacity: 96
Cutting Medium: Custom Polyethylene Collar (included)
Water Pump Grade: 450 gph
Optimal Water Temp: 65-75° F.
Optimal Amount of Water: 8.5-9 gallons
Optimal Water PH: 5.5-6.3
Product Dimensions: 33 x 22 3/4 x 11 5/8
Recommended Lighting: T8 or T5 Florescent or Natural
Introducing the ULight LED Grow Light - 1000W, the ideal choice for enthusiasts of indoor gardening. Discover the power of this innovative grow light, which will revolutionise the way you care for your plants.
This grow light improves your growing activities by focusing on advantages, simple management, and great quality. In accordance with the specific needs of your plants, adjust the brightness to ensure optimal growth at each stage. You have complete control over the entire process, from germination to flowering.
This grow light, which has been manufactured using top-notch materials, has a high-efficiency rating of 2.9 umol/j. It guarantees continuous performance and maximum longevity with 5040 high-quality diodes and a dependable driver. With its 680W power output, the ULight LED Grow Light offers exceptional energy efficiency.
By providing 2.9 umol/j, it minimizes energy consumption while maximizing plant growth, saving you money on electricity bills.
FEATURES
High-Power Efficiency: 1000W output with excellent 2.9μmol/J efficacy Premium Components: 5040 high-quality Samsung LEDs Complete Protection:
IP65 rating for dust/water resistance
Flexible Control: Multiple dimming options, including 0- 10V analog
Optimal Spectrum: 3300K colour temperature is ideal for flowering
Robust Construction: Heavy-duty 16kg unit with minimal packaging weight
Australian Ready: Includes AU plug for local compatibility Long-Term Reliability: Backed by a 3-year manufacturer's warranty
Ulight 100 Watt Intercanopy LED
Power Lead included. Light Stand, Dimmer and link cables sold separately
Great results require the best equipment. Maximize plant growth and yield with the ULight Intercanopy 100W LED. Designed for placement within the plant canopy, it delivers full-spectrum light to promote healthy growth at all stages—seedling, vegetative, and flowering. With the ability to link up to 18 lights in series and versatile mounting options, it’s perfect for greenhouses and indoor farms. Durable and reliable, this grow light comes with a 3-year warranty for long-term performance.
LEG / STAND HEIGHT 23CM
Specifications:Full Spectrum Grow LightLink up to 18 lights in series using one power lead.Can be mounted in any orientationPerfect for professional growers looking for high-efficiency lighting solutions.Max. Power: 100W ± 3%Nominal Voltage: 200V – 277VNominal Current: 0.36A – 0.5APower Factor: >0.95 @ 100WInput Frequency: 50 – 60HzPlug Type: AUEfficacy: 2.9 µmol/JOutput: 290 PPFPhoton Flux: 18080 lmColor Temperature: 3350KSize: 1100 x 103 x 87mmWeight: 2.1 kgIP Rating: IP65Diodes: SamsungDiodes Quantity: 270 pcsBeam Angle: 150°Dimming: 0-10V or 20%, 40%, 60%, 80%, 100%Temperature Range: -20°C to 40°COperation Humidity: 10% to 95% RHCertifications: CE, RoHS, RCMWarranty Time: 3 years
AeroLush C08 Intelligent Air Conditioner, 4-in-1 Function, with Temperature & Humidity Sensor Probe, Designed for Growing Environments.
Superior Climate Control: With an 8000 BTU compressor and precision Sensirion sensors, this air conditioner provides real-time temperature, humidity, and VPD monitoring, ensuring the ideal climate for your grow space
4-in-1 Versatility: Offers cooling, drying, heating, and fan modes, delivering complete climate control for optimal plant growth year-round
Smart Control: Connects to the VIVOSUN app for remote monitoring and control, seamlessly integrating with the VIVOSUN Smart Grow System for automated synchronization with other devices
Easy Setup & Mobility: No wall installation needed; portable design with built-in handles and caster wheels for flexible placement in any grow space
Maintenance-Free Design: Features a self-evaporating system and auto-restart after power outages, ensuring hassle-free, continuous operation
Recommended Compatibility: Recommended for grow tents up to 5x5 ft. Actual performance may vary depending on ambient temperature, humidity, and tent size. For best performance, keep the duct fan at level 0 or 1. Higher fan speeds may impact efficiency.
Explore commercial growing equipment for professional and large-scale grow setups. This collection brings together climate control, automation, irrigation, lighting, monitoring and propagation products designed to help improve consistency, efficiency and crop performance.
